Surface temperature reduction by using dimples/protrusions in a realistic turbine blade trailing edge

References

• P. Martini, A. Schulz, and H. J. Bauer, “Film cooling effectiveness and heat transfer on the trailing edge cutback of gas turbine airfoils with various internal cooling designs, ASME,” J. Turbomach., vol. 128, no. 1, pp. 196–205, 2006.
   Web of Science ®Google Scholar
• D. E. Metzger, R. A. Berry, and J. P. Bronson, “Developing heat transfer in rectangular ducts with staggered arrays of short pin fins,” J. Heat Transfer, vol. 104, no. 4, pp. 700–706, 1982.
   Web of Science ®Google Scholar
• D. E. Metzger, and S. W. Haley, “Heat transfer experiments and flow visualization for arrays of short pin fins,” ASME, New York, Paper No. 82-GT-138, 1982.
   Google Scholar
• J. J. Hwang, and C. C. Lui, “Measurement of endwall heat transfer and pressure drop in a Pin-Fin wedge duct,” Int. J. Heat Mass Transfer, vol. 45, no. 4, pp. 877–889, 2002.
   Web of Science ®Google Scholar
• C. Bianchini, B. Facchini, F. Simonetti, L. Tarchi, and S. Zecchi, “Numerical and experimental investigation of turning flow effects on innovative pin fin arrangements for trailing edge cooling configurations, ASME,” J. Turbomach., vol. 134, no. 2, pp. 021005, 2012.
   Web of Science ®Google Scholar
• G. Liao, X. Wang, X. Bai, D. Zhu, and J. Yao, “Numerical investigation on the Flow and Heat Transfer Characteristics of the Superheated Steam in the Wedge Duct with Pin-Fins,” ASME, New York, Paper No. GT2013-94205, 2000.
   Google Scholar
• J. J. Hwang, and C. C. Lu, “Lateral-flow effect on endwall heat transfer and pressure drop in a pin-fin trapezoidal duct of various pin shapes,” ASME, New York, Paper No. GT2000-0232, 2000.
   Google Scholar
• S. C. Siw, M. K. Chyu, and M. A. Alvin, “Heat transfer enhancement of internal cooling passage with triangular and semi-circular shaped pin-fin arrays,” ASME, New York, Paper No. GT2012-69266, 2012.
   Google Scholar
• J. Kruekels, S. Naik, A. Lerch, and A. Sedlov, “Heat transfer in a vane trailing edge passage with conical pins and pin-turbulator integrated configurations,” ASME, New York, Paper No. GT2014-25522, 2014.
   Google Scholar
• P. Ligrani, M. M. Oliveira, and T. Blaskovich, “Comparison of heat transfer augmentation techniques,” AIAA J., vol. 41, no. 3, pp. 337–362, 2003.
   Google Scholar
• P. Ligrani, “Heat transfer augmentation technologies for internal cooling of turbine components of gas turbine engine,” Int. J. Rotat. Mach., vol. 2013, pp. 1–32, 2013.
   Google Scholar
• C. N. Jordan, and L. M. Wright, “Heat transfer enhancement in a rectangular (AR =3:1) channel with V-shaped dimples,” ASME, New York, Paper No. GT2011-46128, 2011.
   Google Scholar
• J. Turnow, N. Kornev, V. Zhdanov, and E. Hassel, “Flow structures and heat transfer on dimples in a staggered arrangement,” Int. J. Heat Fluid Flow., vol. 35, pp. 168–175, 2012.
   Web of Science ®Google Scholar
• S. D. Hwang, H. G. Kwon, and H. H. Cho, “Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range,” Int. J. Heat Fluid Flow., vol. 29, no. 4, pp. 916–926, 2008.
   Web of Science ®Google Scholar
• L. Luo, W. Du, F. Wen, S. Wang, and Z. Zhao, “Convergence angles effect on the,” Heat Trans. Res., vol. 48, no. 14, pp. 1237–1262, 2017.
   Web of Science ®Google Scholar
• J. Lan, Y. Xie, and D. Zhang, “Heat transfer enhancement in a rectangular channel with the combination of ribs dimples and protrusions,” ASME, New York, Paper No. GT2011-46031, 2011.
   Google Scholar
• A. Murata, S. Nishida, H. Saito, K. Iwamoto, Y. Okita, and C. Nakamata, “Heat transfer enhancement due to combination of dimples, protrusions, and ribs in narrow internal passage of gas turbine blade,” ASME, New York, Paper No. GT2011-45356, 2011.
   Google Scholar
• L. Luo, C. Wang, L. Wang, B. Sundén, and S. Wang, “Heat transfer and friction factor performance in a pin fin wedge duct with different dimple arrangements,” Numer. Heat Transfer A Appl., vol. 69, no. 2, pp. 209–226, 2016.
   Web of Science ®Google Scholar
• L. Luo, W. Du, S. Wang, B. Sunden, and X. Zhang, “Flow structure and heat transfer characteristics of a 90°-turned Pin-Finned wedge duct with dimples at different locations,” Numer. Heat Transfer A Appl., vol. 73, no. 3, pp. 143–162, 2018.
   Web of Science ®Google Scholar
• Y. Rao, C. Wan, and Y. Xu, “An experimental study of pressure loss and heat transfer in the pin Fin-Dimple channels with various dimple depths,” Int. J. Heat Mass Transfer, vol. 55, no. 23–24, pp. 6723–6733, 2012.
   Web of Science ®Google Scholar
• L. Luo, C. Wang, L. Wang, B. Sundén, and S. Wang, “Heat transfer and friction factor in a Dimple-Pin fin wedge duct with various dimple depth and converging angle,” Int. J. Num. Meth. Heat Fluid Flow., vol. 26, no. 6, pp. 1954–1974, 2016.
   Web of Science ®Google Scholar
• ANSYS CFX, Reference Guide, Release, vol. 13, 2010.
   Google Scholar
• P. Dong, “Research on conjugate heat transfer simulation of aero turbine engine air-cooled vane,” Ph.D. thesis, Harbin Institute of Technology, Harbin, China, 2009.
   Google Scholar
• H. K. Versteeg, and W. Malalasekera, An Introduction to Computational Fluid Dynamics: The Finite Volume Method, 2nd ed., Essex, UK: Longman, 2007.
   Google Scholar
• F. R. Menter, “Two-Equation Eddy-Viscosity turbulence models for engineering applications,” AIAA J, vol. 32, no. 8, pp. 1598–1605, 1994.
   Web of Science ®Google Scholar
• L. D. Hylton, M. S. Milhec, E. R. Turner, D. A. Nealy, and R. E. York, “Analytical and experimental evaluation of the heat transfer distribution over the surface of turbine vanes,” NASA-CR, vol. 168015, 1983.
   Google Scholar