On the improvement of film cooling performance using tree-shaped network holes: A comparative study

References

• I. Shoko et al., “Conceptual design and cooling blade development of 1700 °C class high-temperature gas turbine,” ASME Turbo Expo 2003: Power for Land, Sea and Air, 2003. Paper No. GT 2003-38352.
   Google Scholar
• D. K. Hennecke, Turbine Cooling in Aeroengines. Belgium: Von Karman Inst, 1982.
   Google Scholar
• J. Liu et al., “Heat transfer enhancement and turbulent flow in a high aspect ratio channel (4:1) with ribs of various truncation types and arrangements,” Int. J. Therm. Sci., vol. 123, pp. 99–116, 2018.
   Web of Science ®Google Scholar
• C. J. Zhang et al., “The effect of weak crossflow on the heat transfer characteristics of short-distance impinging cooling, ASME J. Heat Transfer, vol. 136, pp. 1–10, 2014.
   Web of Science ®Google Scholar
• G. N. Xie, X. T. Liu, and H. B. Yan, “Film cooling performance and flow characteristics of internal cooling channels with continuous/truncated ribs,” Int. J. Heat Mass Transfer, vol. 105, pp. 67–75, 2017.
   Web of Science ®Google Scholar
• G. N. Xie, X. T. Liu, H. B. Yan, and J. Qin, “Turbulent flow characteristics and heat transfer enhancement in a square channel with various crescent ribs on one wall,” Int. J. Heat Mass Transfer, vol. 115, pp. 283–295, 2017.
   Web of Science ®Google Scholar
• R. S. Bunker, “A review of shaped hole turbine film-cooling technology,” ASME J. Heat Transfer, vol. 127, pp. 441–453, 2005.
   Web of Science ®Google Scholar
• J. R. Sargison, S. M. Guo, M. L. G. Oldfield, G. D. Lock, and A. J. Rawlinson, “A converging slot-hole film-cooling geometry-part 1: Low-speed flat-plate heat transfer and loss,” ASME J. Turbomach., vol. 124, pp. 453–460, 2002.
   Web of Science ®Google Scholar
• J. F. Zhou, X. J. Wang, J. Li, and H. K. Lu, “CFD analysis of mist/air cooling on a flat plate with different hole types,” Numer. Heat Transfer, Part A, Vol. 71, pp. 1123–1140, 2017.
   Web of Science ®Google Scholar
• K. D. Lee, S. M. Kim, and K. Y. Kim, “Multi-objective optimization of a row of film cooling holes using an evolutionary algorithm and surrogate modeling,” Numer. Heat Transfer, Part A, vol. 63, pp. 623–641, 2013.
   Web of Science ®Google Scholar
• R. S. Bunker, “Film cooling effectiveness due to discrete holes within a transverse surface slot,” ASME Turbo Expo 2002: Power for Land, Sea and Air, 2002. Paper No. GT 2002-30178.
   Google Scholar
• T. F. Fric and R. P. Campbell, Method for improving the cooling effectiveness of a gaseous coolant stream which flows through a substrate, and related articles of manufacture, United States Patent 6353602, 2002.
   Google Scholar
• K. Kusterer, D. Bohn, T. Sugimoto, and R. Tanaka, “Double-jet ejection of cooling air for improved film cooling,” ASME J. Turbomach., vol. 129, pp. 677–687, 2007.
   Web of Science ®Google Scholar
• J. D. Heidmann and S. Ekkad, “A novel anti-vortex turbine film cooling hole concept,” ASME Turbo Expo 2007: Power for Land, Sea and Air, 2007. Paper No. GT 2007-27528.
   Google Scholar
• S. B. Islami, S. P. A. Tabrizi, and B. A. Jubran, “Computational investigation of film cooling from trenched holes near the leading edge of a turbine blade,” Numer. Heat Transfer, Part A, Vol. 53, pp. 308–322, 2008.
   Web of Science ®Google Scholar
• L. Zhang, B. Hu, and H. R. Dong, “Influence of injection angle on film cooling efficiency,” J. Chin. Soc. Power Eng., vol. 31, pp. 916–921, 2011.
   Google Scholar
• K. T. McGovern and J. H. Leylek, “A detailed analysis of film cooling physics: Part II-compound-angle injection with cylindrical holes,” ASME J. Turbomach., vol. 122, pp. 113–121, 2000.
   Web of Science ®Google Scholar
• S. Lorente and A. Bejan, “Heterogeneous porous media as multiscale structures for maximum flow access,” J. Appl. Phys., vol. 100, pp. 3203, 2006.
   Web of Science ®Google Scholar
• D. V. Pence, “Reduced pumping power and wall temperature in microchannel heat sinks with fractal-like branching channel networks,” Microsc. Thermophys. Eng. vol. 6, pp. 319–330, 2002.
   Google Scholar
• Y. P. Chen and P. Cheng, “Heat transfer and pressure drop in fractal tree-like microchannel nets,” Int. J. Heat Mass Transfer, vol. 45, pp. 2643–2648, 2002.
   Web of Science ®Google Scholar
• Z. M. Ming, “Compact thermal model and its verification of a fractal tree-like microchannel cooler with high temperature uniformity (PhD Thesis), Huazhong University of Science and Technology, Wuhan, China, 2013.
   Google Scholar
• S. Kim, S. Lorente, and A. Bejan, “Dendritic vascularization for countering intense heating from the side,” Int. J. Heat Mass Transfer, vol. 51, pp. 5877–5886, 2008.
   Web of Science ®Google Scholar
• A. Bejan and S. Lorente, Design with Constructal Theory. Hoboken: Wiley, 2008.
   Google Scholar
• E. Weibei, Symmorphosis: On form and Function in Shaping Life. Cambridge, MA: Harvard University Press, 2000.
   Google Scholar
• ANSYS CFX-Solver Theory Guide.
   Google Scholar
• X. Lu, P. Jiang, H. Sugishita, H. Uechi, and K. Suenaga, “Conjugate heat transfer analysis of film cooling flows,” Int. J. Therm. Sci., vol. 15, pp. 85–91, 2006.
   Google Scholar
• M. G. Ghorab, “Adiabatic and conjugate cooling effectiveness analysis of a new hybrid scheme,” Int. J. Therm. Sci., vol. 50, pp. 965–983, 2011.
   Web of Science ®Google Scholar
• M. Silieti, A. J. Kassab, and E. Divo, “Film cooling effectiveness: comparison of adiabatic and conjugate heat transfer CFD models,” Int. J. Therm. Sci., vol. 48, pp. 2237–2248, 2009.
   Web of Science ®Google Scholar
• C. L. Liu, H. R. Zhu, and J. T. Bai, “Effect of turbulent Prandtl number on the computation of film-cooling effectiveness,” Int. J. Heat Mass Transfer*, vol. 51, pp. 6208–6218, 2008.
   Web of Science ®Google Scholar