Improved model control strategy with dynamic adaptation for heat exchangers in energy system

References

• X. Luo, X. Guan, M. Li, and W. Roetzel, “Dynamic behavior of one-dimensional flow multi-stream heat exchangers and their networks,” Int. J. Heat Mass Transfer, vol. 46, no. 4, pp. 705–715, 2003.
   Web of Science ®Google Scholar
• S. Bittanti and L. Piroddi, “Nonlinear identification and control of a heat exchanger: A neural network approach,” J. Franklin Inst., vol. 334, no. 1, pp. 135–153, 1997.
   Web of Science ®Google Scholar
• W. Driedger, “Controlling steam heaters,” Hydrocarbon Process., vol. 75, no. 11, pp. 111–132, 1996.
   Google Scholar
• P. Heggs and I. Abid, “Heat exchanger control by stream(s) by-pass,” in Design and Operation of Heat Exchangers, Springer Berlin Heidelberg, vol. 18, 1992, pp. 39–49.
   Google Scholar
• J. Ni, G. Cui, H. Jiang, and X. Hu, “Flexibility identification and operation optimization based on by-pass adjustment of heat exchanger networks,” Chem. Ind. Eng. Prog., vol. 29, no. 1, pp. 19–24, 2010 ( in Chinese).
   Google Scholar
• A. W. Alsop and T. F. Edgar, “Nonlinear heat exchanger control through the use of partially linearized control variables,” Chemical Engineering Communications, vol. 75, no. 1, pp. 1006–1013, 1986.
   Google Scholar
• S. Das and T. Dan, “Transient response of a parallel flow shell-and-tube heat exchanger and its control,” Heat Mass Transfer, vol. 31, no. 4, pp. 231–235, 1996.
   Web of Science ®Google Scholar
• M. Ismail, A. Fartaj, and M. Karimi, “Numerical investigation on heat transfer and fluid flow behaviors of viscous fluids in a minichannel heat exchanger,” Numer. Heat Transfer, Part A Appl., vol. 64, no. 1, pp. 1–29, 2013.
   Web of Science ®Google Scholar
• Z. M. Lin and L. B. Wang, “A multi-domain coupled numerical method for a flat tube bank fin heat exchanger with delta-winglet vortex generators,” Numer. Heat Transfer, Part A Appl., vol. 65, no. 12, pp. 1204–1229, 2014.
   Web of Science ®Google Scholar
• A. H. Saberi and M. Kalteh, “Numerical investigation of nanofluid flow and conjugated heat transfer in a micro-heat-exchanger using the lattice Boltzmann method,” Numer. Heat Transfer, Part A Appl., vol. 70, no. 12, pp. 1390–1401, 2016.
   Web of Science ®Google Scholar
• Z. Zhao et al., “Numerical investigation on conjugate heat transfer to supercritical CO2 in membrane helical coiled tube heat exchangers,” Numer. Heat Transfer, Part A Appl., vol. 69, no. 9, pp. 977–995, 2016.
   Web of Science ®Google Scholar
• X. Chen, F. Tavakkoli, and K. Vafai, “Analysis and characterization of metal foam-filled double-pipe heat exchangers,” Numer. Heat Transfer, Part A Appl., vol. 68, no. 10, pp. 1031–1049, 2015.
   Web of Science ®Google Scholar
• H. S. K. P. Yuan, “Effect of longitudinal separator sheet conduction on the transient thermal response of crossflow heat exchangers with neither gas mixed,” Numer. Heat Transfer, Part A Appl., vol. 25, no. 2, pp. 223–236, 1994.
   Web of Science ®Google Scholar
• F. Bagui and H. Chafouk, “Transient heat transfer in coflow heat exchanger,” Heat Mass Transfer, vol. 42, no. 9, pp. 835–841, 2006.
   Web of Science ®Google Scholar
• M. R. Ansari and V. Mortazavi, “Transient response of a co-current heat exchanger to an inlet temperature variation with time using an analytical and numerical solution,” Numer. Heat Transfer, Part A Appl., vol. 52, no. 1, pp. 71–85, 2007.
   Web of Science ®Google Scholar
• N. Srihari and S. K. Das, “Transient response of multi-pass plate heat exchangers considering the effect of flow maldistribution,” Chem. Eng. Process. Process Intensif., vol. 47, no. 4, pp. 695–707, 2008.
   Web of Science ®Google Scholar
• F. Romie, “Response of counterflow heat exchangers to step changes of flow rates,” J. Heat Transfer, vol. 121, no. 3, pp. 746–748, 1999.
   Web of Science ®Google Scholar
• M. Lachi, N. E. Wakil, and J. Padet, “The time constant of double pipe and one pass shell-and-tube heat exchangers in the case of varying fluid flow rates,” Int. J. Heat Mass Transfer, vol. 40, no. 9, pp. 2067–2079, 1997.
   Web of Science ®Google Scholar
• Y. Wang, Y. L. He, Y. S. Li, and Z. D. Cheng, “Theoretical study of air-side volatility effects on the performance of H-type finned heat exchangers in waste heat utilization,” Numer. Heat Transfer, Part A Appl., vol. 70, no. 6, pp. 613–638, 2016.
   Web of Science ®Google Scholar
• K. Gu and S. I. Niculescu, “Survey on recent results in the stability and control of time-delay systems,” J. Dyn. Syst. Meas. Control, vol. 125, no. 2, pp. 158–165, 2003.
   Web of Science ®Google Scholar
• A. Khan, N. Baker, and A. Wardle, “The dynamic characteristics of a countercurrent plate heat exchanger,” Int. J. Heat Mass Transfer, vol. 31, no. 6, pp. 1269–1278, 1988.
   Web of Science ®Google Scholar
• S. Nangle-Smith and J. Cotton, “EHD-based load controllers for R134a convective boiling heat exchangers,” Appl. Energy, vol. 134, no. 134, pp. 125–132, 2014.
   Web of Science ®Google Scholar
• D. Ball, “Optimum feedforward control of distributed parameter systems,” Int. J. Syst. Sci., vol. 8, no. 1, pp. 81–85, 1977.
   Web of Science ®Google Scholar
• I. Tanabe and K. Yanagi, “Dual cooling jacket around spindle bearings with feed-forward temperature control system to decrease thermal deformation,” JSME Int. J., Ser. C, vol. 39, no. 1, pp. 149–155, 1996.
   Google Scholar
• J. A. Paraskos and T. McAvoy, “Feedforward computer control of a class of distributed parameter processes,” AIChE J., vol. 16, no. 5, pp. 754–761, 1970.
   Web of Science ®Google Scholar
• T. A. Horst, H. S. Rottengruber, M. Seifert, and J. Ringler, “Dynamic heat exchanger model for performance prediction and control system design of automotive waste heat recovery systems,” Appl. Energy, vol. 105, no. 1, pp. 293–303, 2013.
   Web of Science ®Google Scholar
• A. H. González, D. Odloak, and J. L. Marchetti, “Predictive control applied to heat-exchanger networks,” Chem. Eng. Process. Process Intensif., vol. 45, no. 8, pp. 661–671, 2006.
   Web of Science ®Google Scholar
• A. Mazinan and N. Sadati, “Fuzzy multiple modeling and fuzzy predictive control of a tubular heat exchanger system,” presented at the 7th WSEAS International Conference on Applied Computer and Applied Computational Science: World Scientific and Engineering Academy and Society (WSEAS), Hangzhou, China, April 6–8, 2008.
   Google Scholar
• M. J. Kharaajoo and B. N. Araabi, “Neural network based predictive control of a heat exchanger nonlinear process,” Istanbul Univ. J. Elec. Electron. Eng., vol. 4, pp. 1219–1226, 2004.
   Google Scholar
• A. H. Mazinan and N. Sadati, “Fuzzy predictive control based multiple models strategy for a tubular heat exchanger system,” Appl. Intell., vol. 33, no. 3, pp. 247–263, 2010.
   Web of Science ®Google Scholar
• J. Široký, F. Oldewurtel, J. Cigler, and S. Prívara, “Experimental analysis of model predictive control for an energy efficient building heating system,” Appl. Energy, vol. 88, no. 9, pp. 3079–3087, 2011.
   Web of Science ®Google Scholar
• W. Gang and J. Wang, “Predictive ANN models of ground heat exchanger for the control of hybrid ground source heat pump systems,” Appl. Energy, vol. 112, no. 16, pp. 1146–1153, 2013.
   Web of Science ®Google Scholar
• S. Quoilin et al., “Dynamic modeling and optimal control strategy of waste heat recovery Organic Rankine Cycles,” Appl. Energy, vol. 88, no. 6, pp. 2183–2190, 2011.
   Web of Science ®Google Scholar
• K. Keniar, K. Ghali, and N. Ghaddar, “Study of solar regenerated membrane desiccant system to control humidity and decrease energy consumption in office spaces,” Appl. Energy, vol. 138, pp. 121–132, 2015.
   Web of Science ®Google Scholar
• J. Patel, K. Uygun, and Y. Huang, “A path constrained method for integration of process design and control,” Comput. Chem. Eng., vol. 32, no. 7, pp. 1373–1384, 2008.
   Web of Science ®Google Scholar