Numerical study of mixed convection in a ventilated square enclosure with the lattice Boltzmann method

References

• R. Mandel, A. Shooshtari, and M. Ohadi, “Effect of manifold flow configuration on two-phase ultra-high flux cooling,” Numerical Heat Transfer, Part A: Applications, vol. 74, no. 8, pp. 1425–1442, 2018. DOI: 10.1080/10407782.2018.1538297.
   Web of Science ®Google Scholar
• X. Zhai, Y. Xu, and Z. Yu, “Numerical analysis on the evolution of CO concentration in return corner: a case study of steady U-type ventilation working face,” Numerical Heat Transfer, Part A: Applications, vol. 74, no. 11, pp. 1732–1746, 2018. DOI: 10.1080/10407782.2018.1538294.
   Web of Science ®Google Scholar
• W. Baines, and J. Turner, “Turbulent buoyant convection from a source in a confined region,” Journal of Fluid Mechanics, vol. 37, no. 1, pp. 51–80, 1969. DOI: 10.1017/S0022112069000413.
   Web of Science ®Google Scholar
• A. W. Woods, C. Caulfield, and J. C. Phillips, “Blocked natural ventilation: the effect of a source mass flux,” Journal of Fluid Mechanics, vol. 495, pp. 119–133, 2003. DOI: 10.1017/S0022112003005627.
   Web of Science ®Google Scholar
• P. Paranthoën, and M. Gonzalez, “Mixed convection in a ventilated enclosure,” International Journal of Heat and Fluid Flow, vol. 31, no. 2, pp. 172–178, 2010. DOI: 10.1016/j.ijheatfluidflow.2010.01.006.
   Web of Science ®Google Scholar
• A. Ngondiep, M. Gonzalez, B. Patte-Rouland, and P. Paranthoën, “Flows produced by a forced plume in a ventilated enclosure,” Journal of Physics: Conference Series, vol. 395, no. 1, pp. 012097, 2012. IOP Publishing. DOI: 10.1088/1742-6596/395/1/012097.
   Google Scholar
• J. Lage, A. Bejan, and R. Anderson, “Efficiency of transient contaminant removal from a slot ventilated enclosure,” International Journal of Heat and Mass Transfer, vol. 34, no. 10, pp. 2603–2615, 1991. DOI: 10.1016/0017-9310(91)90100-S.
   Web of Science ®Google Scholar
• J. Lage, A. Bejan, and R. Anderson, “Removal of contaminant generated by a discrete source in a slot ventilated enclosure,” International Journal of Heat and Mass Transfer, vol. 35, no. 5, pp. 1169–1180, 1992. DOI: 10.1016/0017-9310(92)90177-T.
   Web of Science ®Google Scholar
• H. Yu, “Trajectory of a horizontally diffused plane wall jet in a non-isothermal ceiling slot-ventilated enclosure,” Biosystems Engineering, vol. 91, no. 1, pp. 99–109, 2005. DOI: 10.1016/j.biosystemseng.2005.02.012.
   Web of Science ®Google Scholar
• D. W. Etheridge, and M. Sandberg, Building Ventilation: Theory and Measurement. Chichester, UK: John Wiley & Sons, 1996.
   Google Scholar
• E. Papanicolaou, and Y. Jaluria, “Transition to a periodic regime in mixed convection in a square cavity,” Journal of Fluid Mechanics, vol. 239, no. 1, pp. 489–509, 1992. DOI: 10.1017/S0022112092004506.
   Google Scholar
• E. Papanicolaou, and Y. Jaluria, “Computation of turbulent flow in mixed convection in a cavity with a localized heat source,” Journal of Heat Transfer, vol. 117, no. 3, pp. 649–658, 1995. DOI: 10.1115/1.2822626.
   Web of Science ®Google Scholar
• T. Hsu, and S. Wang, “Mixed convection in a rectangular enclosure with discrete heat sources,” Numerical Heat Transfer. Part A, Applications, vol. 38, no. 6, pp. 627–652, 2000.
   Web of Science ®Google Scholar
• A. Omri, and S. B. Nasrallah, “Control volume finite element numerical simulation of mixed convection in an air-cooled cavity,” Numerical Heat Transfer, Part A: Applications, vol. 36, no. 6, pp. 615–637, 1999.
   Web of Science ®Google Scholar
• S. Singh, and M. Sharif, “Mixed convective cooling of a rectangular cavity with inlet and exit openings on differentially heated side walls,” Numerical Heat Transfer, Part A: Applications, vol. 44, no. 3, pp. 233–253, 2003. DOI: 10.1080/716100509.
   Web of Science ®Google Scholar
• N. O. Moraga, and S. E. Lopez, “Numerical simulation of three-dimensional mixed convection in an air-cooled cavity,” Numerical Heat Transfer, Part A: Applications, vol. 45, no. 8, pp. 811–824, 2004. DOI: 10.1080/10407780490250409.
   Web of Science ®Google Scholar
• A. Raji, M. Hasnaoui, and A. Bahlaoui, “Numerical study of natural convection dominated heat transfer in a ventilated cavity: Case of forced flow playing simultaneous assisting and opposing roles,” International Journal of Heat and Fluid Flow, vol. 29, no. 4, pp. 1174–1181, 2008. DOI: 10.1016/j.ijheatfluidflow.2008.01.010.
   Web of Science ®Google Scholar
• S. Saha, M. A. Mamun, M. Z. Hossein, and A. S. Islam, “Mixed convection in an enclosure with different inlet and exit configurations,” Journal of Applied Fluid Mechanics, vol. 1 no. 1, pp. 78–93, 2008.
   Google Scholar
• N. A. Muñoz, J. F. Palafox, and K. Kohlhof, Numerical Study of Heat Transfer by Free and Forced Convection in a Ventilated Cavity. In Sustainability in Energy and Buildings. Berlin, Heidelberg: Springer, 2011, pp. 91–99.
   Google Scholar
• F. Selimefendigil, and H. F. Öztop, “Numerical investigation and dynamical analysis of mixed convection in a vented cavity with pulsating flow,” Computers & Fluids, vol. 91, pp. 57–67, 2014. DOI: 10.1016/j.compfluid.2013.11.033.
   Web of Science ®Google Scholar
• I. Hernández-López, J. Xamán, G. Álvarez, Y. Chávez, and J. Arce, “Analysis of laminar and turbulent natural, mixed and forced convection in cavities by heatlines,” Archives of Mechanics, vol. 68, no. 1, pp. 27–53, 2016.
   Web of Science ®Google Scholar
• L. Zhang, Y. Huang, G. Yang, and J. Wu, “Numerical simulation of conjugate turbulent mixed convection in an open cavity: evaluation of different wall heat conduction models,” Numerical Heat Transfer, Part A: Applications, vol. 74, no. 5, pp. 1244–1264, 2018. DOI: 10.1080/10407782.2018.1517554.
   Web of Science ®Google Scholar
• B. B. Beya, and T. Lili, “Oscillatory double-diffusive mixed convection in a two-dimensional ventilated enclosure,” International Journal of Heat and Mass Transfer, vol. 50, no. 23/24, pp. 4540–4553, 2007./11/01/2007. DOI: 10.1016/j.ijheatmasstransfer.2007.03.027.
   Web of Science ®Google Scholar
• E. Bilgen, and A. Muftuoglu, “Cooling strategy by mixed convection of a discrete heater at its optimum position in a square cavity with ventilation ports,” International Communications in Heat and Mass Transfer, vol. 35, no. 5, pp. 545–550, 2008. DOI: 10.1016/j.icheatmasstransfer.2008.01.001.
   Web of Science ®Google Scholar
• A. A. Mehrizi, M. Farhadi, H. H. Afroozi, K. Sedighi, and A. R. Darz, “Mixed convection heat transfer in a ventilated cavity with hot obstacle: effect of nanofluid and outlet port location,” International Communications in Heat and Mass Transfer, vol. 39, no. 7, pp. 1000–1008, 2012. DOI: 10.1016/j.icheatmasstransfer.2012.04.002.
   Web of Science ®Google Scholar
• N. Biswas, P. S. Mahapatra, and N. K. Manna, Mixed Convection in a Ventilated Enclosure with Different Heater Position. In Fluid Mechanics and Fluid Power–Contemporary Research. New Delhi: Springer, 2017, pp. 363–374.
   Google Scholar
• X. Zhao, W. Liu, S. Liu, Y. Zou, and Q. Chen, “Inverse design of an indoor environment using a CFD-based adjoint method with the adaptive step size for adjusting the design parameters,” Numerical Heat Transfer, Part A: Applications, vol. 71, no. 7, pp. 707–720, 2017. DOI: 10.1080/10407782.2017.1308720.
   Web of Science ®Google Scholar
• R. Abhinav, et al., “Numerical study on effect of vent locations on natural convection in an enclosure with an internal heat source,” International Communications in Heat and Mass Transfer, vol. 49, pp. 69–77, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.09.001.
   Web of Science ®Google Scholar
• H. Xu, R. Xiao, F. Karimi, M. Yang, and Y. Zhang, “Numerical study of double diffusive mixed convection around a heated cylinder in an enclosure,” International Journal of Thermal Sciences, vol. 78, pp. 169–181, 2014. DOI: 10.1016/j.ijthermalsci.2013.12.016.
   Web of Science ®Google Scholar
• S. K. Gupta, D. Chatterjee, and B. Mondal, “Investigation of mixed convection in a ventilated cavity in the presence of a heat conducting circular cylinder,” Numerical Heat Transfer, Part A: Applications, vol. 67, no. 1, pp. 52–74, 2015. DOI: 10.1080/10407782.2014.916113.
   Web of Science ®Google Scholar
• F. Karimi, H. Xu, Z. Wang, M. Yang, and Y. Zhang, “Numerical simulation of steady mixed convection around two heated circular cylinders in a square enclosure,” Heat Transfer Engineering, vol. 37, no. 1, pp. 64–75, 2016. DOI: 10.1080/01457632.2015.1042343.
   Web of Science ®Google Scholar
• W. Liu, M. Jin, C. Chen, R. You, and Q. Chen, “Implementation of a fast fluid dynamics model in OpenFOAM for simulating indoor airflow,” Numerical Heat Transfer, Part A: Applications, vol. 69, no. 7, pp. 748–762, 2016. DOI: 10.1080/10407782.2015.1090780.
   Web of Science ®Google Scholar
• D. D'Humieres, “Generalized lattice-Boltzmann equations,” Rarefied Gas Dynamics, vol. 159, pp. 450–458, 1992.
   Google Scholar
• P. L. Bhatnagar, E. P. Gross, and M. Krook, “A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems,” Physical Review, vol. 94, no. 3, pp. 511, 1954. DOI: 10.1103/PhysRev.94.511.
   Web of Science ®Google Scholar
• P. Lallemand, and L.-S. Luo, “Theory of the lattice Boltzmann method: dispersion, dissipation, isotropy, Galilean invariance, and stability,” Physical Review E, vol. 61, no. 6, pp. 6546, 2000. DOI: 10.1103/PhysRevE.61.6546.
   PubMed Web of Science ®Google Scholar
• A. Mezrhab, M. h Bouzidi, and P. Lallemand, “Hybrid lattice-Boltzmann finite-difference simulation of convective flows,” Computers & Fluids, vol. 33, no. 4, pp. 623–641, 2004. DOI: 10.1016/j.compfluid.2003.05.001.
   Web of Science ®Google Scholar
• M. Jami, A. Mezrhab, M. h Bouzidi, and P. Lallemand, “Lattice-Boltzmann computation of natural convection in a partitioned enclosure with inclined partitions attached to its hot wall,” Physica A: Statistical Mechanics and Its Applications, vol. 368, no. 2, pp. 481–494, 2006. DOI: 10.1016/j.physa.2005.12.029.
   Web of Science ®Google Scholar
• M. M. Tekitek, M. Bouzidi, F. Dubois, and P. Lallemand, “Adjoint lattice Boltzmann equation for parameter identification,” Computers & Fluids, vol. 35, no. 8/9, pp. 805–813, 2006. DOI: 10.1016/j.compfluid.2005.07.015.
   Web of Science ®Google Scholar
• M. A. Moussaoui, M. Jami, A. Mezrhab, and H. Naji, “Lattice Boltzmann simulation of convective heat transfer from heated blocks in a horizontal channel,” Numerical Heat Transfer, Part A: Applications, vol. 56, no. 5, pp. 422–443, 2009. DOI: 10.1080/10407780903244338.
   Web of Science ®Google Scholar
• Y. Guo, R. Bennacer, S. Shen, D. Ameziani, and M. Bouzidi, “Simulation of mixed convection in slender rectangular cavity with lattice Boltzmann method,” International Journal of Numerical Methods for Heat & Fluid Flow, vol. 20, no. 1, pp. 130–148, 2010. DOI: 10.1108/09615531011008163.
   Web of Science ®Google Scholar
• P. Shankar, and M. Deshpande, “Fluid mechanics in the driven cavity,” Annual Review of Fluid Mechanics, vol. 32, no. 1, pp. 93–136, 2000. DOI: 10.1146/annurev.fluid.32.1.93.
   Web of Science ®Google Scholar
• A. A. Mohamad, Lattice Boltzmann Method: fundamentals and Engineering Applications with Computer Codes. London: Springer Science & Business Media, 2011.
   Google Scholar
• R. Du, and W. Liu, “A new multiple-relaxation-time lattice Boltzmann method for natural convection,” Journal of Scientific Computing, vol. 56, no. 1, pp. 122–130, 2013. DOI: 10.1007/s10915-012-9665-9.
   Web of Science ®Google Scholar
• J. Zhao, W. Cai, and Y. Jiang, “Estimation of computational grid for thermal convection simulation with lattice Boltzmann method,” Numerical Heat Transfer, Part B: Fundamentals, vol. 73, no. 3, pp. 155–168, 2018. DOI: 10.1080/10407790.2018.1446624.
   Web of Science ®Google Scholar
• N. C. Markatos, and K. Pericleous, “Laminar and turbulent natural convection in an enclosed cavity,” International Journal of Heat and Mass Transfer, vol. 27, no. 5, pp. 755–772, 1984. DOI: 10.1016/0017-9310(84)90145-5.
   Web of Science ®Google Scholar
• H. Ambarita, et al., “Laminar natural convection heat transfer in an air filled square cavity with two insulated baffles attached to its horizontal walls,” Thermal Science and Engineering, vol. 14, no. 3, pp. 35–46, 2006.
   Google Scholar