Numerical simulation on heat transfer inside and outside of vertical buried pipes based on two-model order reduction methods

References

• L. Aresti, P. Christodoulides, and G. Florides, “A review of the design aspects of ground heat exchangers,” Renew. Sustain. Energy Rev., vol. 92, no. 4, pp. 757–773, 2018. DOI: 10.1016/j.rser.2018.04.053.
   Google Scholar
• M. Li and A. C. K. Lai, “Review of analytical models for heat transfer by vertical ground heat exchangers (GHEs): A perspective of time and space scales,” Appl. Energy, vol. 151, pp. 178–191, 2015. DOI: 10.1016/j.apenergy.2015.04.070.
   Web of Science ®Google Scholar
• M. Z. Olfman, A. D. Woodbury, and J. Bartley, “Effects of depth and material property variations on the ground temperature response to heating by a deep vertical ground heat exchanger in purely conductive media,” Geothermics, vol. 51, pp. 9–30, 2014. DOI: 10.1016/j.geothermics.2013.10.002.
   Web of Science ®Google Scholar
• A. Angelotti, L. Alberti, I. L. Licata, and M. Antelmi, “Energy performance and thermal impact of a Borehole Heat Exchanger in a sandy aquifer: Influence of the groundwater velocity,” Energy Convers. Manag., vol. 77, pp. 700–708, 2014. DOI: 10.1016/j.enconman.2013.10.018.
   Web of Science ®Google Scholar
• S. J. Cao, X. R. Kong, Y. Deng, W. Zhang, L. Yang, and Z. P. Ye, “Investigation on thermal performance of steel heat exchanger for ground source heat pump systems using full-scale experiments and numerical simulations,” Appl. Therm. Eng., vol. 115, pp. 91–98, 2017. DOI: 10.1016/j.applthermaleng.2016.12.098.
   Web of Science ®Google Scholar
• C. Li, Y. Guan, X. Wang, G. Li, C. Zhou, and Y. Xun, “Experimental and numerical studies on heat transfer characteristics of vertical deep-buried U-bend pipe to supply heat in buildings with geothermal energy,” Energy, vol. 142, pp. 689–701, 2018. DOI: 10.1016/j.energy.2017.10.056.
   Web of Science ®Google Scholar
• C. Li, Y. Guan and X. Wang, “Study on reasonable selection of insulation depth of the outlet section of vertical deep-buried U-bend tube heat exchanger,” Energy Build., vol. 167, pp. 231–239, 2018. DOI: 10.1016/j.enbuild.2018.02.047.
   Web of Science ®Google Scholar
• R. Saeidi, Y. Noorollahi, and V. Esfahanian, “Numerical simulation of a novel spiral type ground heat exchanger for enhancing heat transfer performance of geothermal heat pump,” Energy Convers. Manag., vol. 168, no. 2, pp. 296–307, 2018. DOI: 10.1016/j.enconman.2018.05.015.
   Google Scholar
• N. Kuzmic, Y. L. E. Law, and S. B. Dworkin, “Numerical heat transfer comparison study of hybrid and non-hybrid ground source heat pump systems,” Appl. Energy, vol. 165, pp. 919–929, 2016. DOI: 10.1016/j.apenergy.2015.12.122.
   Web of Science ®Google Scholar
• Y. Guan, X. Zhao, G. Wang, J. Dai, and H. Zhang, “3D dynamic numerical programming and calculation of vertical buried tube heat exchanger performance of ground-source heat pumps under coupled heat transfer inside and outside of tube,” Energy Build., vol. 139, pp. 186–196, 2017. DOI: 10.1016/j.enbuild.2017.01.023.
   Web of Science ®Google Scholar
• H. Su, et al., “Fast simulation of a vertical U-tube ground heat exchanger by using a one-dimensional transient numerical model,” Numer. Heat Transf. Part A Appl., vol. 60, no. 4, pp. 328–346, 2011. DOI: 10.1080/10407782.2011.600600.
   Web of Science ®Google Scholar
• Q. Liao, C. Zhou, W. Cui, and T. C. Jen, “Effective borehole thermal resistance of a single U-tube ground heat exchanger,” Numer. Heat Transf. Part A Appl., vol. 62, no. 3, pp. 197–210, 2012. DOI: 10.1080/10407782.2012.691061.
   Web of Science ®Google Scholar
• C. Wang, Z. Huang, Y. Lu, X. Huang, and H. Fang, “A simplified semi-numerical model to simulate a U-pipe ground heat exchanger,” Numer. Heat Transf. Part A Appl., vol. 77, no. 5, pp. 482–496, 2020. DOI: 10.1080/10407782.2020.1713625.
   Web of Science ®Google Scholar
• N. Kayaci and H. Demir, “Numerical modelling of transient soil temperature distribution for horizontal ground heat exchanger of ground source heat pump,” Geothermics, vol. 73, pp. 33–47, 2018. DOI: 10.1016/j.geothermics.2018.01.009.
   Web of Science ®Google Scholar
• Y. Jiang, Model Order Reduction Methods. Beijing: Science Press, 2010,
   Google Scholar
• A. Sikander and R. Prasad, “Linear time-invariant system reduction using a mixed methods approach,” Appl. Math. Model, vol. 39, no. 16, pp. 4848–4858, 2015. DOI: 10.1016/j.apm.2015.04.014.
   Web of Science ®Google Scholar
• Z. H. Xiao and Y. L. Jiang, “Model order reduction of MIMO bilinear systems by multi-order Arnoldi method,” Syst. Control Lett., vol. 94, pp. 1–10, 2016. DOI: 10.1016/j.sysconle.2016.04.005.
   Web of Science ®Google Scholar
• S. A. Nahvi, M. Nabi, and S. Janardhanan, “Piece-wise quasi-linear approximation for nonlinear model reduction,” IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., vol. 32, no. 12, pp. 2009–2013, 2013. DOI: 10.1109/TCAD.2013.2275260.
   Web of Science ®Google Scholar
• Y. Jiang, New Methods in Engineering Mathematics. Beijing: Higher Education Press, 2013.
   Google Scholar
• Y. Jiang, Wave Relaxation Methods. Beijing: Science Press, 2013.
   Google Scholar
• D. Kim and J. E. Braun, “A general approach for generating reduced-order models for large multi-zone buildings,” J. Build. Perform. Simul., vol. 8, no. 6, pp. 435–448, 2015. DOI: 10.1080/19401493.2014.977952.
   Web of Science ®Google Scholar
• E. J. Kim, X. He, J. J. Roux, K. Johannes, and F. Kuznik, “Fast and accurate district heating and cooling energy demand and load calculations using reduced-order modelling,” Appl. Energy, vol. 238, pp. 963–971, 2019. DOI: 10.1016/j.apenergy.2019.01.183.
   Google Scholar
• M. Robillart, P. Schalbart, F. Chaplais, and B. Peuportier, “Model reduction and model predictive control of energy-efficient buildings for electrical heating load shifting,” J. Process Control, vol. 74, pp. 23–34, 2019. DOI: 10.1016/j.jprocont.2018.03.007.
   Google Scholar
• Y. Gao, R. Fan, Q. L. Zhang, and J. J. Roux, “Building dynamic thermal simulation of low-order multidimensional heat transfer,” J. Cent. South Univ., vol. 21, no. 1, pp. 293–302, 2014. DOI: 10.1007/s11771-014-1940-5.
   Google Scholar
• R. D. Meyer and G. Tan, “Provide detailed and real-time indoor environmental information using POD-LSE and limited measurements,” Energy Build, vol. 73, pp. 59–68, 2014. DOI: 10.1016/j.enbuild.2014.01.015.
   Web of Science ®Google Scholar
• Q. Kong, X. He, and Y. Jiang, “Fast simulation of dynamic heat transfer through building envelope via model order reduction,” Build. Simul., vol. 10, no. 3, pp. 419–429, 2017. DOI: 10.1007/s12273-016-0327-y.
   Web of Science ®Google Scholar
• X. Wang, Y. Jiang, and X. Kong, “Laguerre functions approximation for model reduction of second order time-delay systems,” J. Franklin Inst., vol. 353, no. 14, pp. 3560–3577, 2016. DOI: 10.1016/j.jfranklin.2016.06.024.
   Google Scholar
• X. Wang and Y. Jiang, “Model reduction of discrete-time bilinear systems by a Laguerre expansion technique,” Appl. Math. Model, vol. 40, no. 13–14, pp. 6650–6662, 2016. DOI: 10.1016/j.apm.2016.02.015.
   Google Scholar
• W. Tao, Numerical Heat Transfer, 2nd ed. Xi'an: Xi'an Jiaotong University Press, 2001.
   Google Scholar
• R. W. Freund, “Model reduction methods based on Krylov subspaces,” Acta Numer, vol. 12, pp. 267–319, 2003. DOI: 10.1017/S0962492902000120
   Google Scholar
• A. C. Antoulas, “An overview of approximation methods for large-scale dynamical systems,” Annu. Rev. Control, vol. 29, no. 2, pp. 181–190, 2005. DOI: 10.1016/j.arcontrol.2005.08.002.
   Web of Science ®Google Scholar
• Y. Saad, Iterative Methods for Sparse Linear Systems. Philadelphia: SIAM, 2003.
   Google Scholar
• S. Yang and W. Tao, Heat Transfer, 4th ed. Beijing: Higher Education Press, 2006.
   Google Scholar