References
- S. Khandekar, N. Dollinger, and M. Groll, “Understanding operational regimes of closed loop pulsating heat pipes: An experimental study,” Appl. Therm. Eng., vol. 23, no. 6, pp. 707–719, 2003. DOI: 10.1016/S1359-4311(02)00237-5.
- P. Charoensawan, S. Khandekar, M. Groll, and P. Terdtoon, “Closed loop pulsating heat pipes part A: Parametric experimental investigations,” Appl. Therm. Eng., vol. 23, no. 16, pp. 2009–2020, 2003. DOI: 10.1016/S1359-4311(03)00159-5.
- S. Wang and S. Nishio, “Study on miniature oscillating heat pipes,” J. Enhanced Heat Transf., vol. 14, no. 2, pp. 175–187, 2007. DOI: 10.1615/JEnhHeatTransf.v14.i2.70.
- P. Charoensawan and P. Terdtoon, “Thermal performance of horizontal closed-loop oscillating heat pipes,” Appl. Therm. Eng., vol. 28, no. 5–6, pp. 460–466, 2008. DOI: 10.1016/j.applthermaleng.2007.05.007.
- M. B. Shafii, S. Arabnejad, Y. Saboohi, and H. Jamshidi, “Experimental investigation of pulsating heat pipes and a proposed correlation,” Heat Transf. Eng., vol. 31, no. 10, pp. 854–861, 2010. DOI: 10.1080/01457630903547636.
- C. Y. Tseng, K. S. Yang, K. H. Chien, M. S. Jeng, and C. C. Wang, “Investigation of the performance of pulsating heat pipe subject to uniform/alternating tube diameters,” Exp. Therm. Fluid Sci., vol. 54, pp. 85–92, 2014. DOI: 10.1016/j.expthermflusci.2014.01.019.
- M. L. Rahman, S. Nawrin, R. A. Sultan, F. Mir, and M. Ali, “Effect of fin and insert on the performance characteristics of close loop pulsating heat pipe (CLPHP),” Procedia Eng., vol. 105, pp. 129–136, 2015. DOI: 10.1016/j.proeng.2015.05.020.
- D. Bastakoti, H. Zhang, W. Cai, and F. Li, “An experimental investigation of thermal performance of pulsating heat pipe with alcohols and surfactant solutions,” Int. J. Heat Mass Transf., vol. 117, pp. 1032–1040, 2018. DOI: 10.1016/j.ijheatmasstransfer.2017.10.075.
- D. A. Baitule and P. R. Pachghare, “Experimental analysis of closed loop pulsating heat pipe with variable filling ratio,” Int. J. Mech. Eng. Robotics Res., vol. 2, no. 3, pp. 113–121, 2013.
- P. R. Pachghare and A. M. Mahalle, “Thermo-hydrodynamics of closed loop pulsating heat pipe: An experimental study,” J. Mech. Sci. Technol., vol. 28, no. 8, pp. 3387–3394, 2014. DOI: 10.1007/s12206-014-0751-9.
- H. B. Ma et al., “Effect of nanofluid on the heat transport capability in an oscillating heat pipe,” Appl. Phys. Lett., vol. 88, no. 14, pp. 143116, 2006. DOI: 10.1063/1.2192971.
- S. Wang, Z. Lin, W. Zhang, and J. Chen, “Experimental study on pulsating heat pipe with functional thermal fluids,” Int. J. Heat Mass Transf., vol. 52, no. 21–22, pp. 5276–5279, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.04.033.
- R. R. Riehl and N. D. Santos, “Water-copper nanofluid application in an open loop pulsating heat pipe,” Appl. Therm. Eng., vol. 42, pp. 6–10, 2012. DOI: 10.1016/j.applthermaleng.2011.01.017.
- K. Jahani, M. Mohammadi, M. B. Shafii, and Z. Shiee, “Promising technology for electronic cooling: Nanofluidic micro pulsating heat pipes,” J. Electron. Packag., vol. 135, no. 2, pp. 021005, 2013. DOI: 10.1115/1.4023847.
- V. K. Karthikeyan, K. Ramachandran, B. C. Pillai, and A. B. Solomon, “Effect of nanofluids on thermal performance of closed loop pulsating heat pipe,” Exp. Therm. Fluid Sci., vol. 54, pp. 171–178, 2014. DOI: 10.1016/j.expthermflusci.2014.02.007.
- M. Mohammadi, M. Mohammadi, and M. B. Shafii, “Experimental inverstigation of a pulsating heat pipe using ferrofluid (magnetic nanofluid),” Trans. ASME J. Heat Transf., vol. 134, no. 1, pp. 014504, 2012. DOI: 10.1115/1.4004805.
- M. Mohammadi, M. Mohammadi, A. R. Ghahremani, M. B. Shafii, and N. Mohammadi, “Experimental investigation of thermal resistance of a ferrofluidic closed-loop pulsating heat pipe,” Heat Transf. Eng., vol. 35, no. 1, pp. 25–33, 2014. DOI: 10.1080/01457632.2013.810086.
- Y. Hu, T. Liu, X. Li, and S. Wang, “Heat transfer enhancement of micro oscillating heat pipes with self-rewetting fluid,” Int. J. Heat Mass Transf., vol. 70, pp. 496–503, 2014. DOI: 10.1016/j.ijheatmasstransfer.2013.11.031.
- A. Cecere et al., “Experimental analysis of a flat plate pulsating heat pipe with self-rewetting fluids during a parabolic flight campaign,” Acta Astronaut. (U.K.), vol. 147, pp. 454–461, 2018. DOI: 10.1016/j.actaastro.2018.03.045.
- X. H. Wang, H. C. Zheng, M. Q. Si, X. H. Han, and G. M. Chen, “Experimental investigation of the influence of surfactant on the heat transfer performance of pulsating heat pipe,” Int. J. Heat Mass Transf., vol. 83, pp. 586–590, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.12.010.
- M. Mameli, M. Marengo, and S. Khandekar, “Local heat transfer measurement and thermos-fluid characterization of a pulsating heat pipe,” Int. J. Therm. Sci., vol. 75, pp. 140–152, 2014. DOI: 10.1016/j.ijthermalsci.2013.07.025.
- G. H. Kwon and S. J. Kim, “Operational characteristics of pulsating heat pipes with a dual-diameter tube,” Int. J. Heat Mass Transf., vol. 75, pp. 184–195, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.03.032.
- G. H. Kwon and S. J. Kim, “Experimental investigation on the thermal performance of a micro pulsating heat pipe with a dual-diameter channel,” Int. J. Heat Mass Transf., vol. 89, pp. 817–828, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.091.
- S. Jun and S. J. Kim, “Comparison of the thermal performances and flow characteristics between closed-loop and closed-end micro pulsating heat pipes,” Int. J. Heat Mass Transf., vol. 95, pp. 890–901, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.12.064.
- H. Yang, S. Khandekar, and M. Groll, “Operational limit of closed loop pulsating heat pipes,” appl. Therm. Eng., vol. 28, no. 1, pp. 49–59, 2008. DOI: 10.1016/j.applthermaleng.2007.01.033.
- M. Ebrahimi, M. B. Shafii, and M. A. Bikarchi, “Experimental investigation of the thermal management of flat-plate closed-loop pulsating haet pipes with interconnecting channels,” Appl. Therm. Eng., vol. 90, pp. 838–847, 2015. DOI: 10.1016/j.applthermaleng.2015.07.040.
- M. Mameli, M. Marengo, and S. Zinna, “Numerical model of a multi-turn closed loop pulsating heat pipe: Effects of the local pressure losses due to meanderings,” Int. J. Heat Mass Transf., vol. 55, no. 4, pp. 1036–1047, 2012. DOI: 10.1016/j.ijheatmasstransfer.2011.10.006.
- Z. Lin, S. Wang, J. Chen, J. Huo, Y. Hu, and W. Zhang, “Experimental study on effective range of miniature oscillating heat pipes,” Appl. Therm. Eng., vol. 31, no. 5, pp. 880–886, 2011. DOI: 10.1016/j.applthermaleng.2010.11.009.
- J. Wang, H. Ma, and Q. Zhu, “Effects of the evaporator and condenser length on the performance of pulsating heat pipes,” Appl. Therm. Eng., vol. 91, pp. 1018–1025, 2015. DOI: 10.1016/j.applthermaleng.2015.08.106.
- K. S. Yang, Y. C. Cheng, M. C. Liu, and J. C. Shyu, “Micro pulsating heat pipes with alternate microchannel widths,” Appl. Therm. Eng., vol. 83, pp. 131–138, 2015. DOI: 10.1016/j.applthermaleng.2015.03.020.
- E. Jiaqiang, X. Zhao, H. Liu, J. Chen, W. Zuo, and Q. Peng, “Field synergy analysis for enhancing heat transfer capability of a novel narrow-tube close oscillating heat pipe,” Appl. Energy, vol. 175, pp. 218–228, 2016. DOI: 10.1016/j.apenergy.2016.05.028.
- W. Kim and S. J. Kim, “Effect of reentrant cavities on the thermal performance of a pulsating heat pipe,” Appl. Therm. Eng., vol. 133, pp. 61–69, 2018. DOI: 10.1016/j.applthermaleng.2018.01.027.
- D. Xu, T. Chen, and Y. Xuan, “Thermo-hydrodynamics analysis of vapor-liquid two-phase flow in the flat-plate pulsating heat pipe,” Int. Commun. Heat Mass Transf., vol. 39, no. 4, pp. 504–508, 2012. DOI: 10.1016/j.icheatmasstransfer.2012.02.002.
- Z. Lin, S. Wang, R. Shirakashi, and L. W. Zhange, “Simulation of a miniature oscillating heat pipe in bottom heating mode using CFD with unsteady modeling,” Int. J. Heat Mass Transf., vol. 57, no. 2, pp. 642–656, 2013. DOI: 10.1016/j.ijheatmasstransfer.2012.09.007.
- W. Jiansheng, W. Zhenchuan, and L. Meijun, “Thermal performance of pulsating heat pipes with different heating patterns,” Appl. Therm. Eng., vol. 64, no. 1–2, pp. 209–212, 2014. DOI: 10.1016/j.applthermaleng.2013.12.004.
- E. Jiaqiang, X. Zhao, Y. Deng, and H. Zhu, “Pressure distribution and flow characteristics of closed oscillating heat pipe during the starting process at different vacuum degrees,” Appl. Therm. Eng., vol. 93, pp. 166–173, 2016. DOI: 10.1016/j.applthermaleng.2015.09.060.
- S. M. Pouryoussefi and Y. Zhang, “Numerical investigation of chaotic flow in a 2D closed-loop pulsating heat pipe,” Appl. Therm. Eng., vol. 98, pp. 617–627, 2016. DOI: 10.1016/j.applthermaleng.2015.12.097.
- S. M. Pouryoussefi and Y. Zhang, “Nonlinear analysis of chaotic flow in a three-dimensional closed-loop pulsating heat pipe,” Trans. ASME J. Heat Transf., vol. 138, no. 12, pp. 122003, 2016.
- S. M. Pouryoussefi and Y. Zhang, “Analysis of chaotic flow in a 2D multi-turn closed-loop pulsating heat pipe,” Appl. Therm. Eng., vol. 126, pp. 1069–1076, 2017. DOI: 10.1016/j.applthermaleng.2017.01.097.
- Y. Li, F. Qi, H. Guo, Z. Guo, G. Xu, and J. Liu, “Numerical investigation of thermal runaway propagation in a Li-ion battery module using the heat pipe cooling system,” Numeric. Heat Transf. Part A: Appl., vol. 75, no. 3, pp. 183–199, 2019. DOI: 10.1080/10407782.2019.1580956.
- F. Dong, Z. Wang, T. Cao, and J. Ni, “A novel interphase mass transfer model toward the VOF simulation of subcooled flow boiling,” Numeric. Heat Transf. Part A: Appl., vol. 76, no. 4, pp. 220–231, 2019. DOI: 10.1080/10407782.2019.1627838.
- J. Haider, “Numerical modelling of evaporation and condensation phenomena,” Master Thesis, University of Stuttgart, Germany, 2013, pp. 8–13.
- S. C. K. D. Schepper, G. J. Heynderickx, and G. B. Marin, “Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker,” Comput. Chem. Eng., vol. 33, pp. 122–132, 2009. DOI: 10.1016/j.compchemeng.2008.07.013.
- K. Kafeel and A. Turan, “Axi-symmetric simulation of a two phase vertical thermosyphon using Eulerian two-fluid methodology,” Heat Mass Transf., vol. 49, no. 8, pp. 1089–1099, 2013. DOI: 10.1007/s00231-013-1155-6.
- C. J. Greenshields, OpenFOAM User Guide (version 5.0). England: OpenFOAM Foundation, 2017, pp. 93–94.