References
- J. W. Joyner, P. Zarkesh-Ha, J. A. Davis, and J. D. Meindl, “A three-dimensional stochastic wire-length distribution for variable separation of strata,” presented at the Proceedings of the IEEE 2000 International Interconnect Technology Conference, Burlingame, CA, USA, 2000, pp. 126–128.
- K. Banerjee, S. Souri, P. Kapur, and K. C. Saraswat, “3-D ICs: A novel chip design for improving deep submicron interconnect performance and system-on-chip integration,” Proceedings of the IEEE, vol. 89, no. 5, pp.602–633, 2001. DOI: https://doi.org/10.1109/5.929647.
- S. Im and K. Banerjee, “Full chip thermal analysis of planar (2-D) and vertically integrated (3-D) high- performance ICs,” presented at the International Electron Devices Meeting, 2000. Technical Digest, IEDM, 2000, pp. 727–730.
- F. Tavakkoli, S. Ebrahimi, S. Wang, and K. Vafai, “Analysis of critical thermal issues in 3D integrated circuits,” Int. J. Heat Mass Transf., vol. 97, pp. 337–352, 2016. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2016.02.010.
- K. Banerjee, A. Amerasekera, G. Dixit, and C. Hu, “The effect of interconnect scaling and low-k dielectric on the thermal characteristics of the IC metal,” presented at the International Electron Devices Meeting. Technical Digest, San Francisco, CA, USA, pp. 65–68, 1996.
- K. E. Goodson and Y. S. Ju, “Heat conduction in novel electronic films,” Annu. Rev. Mater. Sci, vol. 29, no. 1, pp. 261–293, 1999. DOI: https://doi.org/10.1146/annurev.matsci.29.1.261.
- K. C. Saraswat, K. Banerjee, A. R. Joshi, P. Kalavade, P. Kapur, and S. J. Souri, “3-D ICs: Motivation, performance analysis, and technology,” in Proc. 26th Eur. Solid-State Circuits Conf. (ESSCIRC), Stockholm, Sweden, Sept. 19 –21, 2000.
- A. K. Coskun, J. L. Ayala, D. Atienza, T. S. Rosing and Y. Leblebici, “Dynamic thermal management in 3D multicore architectures,” presented at the 2009 Design, Automation Test in Europe Conference Exhibition, Nice, France, 2009, pp. 1410–1415.
- F. Tavakkoli, S. Ebrahimi, S. Wang and K. Vafai, “Thermophysical and geometrical effects on the thermal performance and optimization of a three dimensional integrated circuit,” J. Heat Transf., vol. 138, pp. 082101-1–082101-7, 2016.
- L. A. O. Rocha, S. Lorente, and A. Bejan, “Constructal design for cooling a disc-shaped area by conduction,” Int. J. Heat Mass Transf., vol. 45, no. 8, pp. 1643–1652, 2002. DOI: https://doi.org/10.1016/S0017-9310(01)00269-1.
- L. A. O. Rocha, S. Lorente, and A. Bejan, “Conduction tree networks with loops for cooling a heat- generating volume,” Int. J. Heat Mass Transf., vol. 49, no. 15–16, pp. 2626–2635, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.01.017.
- A. K. da Silva, C. Vasile and A. Bejan, “Disc cooled with high-conductivity inserts that extend inward from the perimeter,” Int. J. Heat Mass Transf., vol. 47, no. 19–20, pp. 4257–4263, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.04.024.
- L. Ghodoossi and N. Egrican, “Exact solution for cooling of electronics using constructal theory,” J. Appl. Phys., vol. 93, no. 8, pp. 4922–4929, 2003. DOI: https://doi.org/10.1063/1.1562008.
- F. Sharifi, H. Ghaedamini, and M. R. Salimpour, “Using incomplete variable cross-section highly conductive inserts for cooling a disc,” Front. Heat Mass Transf., vol. 3, no. 043005, pp. 043005-1–043005-10, 2012.
- B. Nazari, M. R. Salimpour and S. Mahjoub, “Optimal mechanical and thermal architecture of high-conductivity inserts for cooling an electronic piece,” J. Therm. Anal. Calorim., vol. 138, no. 2, pp. 1499–1514, 2019. pp DOI: https://doi.org/10.1007/s10973-019-08275-9.
- C. Wang, X.-J. Huang, and K. Vafai, “Analysis of hotspots and cooling strategy for multilayer three-dimensional integrated circuits,” Appl. Therm. Eng. vol. 186, pp. 116336-1–116336-13, 2021. DOI: https://doi.org/10.1016/j.applthermaleng.2020.116336.
- A. Tavakoli and K. Vafai, “Design and optimization of a composite heat spreader to improve the thermal management of a 3d integrated circuit,” J. Heat Transf. Published online. DOI: https://doi.org/10.1115/1.4050922.
- V. S. Arpaci, Conduction Heat Transfer, 2nd ed. New Jersey: Addison-Wesley, 1966, chapter 4, p. 235.