A numerical study of heat transfer effects and aerodynamic noise reduction in superheated steam flow passing a temperature and pressure regulation valve

References

• X. Han, Z. Han, W. Zeng, L. Peng, and J. Qian, “Numerical simulation of wet steam transonic condensation flow in the last stage of a steam turbine,” Int. J. Numer. Methods Heat Fluid, vol. 28, no. 10, pp. 2378–2403, 2018. DOI: 10.1108/HFF-10-2017-0415.
   Web of Science ®Google Scholar
• W. Adamczyk, P. Kozolub, G. Węcel, and A. Ryfa, “Simulations of the PC boiler equipped with complex swirling burners,” In.t J. Numer. Methods Heat Fluid, vol. 24, no. 4, pp. 845–860, 2014. DOI: 10.1108/HFF-02-2013-0067.
   Web of Science ®Google Scholar
• N. D. Pham et al., “Quality of plant-based food materials and its prediction during intermittent drying,” Crit. Rev. Food Sci. Nutr., vol. 59, no. 8, pp. 1197–1211, 2019. DOI: 10.1080/10408398.2017.1399103.
   PubMed Web of Science ®Google Scholar
• T. Väisänen, P. Kilpeläinen, V. Kitunen, R. Lappalainen, and L. Tomppo, “Effect of steam treatment on the chemical composition of hemp (Cannabis sativa L.) and identification of the extracted carbohydrates and other compounds,” Ind. Crops Prod., vol. 131, pp. 224–233, 2019. DOI: 10.1016/j.indcrop.2019.01.055.
   Web of Science ®Google Scholar
• J. Tao et al., “An experimental and numerical study of regulating performance and flow loss in a v-port ball valve,” J. Fluids Eng., vol. 142, no. 2, 2020. DOI: 10.1115/1.4044986.
   PubMed Web of Science ®Google Scholar
• J. Y. Qian et al., “Analysis of fouling in six-start spirally corrugated tubes,” Heat Transfer Eng., vol. 40, pp. 1–16, 2019. DOI: 10.1080/01457632.2019.1675246.
   Web of Science ®Google Scholar
• C. Yang et al., “Heat transfer study of a hybrid smooth and spirally corrugated tube,” Heat Transfer Eng., vol. 1–9, Dec. 2019. DOI: 10.1080/01457632.2019.1699292.
   Google Scholar
• J. Qian et al., “A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube,” Numer. Heat Transfer, Part A, vol. 73, no. 8, pp. 565–582, 2018. DOI: 10.1080/10407782.2018.1459381.
   Web of Science ®Google Scholar
• L. Luo et al., “Convergence angle and dimple shape effects on the heat transfer characteristics in a rotating dimple-pin fin wedge duct,” Numer. Heat Transfer, Part A, vol. 74, no. 10, pp. 1611–1635, 2018. DOI: 10.1080/10407782.2018.1543920.
   Web of Science ®Google Scholar
• S. Wang et al., “Heat transfer characteristics of a dimpled/protrusioned pin fin wedge duct with different converging angles for turbine blades,” Numer. Heat Transfer, Part A, vol. 76, no. 5, pp. 369–392, 2019. DOI: 10.1080/10407782.2019.1630235.
   Web of Science ®Google Scholar
• J. Y. Qian, Z. Wu, Q. K. Zhang, Z. J. Jin, and B. Sundén, “Heat transfer analysis on dimple geometries and arrangements in dimple jacketed heat exchanger,” HFF, vol. 29, no. 8, pp. 2775–2791, 2019. DOI: 10.1108/HFF-12-2018-0792.
   Web of Science ®Google Scholar
• Z. Cao, Z. Wu, H. Luan, and B. Sundén, “Numerical study on heat transfer enhancement for laminar flow in a tube with mesh conical frustum inserts,” Numer. Heat Transfer, Part A, vol. 72, no. 1, pp. 21–39, 2017. DOI: 10.1080/10407782.2017.1353386.
   Web of Science ®Google Scholar
• T. W. Kim and T. S. Park, “Size effect on compressible flow and heat transfer in microtube with rarefaction and viscous dissipation,” Numer. Heat Transfer, Part A, vol. 76, no. 11, pp. 871–888, 2019. DOI: 10.1080/10407782.2019.1673106.
   Web of Science ®Google Scholar
• Y. Wang, Y. Hu, Q. Huang, and Y. Cui, “Transient heat transfer study of direct contact condensation of steam in spray cooling water,” Trans. Tianjin Univ., vol. 24, no. 2, pp. 131–143, 2018. DOI: 10.1007/s12209-017-0106-6.
   Google Scholar
• A. `, W. Lerch, and R. Heimrath, “Heat pump condenser and desuperheater integrated into a storage tank: model development and comparison with measurements,” Appl. Therm. Eng., vol. 102, pp. 465–475, 2016. DOI: 10.1016/j.applthermaleng.2016.04.010.
   Web of Science ®Google Scholar
• E. Vahid and G. Mofid, “Two-dimensional modeling of water spray cooling in superheated steam,” Therm. Sci, vol. 12, no. 2, pp. 79–88, 2008.
   Web of Science ®Google Scholar
• R. Kouhikamali, H. Hesami, and A. Ghavamian, “Convective heat transfer in a mixture of cooling water and superheated steam,” Int. J. Therm. Sci., vol. 60, pp. 205–211, 2012. DOI: 10.1016/j.ijthermalsci.2012.05.012.
   Web of Science ®Google Scholar
• E. Rahimi, S. Torfeh, and R. Kouhikamali, “Numerical study of counter-current desuperheaters in thermal desalination units,” Desalination, vol. 397, pp. 140–150, 2016. DOI: 10.1016/j.desal.2016.06.028.
   Web of Science ®Google Scholar
• Z. J. Jin, C. Qiu, C. H. Jiang, J. Y. Wu, and J. Y. Qian, “Effect of valve core shapes on cavitation flow through a sleeve regulating valve,” J. Zhejiang Univ. Sci. A, vol. 21, no. 1, pp. 1–14, 2020. DOI: 10.1631/jzus.A1900528.
   Web of Science ®Google Scholar
• S. S. Rodrigues and A. C. Marta, “On addressing wind turbine noise with after-market shape blade add-ons,” Renew. Energy, vol. 140, pp. 602–614, 2019. DOI: 10.1016/j.renene.2019.03.056.
   Web of Science ®Google Scholar
• C. Xu, Y. Mao, and Z. Hu, “Control of cylinder wake flow and noise through a downstream porous treatment,” Aerosp. Sci. Technol., vol. 88, pp. 233–243, 2019. DOI: 10.1016/j.ast.2019.03.027.
   Web of Science ®Google Scholar
• J. Y. Qian, M. R. Chen, X. L. Liu, and Z. J. Jin, “A numerical investigation of the flow of nanofluids through a micro Tesla valve,” J. Zhejiang Univ. Sci. A, vol. 20, no. 1, pp. 50–60, 2019. DOI: 10.1631/jzus.A1800431.
   Web of Science ®Google Scholar
• J. Y. Qian, M. R. Chen, Z. X. Gao, and Z. J. Jin, “Mach number and energy loss analysis inside multi-stage Tesla valves for hydrogen decompression,” Energy, vol. 179, pp. 647–654, 2019. DOI: 10.1016/j.energy.2019.05.064.
   Web of Science ®Google Scholar
• L. Li, P. Liu, Y. Xing, and H. Guo, “experimental investigation on the noise reduction method of helical cables for a circular cylinder and tandem cylinders,” Appl. Acoust., vol. 152, pp. 79–87, 2019. DOI: 10.1016/j.apacoust.2019.03.027.
   Web of Science ®Google Scholar
• A. Bodling and A. Sharma, “Numerical investigation of noise reduction mechanisms in a bio-inspired airfoil,” J. Sound Vib., vol. 453, pp. 314–327, 2019. DOI: 10.1016/j.jsv.2019.02.004.
   Web of Science ®Google Scholar
• G. Romani and D. Casalino, “Rotorcraft blade-vortex interaction noise prediction using the Lattice-Boltzmann method,” Aerosp. Sci. Technol., vol. 88, pp. 147–157, 2019. DOI: 10.1016/j.ast.2019.03.029.
   Web of Science ®Google Scholar
• J. Y. Qian, C. W. Hou, J. Y. Wu, Z. X. Gao, and Z. J. Jin, “Aerodynamics analysis of superheated steam flow through multi-stage perforated plates,” Int. J. Heat Mass Transfer, vol. 141, pp. 48–57, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.06.061.
   Web of Science ®Google Scholar
• E. Talay and A. Altinisik, “The effect of door structural stiffness and flexural components to the interior wind noise at elevated vehicle speeds,” Appl. Acoust., vol. 148, pp. 86–96, 2019. DOI: 10.1016/j.apacoust.2018.12.005.
   Web of Science ®Google Scholar
• L. J. Ayton and P. Chaitanya, “An analytical and experimental investigation of aerofoil–turbulence interaction noise for plates with spanwise-varying leading edges,” J. Fluid Mech., vol. 865, pp. 137–168, 2019. DOI: 10.1017/jfm.2019.78.
   Web of Science ®Google Scholar
• C. P. Arroyo, T. Leonard, M. Sanjosé, S. Moreau, and F. Duchaine, “Large Eddy simulation of a scale-model turbofan for fan noise source diagnostic,” J. Sound Vib., vol. 445, pp. 64–76, 2019. DOI: 10.1016/j.jsv.2019.01.005.
   Web of Science ®Google Scholar
• M. Zhang and A. Frendi, “Effect of airfoil leading edge waviness on flow structures and noise,” Int. J. Numer. Methods Heat Fluid, vol. 26, no. 6, pp. 1821–1842, 2016. DOI: 10.1108/HFF-04-2015-0143.
   Web of Science ®Google Scholar
• A. Frendi and M. Brown, “Flow structures and noise from a supersonic impinging jet,” Int. J. Numer. Methods Heat Fluid, vol. 26, no. 8, pp. 2509–2527, 2016. DOI: 10.1108/HFF-05-2015-0174.
   Web of Science ®Google Scholar
• G. K. Batchelor, An Introduction to Fluid Dynamics, Cambridge, England: Cambridge University Press, 1967.
   Google Scholar
• I. Proudman, “The generation of noise by isotropic turbulence,” Proc. R. Soc. A, vol. 214, pp. 119–132, 1952.
   Google Scholar
• G. M. Lilley, “The radiated noise from isotropic turbulence revisited,” Theoret. Comput. Fluid Dyn., vol. 6, no. 5–6, pp. 281–301, 1994. DOI: 10.1007/BF00311842.
   Web of Science ®Google Scholar
• S. Sarkar and M. Y. Hussaini, “Computation of the sound generated by isotropic turbulence,” In NASA Contract Report, Hampton, VA: NASA Langley Research Center, 1993, pp. 93–74.
   Google Scholar