Effect of droplet characteristics on heat transfer of mist/air cooling in a pin-finned channel

References

• D. E. Metzger, R. A. Berry, and J. P. Bronson, “Developing heat transfer in rectangular ducts with staggered arrays of short pin fins,” J. Heat Transfer, vol. 104, no. 4, pp. 700–706, 1982. DOI: 10.1115/1.3245188.
   Web of Science ®Google Scholar
• J. Armstrong, and D. Winstanley, “A review of staggered array pin fin heat transfer for turbine cooling applications,” J. Turbomach., vol. 110, no. 1, pp. 94–103, 1988. DOI: 10.1115/1.3262173.
   Web of Science ®Google Scholar
• R. Matsumoto, S. Kikkawa, and M. Senda, “Effect of pin fin arrangement on endwall heat transfer,” JSME Int. J. Ser. B Fluids Thermal Eng., vol. 40, no. 1, pp. 142–151, 1997. DOI: 10.1299/jsmeb.40.142.
   Web of Science ®Google Scholar
• M. Tahat, Z. H. Kodah, B. A. Jarrah, and S. D. Probert, “Heat transfers from pin-fin arrays experiencing forced convection,” Appl. Energy, vol. 67, no. 4, pp. 419–442, 2000. DOI: 10.1016/S0306-2619(00)00032-5.
   Web of Science ®Google Scholar
• T. Horbach, A. Schulz, and H. J. Bauer, “Trailing edge film cooling of gas turbine airfoils—external cooling performance of various internal pin fin configurations,” J. Turbomach., vol. 133, no. 4, pp. 041006, 2011. DOI: 10.1115/1.4002964.
   Web of Science ®Google Scholar
• M. K. Chyu, C. H. Yen, and S. Siw, Comparison of Heat Transfer from Staggered Pin Fin Arrays with Circular, Cubic and Diamond Shaped Elements, ASME Paper, GT2007-28306, 2007.
   Google Scholar
• S. C. Siw, M. K. Chyu, and M. A. Alvin, Heat transfer enhancement of internal cooling passage with triangular and semi-circular shaped pin-fin arrays, ASME Paper, No. GT2012, vol. 69266, 2012.
   Google Scholar
• M. A. Moon, and K. Y. Kim, Heat transfer performance of a new fan-shaped pin-fin in internal cooling channel, ASME Paper, No. GT2013-94193, 2013.
   Google Scholar
• R. J. Goldstein, and S. B. Chen, “Flow and mass transfer performance in short Pin-Fin channels with different fin shapes,” Int. J. Rotat. Mach., vol. 4, no. 2, pp. 113–128, 1998. DOI: 10.1155/S1023621X98000104.
   Google Scholar
• J. Krueckels, S. Naik, A. Lerch, and A. Sedlov, Heat transfer in a vane tailing edge passage with conical pins and pin-turbulator integrated configurations, ASME Paper, No. GT2014-25522, 2014.
   Google Scholar
• S. C. Arora, and W. Abdel-Messeh, Characteristics of partial length circular pin fins as heat transfer augmentators for airfoil internal cooling passages, ASME Paper, No. 89-GT-87, 1989.
   Google Scholar
• S. C. Siw, M. K. Chyu, and M. A. Alvin, Effects of pin detached space on heat transfer and pin-fin arrays, ASME Paper, No. GT2010-23227, 2010.
   Google Scholar
• S. C. Siw, Chyu, M. K. Chyu, and M. A. Alvin, Effects of pin detached space on heat transfer in a rib-roughened channel, ASME Paper, No. GT2011-46078, 2011.
   Google Scholar
• J. C. Corman, H Gas turbine combined cycle technology and development status, ASME Paper, No. 96-GT-011, 1996.
   Google Scholar
• L. Shui, J. Gao, X. Shi, and J. Liu, “Effect of duct aspect ratio on heat transfer and friction in steam-cooled ducts with 60 angled rib turbulators,” Exp. Thermal Fluid Sci., vol. 49, pp. 123–134, 2013. DOI: 10.1016/j.expthermflusci.2013.04.010.
   Web of Science ®Google Scholar
• J. Liu, J. Gao, and T. Gao, An experimental investigation of heat transfer characteristics in a steam cooled square channel with rib turbulators, ASME paper, No. GT2011-46134, 2011.
   Google Scholar
• J. Liu, J. Gao, T. Gao, and X. Shi, “Heat transfer characteristics in Steam-Cooled rectangular channels with two opposite rib-roughened walls,” Appl. Thermal Eng., vol. 50, no. 1, pp. 104–111, 2013. DOI: 10.1016/j.applthermaleng.2012.05.003.
   Web of Science ®Google Scholar
• T. Wang, J. L. Gaddis, and X. Li, “Mist/steam heat transfer of multiple rows of impinging jets,” Int. J. Heat Mass Transfer, vol. 48, no. 25-26, pp. 5179–5191, 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.07.016.
   Web of Science ®Google Scholar
• T. Gao, J. Zeng, J. Li, and J. Gong, “Effect of aspect ratio on the flow and heat transfer characteristics of mist/steam in rectangular ribbed channels,” Num. Heat Transfer A Appl., vol. 70, no. 6, pp. 895–909, 2017.
   Google Scholar
• T. Wang, and X. Li, “Mist film cooling simulation at gas turbine operating conditions,” Int. J. Heat Mass Transfer, vol. 51, no. 21-22, pp. 5305–5317, 2008. DOI: 10.1016/j.ijheatmasstransfer.2008.04.040.
   Web of Science ®Google Scholar
• T. S. Dhanasekaran, and T. Wang, “Simulation of mist film cooling on rotating gas turbine blades,” ASME J. Heat Transfer, vol. 134, no. 1, pp. 011501, 2012. DOI: 10.1115/1.4004480.
   Web of Science ®Google Scholar
• L. Zhao, and T. Wang, “An experimental study of mist/air film cooling on a flat plate with application to gas turbine airfoils—part I: Heat transfer,” J. Turbomach., vol. 136, no. 7, pp. 071006, 2014. DOI: 10.1115/1.4025736.
   Web of Science ®Google Scholar
• L. Zhao, and T. Wang, “An experimental study of mist/air film cooling on a flat plate with application to gas turbine airfoils—part II: Two-phase flow measurements and droplet dynamics,” J. Turbomach., vol. 136, no. 7, pp. 071007, 2014. DOI: 10.1115/1.4025738.
   Web of Science ®Google Scholar
• J. Zhou, X. Wang, J. Li, and H. Lu, “CFD analysis of mist/air film cooling on a flat plate with different hole types,” Num. Heat Transfer A Appl., vol. 71, no. 11, pp. 1123–1140, 2017. DOI: 10.1080/10407782.2017.1337994.
   Web of Science ®Google Scholar
• J. Wang, Q. Li, B. Sunden, J. Baleta, and M. Vujanovic, “Two-phase flow simulation of mist film cooling with deposition for various boundary conditions,” Num. Heat Transfer A Appl., vol. 71, no. 9, pp. 895–909, 2017. DOI: 10.1080/10407782.2017.1326790.
   Web of Science ®Google Scholar
• X. Wang, F. Zhang, D. Zheng, and J. Li, “Effect of droplet characteristics and rotation speed on the flow and heat transfer characteristics of mist/air cooling in a rotating ribbed two-pass rectangular channel,” J. Power Energy, vol. 231, no. 2, pp. 119–132, 2017. DOI: 10.1177/0957650916680933.
   Web of Science ®Google Scholar
• L. Ye, Z. Liu, C. Gao, X. Yang, and Z. Feng, Numerical study on heat transfer performance of a new-proposed pin-fin in an internal channel, ASME Paper, No. GT2017-64573, 2017.
   Google Scholar
• P. J. Roache, “Perspective: a method for uniform reporting of grid refinement studies, ASME,” J. Fluids Eng., vol. 116, no. 3, pp. 405–413, 1994. DOI: 10.1115/1.2910291.
   Web of Science ®Google Scholar
• X. Li, J. L. Gaddis, and T. Wang, “Modeling of heat transfer in a mist/steam impinging jet,” ASME J. Heat Transfer, vol. 124, no. 6, pp. 1086–1092, 2001. DOI: 10.1115/1.1409262.
   Google Scholar