Heat and flow characteristics of V-shaped protrusion/concavity combined with miniature V-ribs

References

• J. C. Han, Y. M. Zhang and C. P. Lee, “Augmented heat transfer in square channels with parallel, crossed, and V-shaped angled ribs,” ASME. J. Heat Transfer, vol. 113, no. 3, pp. 590–596, 1991. DOI: 10.1115/1.2910606.
   Google Scholar
• J. C. Han and Y. M. Zhang, “High performance heat transfer ducts with parallel broken and V-shaped broken ribs,” Int. J. Heat Mass Transfer, vol. 35, no. 2, pp. 513–523, 1992. DOI: 10.1016/0017-9310(92)90286-2.
   Web of Science ®Google Scholar
• S. V. Ekkad and J. C. Han, “Detailed heat transfer distributions in two-pass square channels with rib turbulators,” Int. J. Heat Mass Transfer, vol. 40, no. 11, pp. 2525–2537, 1997. DOI: 10.1016/S0017-9310(96)00318-3.
   Web of Science ®Google Scholar
• X. Gao and B. Sunden, “Heat transfer and pressure drop measurements in rib-roughened rectangular ducts,” Exper. Thermal Fluid Sci., vol. 24, no. 1–2, pp. 25–34, 2001. DOI: 10.1016/S0894-1777(00)00054-6.
   Web of Science ®Google Scholar
• P. Promvonge, W. Changcharoen, S. Kwankaomeng and C. Thianpong, “Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs,” Int. Commun. Heat Mass Transfer, vol. 38, no. 10, pp. 1392–1399, 2011. DOI: 10.1016/j.icheatmasstransfer.2011.07.014.
   Web of Science ®Google Scholar
• P. Singh, B. V. Ravi and S. V. Ekkad, “Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct,” Int. J. Heat Mass Transfer, vol. 102, pp. 1245–1256, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.07.015.
   Web of Science ®Google Scholar
• B. V. Ravi, P. Singh and S. V. Ekkad, “Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels,” Int. J. Thermal Sci., vol. 112, pp. 31–43, 2017. DOI: 10.1016/j.ijthermalsci.2016.09.034.
   Web of Science ®Google Scholar
• S. Skullong, C. Thianpong and P. Promvonge, “Effects of rib size and arrangement on forced convective heat transfer in a solar air heater channel,” Heat Mass Transfer, vol. 51, no. 10, pp. 1475–1485, 2015. DOI: 10.1007/s00231-015-1515-5.
   Web of Science ®Google Scholar
• P. Singh, Y. Ji and S. V. Ekkad, “Experimental and numerical investigation of heat and fluid flow in a square duct featuring criss-cross rib patterns,” Appl. Thermal Eng., vol. 128, pp. 415–425, 2018. DOI: 10.1016/j.applthermaleng.2017.09.036.
   Web of Science ®Google Scholar
• P. Ligrani, “Heat transfer augmentation technologies for internal cooling of turbine components of gas turbine engines,” Int. J. Rotating Machinery, vol. 2013, pp. 1–32, 2013. DOI: 10.1155/2013/275653.
   Google Scholar
• G. I. Mahmood, M. L. Hill, D. L. Nelson, P. M. Ligrani, H. K. Moon and B. Glezer, “Local heat transfer and flow structure on and above a dimpled surface in a channel,” J. Turbomach, vol. 123, no. 1, pp. 115–123, 2001. DOI: 10.1115/1.1333694.
   Web of Science ®Google Scholar
• G. I. Mahmood and P. M. Ligrani, “Heat transfer in a dimpled channel: Combined influences of aspect ratio, temperature ratio, Reynolds number, and flow structure,” Int. J. Heat Mass Transfer, vol. 45, no. 10, pp. 2011–2020, 2002. DOI: 10.1016/S0017-9310(01)00314-3.
   Web of Science ®Google Scholar
• Y. Rao, B. Li and Y. Feng, “Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimples,” Exper. Thermal Fluid Sci., vol. 61, pp. 201–209, 2015. DOI: 10.1016/j.expthermflusci.2014.10.030.
   Web of Science ®Google Scholar
• S. W. Moon and S. C. Lau, “Turbulent heat transfer measurements on a wall with concave and cylindrical dimples in a square channel,” In Proceedings of the ASME Turbo Expo 2002: Power for Land, Sea, and Air, vol. 3: Turbo Expo 2002, Parts A and B. Amsterdam, The Netherlands: ASME. June 3–6, 2002, pp. 459–467. DOI: 10.1115/GT2002-30208.
   Google Scholar
• F. Zhou and S. Acharya. “Experimental and computational study of heat/mass transfer and flow structure for four dimple shapes in a square internal passage,” In Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea, and Air, vol. 3: Heat Transfer, Parts A and B. Orlando, Florida, USA: ASME. June 8–12, 2009, pp. 939–953. DOI: 10.1115/GT2009-60240.
   Google Scholar
• Y. Xie, H. Qu and D. Zhang, “Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion,” Int. J. Heat Mass Transfer, vol. 84, pp. 486–496, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.01.055.
   Web of Science ®Google Scholar
• S. D. Hwang, H. G. Kwon and H. H. Cho, “Heat transfer with dimple/protrusion arrays in a rectangular duct with a low Reynolds number range,” Int. J. Heat Fluid Flow, vol. 29, no. 4, pp. 916–926, 2008. DOI: 10.1016/j.ijheatfluidflow.2008.01.004.
   Web of Science ®Google Scholar
• I. Kaur, P. Singh and S. V. Ekkad, “Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling,” Int. J. Heat Mass Transfer, vol. 149, pp. 119221, 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119221.
   Web of Science ®Google Scholar
• H. N. Jang, J. S. Park and J. S. Kwak, “Experimental study on heat transfer characteristics in a ribbed channel with dimples, semi-spherical protrusions, or oval protrusions,” Appl. Thermal Eng., vol. 131, pp. 734–742, 2018. DOI: 10.1016/j.applthermaleng.2017.12.030.
   Web of Science ®Google Scholar
• P. M. Ligrani, G. I. Mahmood, J. L. Harrison, C. M. Clayton and D. L. Nelson, “Flow structure and local Nusselt number variations in a channel with dimples and protrusions on opposite walls,” Int. J. Heat Mass Transfer, vol. 44, no. 23, pp. 4413–4425, 2001. DOI: 10.1016/S0017-9310(01)00101-6.
   Web of Science ®Google Scholar
• P. Singh and S. Ekkad, “Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples,” Appl. Thermal Eng., vol. 116, pp. 205–216, 2017. DOI: 10.1016/j.applthermaleng.2017.01.098.
   Web of Science ®Google Scholar
• P. Singh, J. Pandit and S. V. Ekkad, “Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples,” Int. J. Heat Mass Transfer, vol. 106, pp. 629–647, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.09.037.
   Web of Science ®Google Scholar
• Z. Shen, Y. Xie and D. Zhang, “Numerical predictions on fluid flow and heat transfer in U-shaped channel with the combination of ribs, dimples and protrusions under rotational effects,” Int. J. Heat Mass Transfer, vol. 80, pp. 494–512, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.09.057.
   Web of Science ®Google Scholar
• A. Murata, S. Nishida, H. Saito, K. Iwamoto, Y. Okita and C. Nakamata, “Heat transfer enhancement due to combination of dimples, protrusions, and ribs in narrow internal passage of gas turbine blade,” ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, American Society of Mechanical Engineers Digital Collection, Jan. 2011, pp. 1173–1182. DOI: 10.1115/GT2011-45356.
   Google Scholar
• E. Y. Choi, Y. D. Choi, W. S. Lee, J. T. Chung and J. S. Kwak, “Heat transfer augmentation using a rib–dimple compound cooling technique,” Appl. Thermal Eng., vol. 51, no. 1–2, pp. 435–441, 2013. DOI: 10.1016/j.applthermaleng.2012.09.041.
   Web of Science ®Google Scholar
• J. Liu, Y. Song, G. Xie and B. Sunden, “Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions,” Energy, vol. 79, pp. 1–19, 2015. DOI: 10.1016/j.energy.2014.05.075.
   Web of Science ®Google Scholar
• Y. Li, Y. Rao, D. Wang, P. Zhang and X. Wu, “Heat transfer and pressure loss of turbulent flow in channels with miniature structured ribs on one wall,” Int. J. Heat Mass Transfer, vol. 131, pp. 584–593, 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.067.
   Web of Science ®Google Scholar
• C. Neil Jordan and L. M. Wright, “Heat transfer enhancement in a rectangular (AR= 3: 1) channel with V-shaped dimples,” J. Turbomachinery, vol. 135, no. 1, 2013. DOI: 10.1115/1.4006422.
   Web of Science ®Google Scholar
• T. Hagari, K. Ishida, T. Oda, Y. Douura and Y. Kinoshita, “Heat transfer and pressure losses of w-shaped small ribs at high reynolds numbers for combustor liner,” J. Eng. Gas Turbines Power, vol. 133, no. 9, 2011. DOI: 10.1115/1.4002878.
   Web of Science ®Google Scholar
• A. Ooi, G. Iaccarino, P. A. Durbin and M. Behnia, “Reynolds averaged simulation of flow and heat transfer in ribbed ducts,” Int. J. Heat Fluid Flow, vol. 23, no. 6, pp. 750–757, 2002. DOI: 10.1016/S0142-727X(02)00188-1.
   Web of Science ®Google Scholar
• G. C. Rau, M. Akan, D. Moeller and T. Arts, “The effect of periodic ribs on the local aerodynamic and heat transfer performance of a straight cooling channel,” ASME. J. Turbomach, vol. 120, no. 2, pp. 368–375, 1998. DOI: 10.1115/1.2841415.
   Google Scholar
• K. Abe, T. Kondoh and Y. Nagano, “A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows—I. Flow field calculations,” Int. J. Heat Mass Transfer, vol. 37, no. 1, pp. 139–151, 1994. DOI: 10.1016/0017-9310(94)90168-6.
   Web of Science ®Google Scholar