Numerical investigation on supercritical turbulent heat transfer of copper/n-decane nanofluid inside a miniature tube

References

• H. Huang, L. J. Spadaccini, and D. R. Sobel, “Fuel-cooled thermal management for advanced aero engines,” J. Eng. Gas. Turbines Power-Trans. ASME, vol. 126, pp. 284–293, 2004. DOI: 10.1115/1.1689361.
   Web of Science ®Google Scholar
• P. Caisso, A. Souchier, C. Rothmund, P. Alliot, C. Bonhomme, W. Zhinner, R. Parsley, T. Neill, S. Forde, R. Starke, et al., “A liquid propulsion panorama,” Acta Astronaut., vol. 65, pp. 1723–1737, 2009. DOI: 10.1016/j.actaastro.2009.04.020.
   Web of Science ®Google Scholar
• H. Huang, D. R. Sobel, and L. J. Spadaccini, “Endothermic heat-sink of hydrocarbon fuels for scramjet cooling,” 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, AIAA 2002-3871, Indianapolis, Indiana, 2002.
   Google Scholar
• A. Chen and L. Dang, “Characterization of supercritical JP-7’s Heat transfer and coking properties,” 40th AIAA Aerospace Sciences Meeting & Exhibit, AIAA 2002-0005, Reno, NV, 2002.
   Google Scholar
• F. Zhong, X. Fan, G. Yu, J. Li, and C. J. Sung, “Heat transfer of aviation kerosene at supercritical conditions,” J. Thermophys. Heat Transfer, vol. 23, pp. 543–550, 2009. DOI: 10.2514/1.41619.
   Web of Science ®Google Scholar
• W. Zhou, Z. Jia, J. Qin, W. Bao, and B. Yu, “Experimental study on effect of pressure on heat sink of n-decane,” Chem. Eng. J., vol. 243, pp. 127–136, 2014. DOI: 10.1016/j.cej.2013.12.081.
   Web of Science ®Google Scholar
• Y. X. Hua, Y. Z. Wang, and H. Meng, “A numerical study of supercritical forced convective heat transfer of n-heptane inside a horizontal miniature tube,” J. Supercrit. Fluids, vol. 52, pp. 36–46, 2010. DOI: 10.1016/j.supflu.2009.12.003.
   Web of Science ®Google Scholar
• B. Ruan and H. Meng, “Supercritical heat transfer of cryogenic-propellant methane in rectangular engine cooling channels,” J. Thermophys. Heat Transfer, vol. 26, pp. 313–321, 2012. DOI: 10.2514/1.t3670.
   Web of Science ®Google Scholar
• A. Urbano and F. Nasuti, “Parametric analysis of heat transfer to supercritical-pressure methane,” J. Thermophys. Heat Transfer, vol. 26, pp. 450–463, 2012. DOI: 10.2514/1.t3840.
   Web of Science ®Google Scholar
• Y. Z. Wang, Y. X. Hua, and H. Meng, “Numerical studies of supercritical turbulent convective heat transfer of cryogenic-propellant methane,” J. Thermophys. Heat Transfer, vol. 24, pp. 490–500, 2012. DOI: 10.2514/1.46769.
   Web of Science ®Google Scholar
• K. Xu, L. Tang, and H. Meng, “Numerical study of supercritical-pressure fluid flows and heat transfer of methane in ribbed cooling tubes,” Int. J. Heat Mass Transfer, vol. 84, pp. 346–358, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.041.
   Web of Science ®Google Scholar
• C. Carpenter, S. Verma, and J. S. Kapat, “Numerical study of enhancement of regenerative cooling using ribs,” 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA 2013-3996, San Jose, CA, 2013.
   Google Scholar
• M. Pizzarelli, F. Nasuti, M. Onofri, P. Roncioni, R. Votta, and F. Battista, “Heat transfer modeling for supercritical methane flowing in rocket engine cooling channels,” Appl. Therm. Eng., vol. 75, pp. 600–607, 2015. DOI: 10.1016/j.applthermaleng.2014.10.008.
   Web of Science ®Google Scholar
• H. Wang, Y. Luo, H. Gu, H. Li, T. Chen, J. Chen, and H. Wu, “Experimental investigation on heat transfer and pressure drop of kerosene at supercritical pressure in square and circular tube with artificial roughness,” Exp. Therm. Fluid Sci., vol. 42, pp. 16–24, 2012. DOI: 10.1016/j.expthermflusci.2012.03.009.
   Web of Science ®Google Scholar
• Y. Gan, Y. S. Lim, and L. Qiao, “Combustion of nanofluid fuels with the addition of boron and iron particles at dilute and dense concentrations,” Combust. Flame, vol. 159, pp. 1732–1740, 2012. DOI: 10.1016/j.combustflame.2011.12.008.
   Web of Science ®Google Scholar
• J. P. Meyer, S. A. Adio, M. Sharifpur, and P. N. Nwosu, “The viscosity of nanofluids: A review of the theoretical, empirical, and numerical models,” Heat Transfer Eng., vol. 37, pp. 387–421, 2015. DOI: 10.1080/01457632.2015.1057447.
   Web of Science ®Google Scholar
• W. Yu and D. M. France, “Review and comparison of nanofluid thermal conductivity and heat transfer enhancements,” Heat Transfer Eng., vol. 29, pp. 432–460, 2008. DOI: 10.1080/01457630701850851.
   Web of Science ®Google Scholar
• S. Kakaç and A. Pramuanjaroenkij, “Review of convective heat transfer enhancement with nanofluids,” Int. J. Heat Mass Transfer, vol. 52, pp. 3187–3196, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.02.006.
   Web of Science ®Google Scholar
• R. Taylor, S. Coulombe, T. Otanicar, and P. Phelan, “Small particles, big impacts: A review of the diverse applications of nanofluids,” J. Appl. Phys., vol. 113, pp. 11301, 2013. DOI: 10.1063/1.4754271.
   Web of Science ®Google Scholar
• J. A. Eastman, S. R. Phillpot, S. U. S. Choi, and P. Keblinski, “Thermal transport in nanofluids,” Annu. Rev. Mater. Res., vol. 34, pp. 219–246, 2004. DOI: 10.1146/annurev.matsci.34.052803.090621.
   Web of Science ®Google Scholar
• S. K. Das, S. U. S. Choi, and H. E. Patel, “Heat transfer in nanofluids-a review,” Heat Transfer Eng., vol. 27, pp. 319, 2006.
   Web of Science ®Google Scholar
• K. Kannaiyan, K. Anoop, and R. Sadr, “Effect of nanoparticles on the fuel properties and spray performance of aviation turbine fuel,” J. Energy Resour. Technol.-Trans. ASME, vol. 139, pp. 032201, 2017. DOI: 10.1115/1.4034858.
   Web of Science ®Google Scholar
• F. Shariatmadar and S. Pakdehi, “Synthesis and characterization of aviation turbine kerosene nanofluid fuel containing boron nanoparticles,” Energy Fuels, vol. 30, pp. 7755–7762, 2016. DOI: 10.1021/acs.energyfuels.6b01370.
   Web of Science ®Google Scholar
• D. Agarwal, A. Vaidyanathan, and S. Kumar, “Experimental investigation on thermal performance of kerosene–graphene nanofluid,” Exp. Therm. Fluid Sci., vol. 71, pp. 126–137, 2016. DOI: 10.1016/j.expthermflusci.2015.10.028.
   Web of Science ®Google Scholar
• B. Ruan, X. Gao, and H. Meng, “Numerical modeling of turbulent heat transfer of a nanofluid at supercritical pressure,” Appl. Therm. Eng., vol. 113, pp. 994–1003, 2017. DOI: 10.1016/j.applthermaleng.2016.11.092.
   Web of Science ®Google Scholar
• K. Khanfar, K. Vafai, and M. Lightstone, “Buoyancy driven heat transfer enhancement in a two dimensional enclosure utilizing nanofluids,” Int. J. Heat Mass Transfer, vol. 46, pp. 3639–3653, 2003. DOI: 10.1016/s0017-9310(03)00156-x.
   Web of Science ®Google Scholar
• P. K. Namburu, D. K. Das, K. M. Tanguturi, and R. S. Vajjha, “Numerical study of turbulent flow and heat transfer characteristics of nanofluids considering variable properties,” Int. J. Therm. Sci., vol. 48, pp. 290–302, 2009. DOI: 10.1016/j.ijthermalsci.2008.01.001.
   Web of Science ®Google Scholar
• A. Kamyar, R. Saidur, and M. Hasanuzzaman, “Application of computational fluid dynamics (CFD) for nanofluids,” Int. J. Heat Mass Transfer, vol. 55, pp. 4104–4115, 2012. DOI: 10.1016/j.ijheatmasstransfer.2012.03.052.
   Web of Science ®Google Scholar
• Fluent Inc., “Fluent 6.3 User Guide,” NH, USA: Fluent Inc., 2006.
   Google Scholar
• B. Ruan, H. Meng, and V. Yang, “Simplification of pyrolytic reaction mechanism and turbulent heat transfer of n-decane at supercritical pressures,” Int. J. Heat Mass Transfer, vol. 69, pp. 455–463, 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.10.045.
   Web of Science ®Google Scholar
• B. C. Pak and Y. I. Cho, “Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles,” Exp. Heat Transfer, vol. 11, pp. 151–170, 1998. DOI: 10.1080/08916159808946559.
   Web of Science ®Google Scholar
• Y. Xuan and W. Roetzel, “Conceptions for heat transfer correlation of nanofluids,” Int. J. Heat Mass Transfer, vol. 43, pp. 3701–3707, 2000. DOI: 10.1016/s0017-9310(99)00369-5.
   Web of Science ®Google Scholar
• J. Buongiorno, “Convective transport in nanofluids,” ASME J. Heat Transfer, vol. 128, pp. 240–250, 2006. DOI: 10.1115/1.2150834.
   Web of Science ®Google Scholar
• H. C. Brinkman, “The viscosity of concentrated suspensions and solutions,” J. Chem. Phys., vol. 20, pp. 571, 1952. DOI: 10.1063/1.1700493.
   Web of Science ®Google Scholar
• R. L. Hamilton and O. K. Crosser, “Thermal conductivity of heterogeneous two-component systems,” Ind. Eng. Chem. Fundam., vol. 1, pp. 187–191, 1962. DOI: 10.1021/i160003a005.
   Web of Science ®Google Scholar
• T. A. Ward, J. S. Ervin, S. Zabarnick, and L. Shafer, “Pressure effects on flowing mildly-cracked n-decane,” J. Propul. Power, vol. 21, pp. 344–355, 2005. DOI: 10.2514/1.6863.
   Web of Science ®Google Scholar
• U. Rea, T. McKrell, L. Hu, and J. Buongiorno, “Laminar convective heat transfer and viscous pressure loss of alumina-water and zirconia-water nanofluids,” Int. J. Heat Mass Transfer, vol. 52, pp. 2042–2048, 2009. DOI: 10.1016/j.ijheatmasstransfer.2008.10.025.
   Web of Science ®Google Scholar
• Y. Xuan and Q. Li, “Investigation on convective heat transfer and flow features of nanofluids,” ASME J. Heat Transfer, vol. 125, pp. 151–155, 2003. DOI: 10.1115/1.1532008.
   Web of Science ®Google Scholar
• K. Xu, B. Ruan, and H. Meng, “A thermal performance factor for evaluation of active engine cooling with asymmetric heating,” Appl. Therm. Eng., vol. 73, pp. 351–356, 2014. DOI: 10.1016/j.applthermaleng.2014.07.066.
   Web of Science ®Google Scholar
• M. Pizzarelli, A. Urbano, and F. Nasuti, “Numerical analysis of deterioration in heat transfer to near-critical rocket propellants,” Numer. Heat Tranfer Part A Appl., Vol. 57, pp. 297–314, 2010. DOI: 10.1080/10407780903583016.
   Web of Science ®Google Scholar