References
- A. Faghri, “Heat pipes: review, opportunities and challenges,” Front. Heat Pipes, vol. 5, no. 1, pp. 1–48, 2014. DOI: https://doi.org/10.5098/fhp.5.1.
- M. Može, A. Nemanič, and P. Poredoš, “Experimental and numerical heat transfer analysis of heat-pipe-based CPU coolers and performance optimization methodology,” Appl. Therm. Eng., vol. 179, pp. 115720, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115720.
- A. Faghri, Heat Pipe Science and Technology, 2nd ed. Columbia, MO, USA: Global Digital Press, 2016.
- H. Shabgard, T. L. Bergman, N. Sharifi, and A. Faghri, “High temperature latent heat thermal energy storage using heat pipes,” Int. J. Heat Mass Transfer, vol. 53, no. 15–16, pp. 2979–2988, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.03.035.
- J. M. Maldonado, A. de Gracia, and L. F. Cabeza, “Systematic review on the use of heat pipes in latent heat thermal energy storage tanks,” J. Energy Storage, vol. 32, pp. 101733, 2020. DOI: https://doi.org/10.1016/j.est.2020.101733.
- Y. Cao and A. Faghri, “Conjugate modeling of high-temperature nosecap and wing leading edge heat pipes,” J. Heat Transfer, vol. 115, no. 3, pp. 819–822, 1993. DOI: https://doi.org/10.1115/1.2910765.
- S. Kloczko and A. Faghri, “Thermal performance and flow characteristics of two-phase loop thermosyphons,” Numer. Heat Transfer A: Appl., vol. 77, no. 7, pp. 683–701, 2020. DOI: https://doi.org/10.1080/10407782.2020.1714342.
- Y. Cao and A. Faghri, “Transient two-dimensional compressible analysis for high-temperature heat pipes with pulsed heat input,” Numer. Heat Transfer A: Appl., vol. 18, no. 4, pp. 483–502, 1991. DOI: https://doi.org/10.1080/10407789008944804.
- J. Rice and A. Faghri, “Analysis of screen wick heat pipes, including capillary dry-out limitations,” J. Thermophys. Heat Transfer, vol. 21, no. 3, pp. 475–486, 2007. DOI: https://doi.org/10.2514/1.24809.
- T. L.Bergman and A. Faghri, “Review of advances in heat pipe analysis and numerical simulation,” in Numerical Simulation Heat Exchangers. New York, USA: CRC Press, 2017, pp. 173–212.
- H. Tang, C. Weng, Y. Tang, Y. Lu, and T. Fu, “Effect of inclination angle on the thermal performance of an ultrathin heat pipe with multi-scale wick structure,” Int. Commun. Heat Mass Transfer, vol. 118, pp. 104908, 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2020.104908.
- A. Faghri, M. Buchko, and Y. Cao, “A study of high-temperature heat pipes with multiple heat sources and sinks: part I—experimental methodology and frozen startup profiles,” J. Heat Transfer, vol. 113, no. 4, pp. 1003–1009, 1991. DOI: https://doi.org/10.1115/1.2911193.
- S. De Schampheleire, K. De Kerpel, T. Deruyter, P. D. Jaeger, and M. De Paepe, “Experimental study of small diameter fibres as wick material for capillary-driven heat pipes,” Appl. Therm. Eng., vol. 78, pp. 258–267, 2015. DOI: https://doi.org/10.1016/j.applthermaleng.2014.12.027.
- G. Kumaresan, S. Venkatachalapathy, and L. G. Asirvatham, “Experimental investigation on enhancement in thermal characteristics of sintered wick heat pipe using CuO nanofluids,” Int. J. Heat Mass Transfer, vol. 72, pp. 507–516, 2014. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2014.01.029.
- M. H. A. Elnaggar, M. Z. Abdullah, and M. A. Mujeebu, “Experimental investigation and optimization of heat input and coolant velocity of finned twin U-shaped heat pipe for CPU cooling,” Exp. Tech., vol. 37, no. 6, pp. 34–40, 2013. DOI: https://doi.org/10.1111/j.1747-1567.2011.00757.x.
- S. Miao, J. Sui, Y. Zhang, F. Yao, and X. Liu, “Experimental study on thermal performance of a bent copper-water heat pipe,” Int. J. Aerospace Eng., vol. 2020, pp. 1–10, 2020. DOI: https://doi.org/10.1155/2020/8632152.
- A. Johns, E. Thurlow, F. Barez, and Y. Shabany “Performance evaluation of bent heat pipes,” 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), San Diego, CA, USA, May 29–June 1, 2018, pp. 302–310. DOI: https://doi.org/10.1109/ITHERM.2018.8419621.
- D. D. Odhekar and D. K. Harris, “Experimental investigation of bendable heat pipes using sintered copper felt wick,” Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006, San Diego, CA, USA, May 30–June 2, 2006. pp. 8–577. DOI: https://doi.org/10.1109/ITHERM.2006.1645396.
- C. Liu, Q. Li, and D. Fan, “Fabrication and performance evaluation of flexible flat heat pipes for the thermal control of deployable structure,” Int. J. Heat Mass Transfer, vol. 144, pp. 118661, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118661.
- C. Yang, C. Song, W. Shang, P. Tao, and T. Deng, “Flexible heat pipes with integrated bioinspired design,” Prog. Nat. Sci.: Mater. Int., vol. 25, no. 1, pp. 51–57, 2015. DOI: https://doi.org/10.1016/j.pnsc.2015.01.011.
- J. H. Patel, P. C. Chhotani, and S. S. Multani, “An experimental study on the effect of wick structure with different working fluid on performance of L-shaped heat pipe,” Int. J. Eng. Res. Technol. (IJERT), vol. 3, no. 6, pp. 441–444, 2014.
- J. Wang, “Experimental investigation of the transient thermal performance of a bent heat pipe with grooved surface,” Appl. Energy, vol. 86, no. 10, pp. 2030–2037, 2009. DOI: https://doi.org/10.1016/j.apenergy.2009.01.003.
- M. A. Merrigan, M. G. Elder, E. S. Keddy, and J. T. Sena, “Heat pipe technology development for high temperature space radiator applications,” Proceedings, Intersociety Energy Conversion Engineering Conference, USA, 1984, pp. 592–597. Available: http://inis.iaea.org/search/search.aspx?orig_q=RN:16068234.
- L.-L. Jiang, Y. Tang, and M.-Q. Pan, “Effects of bending on heat transfer performance of axial micro-grooved heat pipe,” J. Cent. South Univ. Technol., vol. 18, no. 2, pp. 580–586, 2011. DOI: https://doi.org/10.1007/s11771-011-0734-2.
- B. Habibnezhad Ledari and M. Sabzpooshani, “A comparative empirical investigation on the thermal performance of gravity-assisted double-bent, double-ended cooling, and single-bent, single-ended cooling heat pipes,” Int. Commun. Heat Mass Transfer, vol. 112, pp. 104505, 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2020.104505.
- N. Sangpab et al., “Combined effect of bending and flattening on heat transfer performance of cryogenic sintered-wick heat pipe,” Appl. Therm. Eng., vol. 148, pp. 878–885, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2018.10.099.
- C. Yang et al., “Fabrication and performance evaluation of flexible heat pipes for potential thermal control of foldable electronics,” Appl. Therm. Eng., vol. 95, pp. 445–453, 2016. DOI: https://doi.org/10.1016/j.applthermaleng.2015.11.078.
- M. H. A. Elnaggar, M. Z. Abdullah, and M. A. Mujeebu, “Characterization of working fluid in vertically mounted finned U-shape twin heat pipe for electronic cooling,” Energy Convers. Manag., vol. 62, pp. 31–39, 2012. DOI: https://doi.org/10.1016/j.enconman.2012.03.020.
- M. H. A. Elnaggar, “Numerical investigation of characteristics of wick structure and working fluid of U-shape heat pipe for CPU cooling,” Microelectron. Rel., vol. 54, no. 1, pp. 297–302, 2014. DOI: https://doi.org/10.1016/j.microrel.2013.08.019.
- P. Sakulchangsatjatai et al., “Effect of tube bending on heat transfer characteristics of miniature heat pipe with sintered porous media,” DDF, vol. 312–315, pp. 1015–1020, 2011. DOI: https://doi.org/10.4028/www.scientific.net/DDF.312-315.1015.
- A. Faghri and Y. Zhang, Fundamentals of Multiphase Heat Transfer and Flow. Cham, Switzerland: Springer International Publishing, 2020
- A. Faghri, “Heat pipes and thermosyphons,” in Handbook of thermal science and engineering. Cham: Springer International Publishing, 2018, pp. 2163–2211.
- W. R. Dean and J. M. Hurst, “Note on the motion of fluid in a curved pipe,” Mathematika, vol. 6, no. 1, pp. 77–85, 1959. DOI: https://doi.org/10.1112/S0025579300001947.
- M. Mahdavi and A. Faghri, “The effects of bending on heat pipes,” ASME Summer Heat Transfer Conference, Virtual Conference, Online, 2021.