References
- B. Kongtragool and S. Wongwises, “A review of solar-powered Stirling engines and low temperature differential Stirling engines,” Renew. Sustain. Energ. Rev., vol. 7, no. 2, pp. 131–154, 2003.
- C. Cinar and H. Karabulut, “Manufacturing and testing of a gamma type Stirling engine,” Renew. Energ., vol. 30, pp. 57–66, 2005.
- B. Kongtragool and S. Wongwises, “Performance of low-temperature differential Stirling engines,” Renew. Energ., vol. 32, no. 4, pp. 547–566, 2007.
- B. Kongtragool and S. Wongwises, “Performance of a twin power piston low temperature differential Stirling engine powered by a solar simulator,” Sol. Energ., vol. 81, no. 7, pp. 884–895, 2007.
- B. Kongtragool and S. Wongwises, “A four power-piston low-temperature differential Stirling engine using simulated solar energy as a heat source,” Sol. Energ., vol. 82, no. 6, pp. 493–500, 2008.
- W.-L. Chen, K.-L. Wong, and Y.-F. Chang, “A computational fluid dynamics study on the heat transfer characteristics of the working cycle of a low-temperature-differential gamma-type Stirling engine,” Int. J. Heat Mass Transf., vol. 75, pp. 145–155, 2014.
- C.-H. Cheng and Y.-F. Chen, “Numerical simulation of thermal and flow fields inside a 1-kW beta-type Stirling engine,” Appl. Therm. Eng., vol. 121, pp. 554–561, 2017.vol
- W. R. Martini, Stirling Engine Design Manual, 2nd ed. Washington, DC: US Department of Energy, Conservation and Renewable Energy, Office of Vehicle and Engine R&D, 1983.
- M. Hooshang, R. A. Moghadam, and S. AlizadehNia, “Dynamic response simulation and experiment for gamma-type Stirling engine,” Renew. Energ., vol. 86, pp. 192–205, 2016.
- S. Alfarawi, R. Al-Dadah, and S. Mahmoud, “Enhanced thermodynamic modelling of a gamma-type Stirling engine,” Appl. Therm. Eng., vol. 106, pp. 1380–1390, 2016.
- M. T. Mabrouk, A. Kheiri, and M. Feidt, “Displacer gap losses in beta and gamma Stirling engines,” Energy, vol. 72, pp. 135–144, 2014.
- R. Li, L. Grosu, and D. Queiros-Condé, “Losses effect on the performance of a gamma type Stirling engine,” Energ. Conver. Manag., vol. 114, pp. 28–37, 2016.
- R. Li, L. Grosu, and W. Li, “New polytropic model to predict the performance of beta and gamma type Stirling engine,” Energy, vol. 128, pp. 62–76, 2017.
- S. Alfarawi, R. Al-Dadah, and S. Mahmoud, “Influence of phase angle and dead volume on gamma-type Stirling engine power using CFD simulation,” Energ. Conver. Manag., vol. 124, pp. 130–140, 2016.
- S. Iwamoto, F. Toda, K. Hirata, M. Takeuchi, and T. Yamamoto, "Comparison of low-and high-temperature differential Stirling engines.", Proceedings of 8th International Stirling engine conference, pp. 29–38. 1997.
- F. Toda, S. Iwamoto, and M. Takeuchi, “Development of low-temperature difference Stirling engine”, Proceedings of the 6th ISME, Tokyo, 2000.
- M.Boles and Y.Cengel, Thermodynamics: An Engineering Approach, 4th ed. Boston: McGraw-Hill, 2002.
- G. Soave, “Equilibrium constants from a modified Redlich-Kwong equation of state,” Chem. Eng. Sci., vol. 27, no. 6, pp. 1197–1203, 1972.
- H.-D. Kuehl, "Numerically efficient modelling of non-ideal gases and their transport properties in Stirling cycle simulation," Proceedings of 17th International Stirling Engine Conference and Exhibition, pp. 572–579, August 24-26, 2016, Newcastle upon Tyne, UK.
- J. J. Valencia and P. Quested, “Thermophysical properties,” Model. Cast. Solidif. Process., vol. 15, pp. 468–481, 2001.
- A. Boroujerdi and M. Esmaeili, “Characterization of the frictional losses and heat transfer of oscillatory viscous flow through wire-mesh regenerators,” Alexandria Eng. J., vol. 54, no. 4, pp. 787–794, 2015.