References
- R. Zhao, S. Zhang, J. Liu, and J. Gu, “A review of thermal performance improving methods of lithium ion battery: electrode modification and thermal management system,” J. Power Sources, vol. 299, pp. 557–577, 2015. DOI: 10.1016/j.jpowsour.2015.09.001.
- I. Dincer, H. S. Hamut, and N. Javani, Thermal Management of Electric Vehicle Battery Systems. Wiley, 2017, West Sussex, United Kingdom.
- L. Ungurean, G. Cârstoiu, M. V. Micea, and V. Groza, “Battery state of health estimation: A structured review of models, methods and commercial devices,” Int. J. Energy Res., vol. 41, pp. 151–181, 2017. DOI: 10.1002/er.3598.
- “Ferrari LaFerrari: First Hybrid with 963 CV - Ferrari.com.” Available: http://auto.ferrari.com/en_EN/sports-cars-models/car-range/laferrari/. Accessed: July 22, 2017.
- T. M. Bandhauer, S. Garimella, and T. F. Fuller, “A critical review of thermal issues in lithium-in batteries,” J. Electrochem. Soc., vol. 158, pp. R1, 2011. DOI: 10.1149/1.3515880.
- T. Waldmann, M. Wilka, M. Kasper, M. Fleischhammer, and M. Wohlfahrt-Mehrens, “Temperature dependent ageing mechanisms in lithium-ion batteries – A post-mortem study,” J. Power Sources, vol. 262, pp. 129–135, 2014. DOI: 10.1016/j.jpowsour.2014.03.112.
- M. M. Kabir and D. E. Demirocak, “Degradation mechanisms in li-ion batteries: A state-of-the-art review,” Int. J. Energy Res., vol. 41, no. 14, pp. 1963–1986, 2017. DOI: 10.1002/er.3762.
- D. Doughty and E. P. Roth, “A general discussion of Li ion battery safety,” Electrochem. Soc. Interface, vol. 21, pp. 37–44, 2012. DOI: 10.1149/2.F03122if.
- P. Ramadass, B. Haran, R. White, and B. N. Popov, “Capacity fade of Sony 18650 cells cycled at elevated temperatures. Part II. Capacity fade analysis,” J. Power Sources, vol. 112, pp. 614–620, 2002.
- X. Xiaoming, J. Fu, H. Jiang, and R. He, “Research on the heat dissipation performance of lithium-ion cell with different operating conditions,” Int. J. Energy Res., vol. 41, no. 11, pp. 1642–1654, 2017. DOI: 10.1002/er.3682.
- L. H. Saw, Y. Ye, A. A. D. Tay, W. T. Chong, S. H. Kuan, M. C. Yew, and L. K. Chian, “Computational fluid dynamic and thermal analysis of lithium-ion battery pack with air cooling,” Appl. Energy, vol. 177, pp. 783–792, 2016. DOI: 10.1016/j.apenergy.2016.05.122.
- S. Al Hallaj and J. R. Selman, “A novel thermal management system for electric vehicle batteries using phase-change material,” J. Electrochem. Soc., vol. 147, pp. 3231–3236, 2000.
- N. Javani, I. Dincer, and G. F. Naterer, “Numerical modeling of submodule heat transfer with phase change material for thermal management of electric vehicle battery packs,” J. Therm. Sci. Eng. Appl., vol. 7, pp. 31005–31015, 2015. DOI: 10.1115/1.4029053.
- M. Y. Ramandi, I. Dincer, and G. F. Naterer, Heat transfer and thermal management of electric vehicle batteries with phase change materials, Heat Mass Transf. vol. 47, pp. 777–788, 2011. DOI: 10.1007/s00231-011-0766-z.
- S. A. Khateeb, S. Amiruddin, M. Farid, J. R. Selman, and S. Al-Hallaj, “Thermal management of Li-ion battery with phase change material for electric scooters: Experimental validation” J. Power Sources, vol. 142, pp. 345–353, 2005. DOI: 10.1016/j.jpowsour.2004.09.033.
- S. Panchal, R. Khasow, I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Fowler, “Thermal design and simulation of mini-channel cold plate for water cooled large sized prismatic lithium-ion battery,” Appl. Therm. Eng., vol. 122, pp. 80–90, 2017. DOI: 10.1016/j.applthermaleng.2017.05.010.
- S. Panchal, I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Fowler, “Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery,” Int. J. Heat Mass Transfer, vol. 109, pp. 1239–1251, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.03.005.
- S. Panchal, I. Dincer, M. Agelin-Chaab, R. Fraser, and M. Fowler, “Experimental and theoretical investigations of heat generation rates for a water cooled LiFePO4 battery,” Int. J. Heat Mass Transfer, vol. 101, pp. 1093–1102, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.05.126.
- C. Zamfirescu and I. Dincer, “Ammonia as a green fuel and hydrogen source for vehicular applications,” Fuel Process. Technol., vol. 90, pp. 729–737, 2009. DOI: 10.1016/j.fuproc.2009.02.004.
- I. Dincer and C. Zamfirescu, “Methods and apparatus for using ammonia as sustainable fuel, refrigerant and NOx reduction agent,” U.S. 8272353 B2, 2011.
- M. F. Ezzat and I. Dincer, “Development, analysis and assessment of fuel cell and photovoltaic powered vehicles,” Int. J. Hydrogen Energy, vol. 129, pp. 284–292, 2017. DOI: 10.1016/j.ijhydene.2017.05.065.
- M. Chen, F. Bai, W. Song, J. Lv, S. Lin, Z. Feng, Y. Li, and Y. Ding, “A multilayer electro-thermal model of pouch battery during normal discharge and internal short circuit process,” Appl. Therm. Eng., vol. 120, pp. 506–516, 2017. DOI: 10.1016/j.applthermaleng.2017.03.135.
- A. Griesmer. “What is COMSOL multiphysics?,” 2013. Available: https://www.comsol.com/blogs/what-is-comsol-multiphysics/. Accessed: August 28, 2017.
- EES: Engineering Equation Solver. “F-chart software: Engineering software.” Available: http://www.fchart.com/ees/. Accessed: August 28, 2017.
- M. Doyle, “Comparison of modeling predictions with experimental data from plastic lithium ion cells,” J. Electrochem. Soc., vol. 143, pp. 1890–1903, 1996. DOI: 10.1149/1.1836921.
- A. A. Pesaran, “Battery thermal models for hybrid vehicle simulations,” J. Power Sources, vol. 110, pp. 377–382, 2002. DOI: 10.1016/S0378-7753(02)00200-8.
- A. Bates, S. Mukherjee, N. Schuppert, B. Son, J. G. Kim, and S. Park, “Modeling and simulation of 2D lithium-ion solid state battery,” Int. J. Energy Res., vol. 39, pp. 1505–1518, 2015. DOI: 10.1002/er.3344.
- G. Karimi and X. Li, “Thermal management of lithium-ion batteries for electric vehicles,” Int. J. Energy Res., vol. 37, pp. 13–24, 2013. DOI: 10.1002/er.1956.
- M. Al-Zareer, I. Dincer, and M. A. Rosen, “Novel thermal management system using boiling cooling for high- 435 powered lithium-ion battery packs for hybrid electric vehicles,” J. Power Sources, vol. 363, pp. 291–303, 2017. DOI: 10.1016/j.jpowsour.2017.07.067.
- M. Al-Zareer, I. Dincer, and M. A. Rosen, “Electrochemical modeling and performance evaluation of a new ammonia-based battery thermal management system for electric and hybrid electric vehicles,” Electrochim. Acta, vol. 247, pp. 171–182, 2017. DOI: 10.1016/j.electacta.2017.06.162.