References
- S. Göll and M. Piesche, “Multi-component gas transport in micro-porous domains: Multidimensional simulation at the macroscale,” Int. J. Heat Mass Transfer, vol. 55, no. 1–3, pp. 480–487, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2011.09.049.
- B. Deng, Y. Qiu and C. N. Kim, “An improved porous medium model for microchannel heat sinks,” Appl. Therm. Eng., vol. 30, no. 16, pp. 2512–2517, 2010. DOI: https://doi.org/10.1016/j.applthermaleng.2010.06.025.
- T.-C. Hung and W.-M. Yan, “Optimization of Design Parameters for a Sandwich-Distribution Porous-Microchannel Heat Sink,” Numer. Heat Transfer A Applicat., vol. 66, no. 3, pp. 229–251, 2014. DOI: https://doi.org/10.1080/10407782.2013.872978.
- G. Lu, J. Zhao, L. Lin, X.-D. Wang and W.-M. Yan, “A new scheme for reducing pressure drop and thermal resistance simultaneously in microchannel heat sinks with wavy porous fins,” Int. J. Heat Mass Transfer, vol. 111, pp. 1071–1078, 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.086.
- A. Ghahremannezhad, H. Xu, M. A. Nazari, M. H. Ahmadi and K. Vafai, “Effect of porous substrates on thermohydraulic performance enhancement of double layer microchannel heat sinks,” Int. J. Heat Mass Transfer, vol. 131, pp. 52–63, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.11.040.
- R. Singh, A. Akbarzadeh and M. Mochizukib, “Sintered porous heat sink for cooling of high-powered microprocessors for server applications,” Int. J. Heat Mass Transfer, vol. 52, no. 9-10, pp. 2289–2299, 2009. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.11.016.
- T.-C. Hung and W.-M. Yan, “Thermal Performance Enhancement of Microchannel Heat Sinks with Sintered Porous Media,” Numer. Heat Transfer A: Applicat., vol. 63, no. 9, pp. 666–686, 2013. DOI: https://doi.org/10.1080/10407782.2013.751778.
- N. Yucel and R. T. Guven, “Numerical Study of Heat Transfer in a Rectangular Channel with Porous Covering Obstacles,” Transp. Porous Med., vol. 77, no. 1, pp. 41–58, 2009. DOI: https://doi.org/10.1007/s11242-008-9260-6.
- A. Zehforoosh and S. Hossainpour, “Numerical investigation of pressure drop reduction without surrendering heat transfer enhancement in partially porous channel,” Int. J. Therm. Sci., vol. 49, no. 9, pp. 1649–1662, 2010. DOI: https://doi.org/10.1016/j.ijthermalsci.2010.05.016.
- L. Chuan, X.-D. Wang, T.-H. Wang and W.-M. Yan, “Fluid flow and heat transfer in microchannel heat sink based on porous fin design concept,” Int. Commun. Heat Mass Transfer, vol. 65, pp. 52–57, 2015. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2015.04.005.
- P.-X. Jiang, M. Li, T.-J. Lu, L. Yu and Z.-P. Ren, “Experimental research on convection heat transfer in sintered porous plate channels,” Int. J. Heat Mass Transfer, vol. 47, no. 10-11, pp. 2085–2096, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.004.
- Y.-T. Yang and C.-Z. Hwang, “Calculation of Turbulent Flow and Heat Transfer in a Porous-baffled Channel,” Int. J. Heat Mass Transfer, vol. 46, no. 5, pp. 771–780, 2003. DOI: https://doi.org/10.1016/S0017-9310(02)00360-5.
- D. B. Tuckerman and R. Pease, “High-performance heat sinking for VLSI,” IEEE Electron Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: https://doi.org/10.1109/EDL.1981.25367.
- A. Haji-Sheikh, D. Nield and K. Hooman, “Heat transfer in the thermal entrance region for flow through rectangular porous passages,” Int. J. Heat Mass Transfer, vol. 49, no. 17-18, pp. 3004–3015, 2006. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.01.040.
- A. Tamayol, A. Khosla, B. Gray and M. Bahrami, “Creeping flow through ordered arrays of micro-cylinders embedded in a rectangular minichannel,” Int. J. Heat Mass Transfer, vol. 55, no. 15-16, pp. 3900–3908, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.03.008.
- S. Chikh, A. Boumedien, K. Bouhadef and G. Lauriat, “Analysis of fluid flow and heat transfer in a channel with intermittent heated porous blocks,” Heat Mass Transfer, vol. 33, no. 5-6, pp. 405–413, 1998. DOI: https://doi.org/10.1007/s002310050208.
- C. Zhao and T. Lu, “Analysis of microchannel heat sinks for electronics cooling,” Int. J. Heat Mass Transfer, vol. 45, no. 24, pp. 4857–4869, 2002. DOI: https://doi.org/10.1016/S0017-9310(02)00180-1.
- V. V. Calmidi and R. L. Mahajan, “Forced convection in high porosity metal foams,” ASME J. Heat Transfer, vol. 122, no. 3, pp. 557–565, 2000. DOI: https://doi.org/10.1115/1.1287793.
- C.-H. Chen, “Forced convection heat transfer in microchannel heat sinks,” Int. J. Heat Mass Transfer, vol. 50, no. 11-12, pp. 2182–2189, 2007. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2006.11.001.
- D. Liu and S. V. Garimella, “Analysis and optimization of the thermal performance of microchannel heat sinks,” Int. J. Num. Meth. HFF, vol. 15, no. 1, pp. 7–26, 2005. DOI: https://doi.org/10.1108/09615530510571921.
- F. Alfieri, M. K. Tiwari, I. Zinovik, T. Brunschwiler, B. Michel and D. Poulikakos, “On the significance of developing boundary layers in integrated water cooled 3D chip stacks,” Int. J. Heat Mass Transfer, vol. 55, no. 19–20, pp. 5222–5232, 2012. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.029.
- G. Hetsroni, M. Gurevich and R. Rozenblit, “Sintered porous medium heat sink for cooling of high-power mini-devices,” Int. J. Heat Fluid Flow, vol. 27, no. 2, pp. 259–266, 2006. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2005.08.005.
- H. Xu, “Thermal transport in microchannels partially filled with micro-porous media involving flow inertia, flow/thermal slips, thermal non-equilibrium and thermal asymmetry,” Int. Commun. Heat Mass Transfer, vol. 110, pp. 104404, 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2019.104404.
- P. C. Huang and K. Vafai, “Analysis of forced convection enhancement in a channel using porous blocks,” J. Thermophys. Heat Transfer, vol. 8, no. 3, pp. 563–573, 1994. DOI: https://doi.org/10.2514/3.579.
- P. C. Huang and K. Vafai, “Flow and heat transfer control over an external surface using a porous block array arrangement,” Int. J. Heat Mass Transfer, vol. 36, no. 16, pp. 4019–4032, 1993. DOI: https://doi.org/10.1016/0017-9310(93)90152-V.
- K. Hooman, “Heat and fluid flow in a rectangular microchannel filled with a porous medium,” Int. J. Heat Mass Transfer, vol. 51, no. 25-26, pp. 5804–5810, 2008. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2008.05.010.
- K. M. Elsafy and M. Z. Saghir, “Forced convection in wavy microchannels porous media using TiO2 and Al2O3-Cu nanoparticles in water base fluids: numerical results,” Micromachines, vol. 12, no. 6, pp. 654, 2021. DOI: https://doi.org/10.3390/mi12060654.
- M. Ghazvini and H. Shokouhmand, “Investigation of a nanofluid-cooled microchannel heat sink using Fin and porous media approaches,” Energy Conversion manage., vol. 50, no. 9, pp. 2373–2380, 2009. DOI: https://doi.org/10.1016/j.enconman.2009.05.021.
- O. M. Haddad, M. M. Abuzaid and M. A. Al-Nimr, “Developing free-convection gas flow in a vertical open-ended microchannel filled with porous media,” Numer. Heat Transfer Part A: Applicat., vol. 48, no. 7, pp. 693–710, 2005. DOI: https://doi.org/10.1080/10407780590968006.
- P.-X. Jiang, M. Li, Y.-C. Ma and Z.-P. Ren, “Boundary conditions and wall effect for forced convection heat transfer in sintered porous plate channels,” Int. J. Heat Mass Transfer, vol. 47, no. 10-11, pp. 2073–2083, 2004. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.003.
- S. J. Kim and D. Kim, “Forced convection in microstructures for electronic equipment cooling,” ASME J. Heat Transfer, vol. 121, no. 3, pp. 639–645, 1999. DOI: https://doi.org/10.1115/1.2826027.
- S. Dathathri and C. Balaji, “Heat transfer and optimization studies on layered porous stackings under an imposed pressure drop,” Int. Commun. Heat Mass Transfer, vol. 60, pp. 32–36, 2015. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2014.11.009.
- T.-H. Tsai and R. Chein, “Performance analysis of nanofluid-cooled microchannel heat sinks,” Int. J. Heat Fluid Flow, vol. 28, no. 5, pp. 1013–1026, 2007. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2007.01.007.
- T.-M. Jeng, S.-C. Tzeng and F.-Z. Tang, “Fluid flow and heat transfer characteristics of the porous metallic heat sink with a conductive cylinder partially filled in a rectangular channel,” Int. J. Heat Mass Transfer, vol. 53, no. 19-20, pp. 4216–4227, 2010. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2010.05.044.
- M. Ghorbani, M. R. Salimpour and K. Vafai, “Microchannel thermal performance optimization utilizing porous layer configurations,” Int. J. Heat Mass Transfer, vol. 133, pp. 62–72, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.063.
- H. Xu, C. Zhao and K. Vafai, “Analysis of double slip model for a partially filled porous microchannel—An exact solution,” Eur. J. Mech. B Fluids, vol. 68, pp. 1–9, 2018. DOI: https://doi.org/10.1016/j.euromechflu.2017.10.009.
- T.-C. Hung, Y.-X. Huang and W.-M. Yan, “Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet,” Int. Commun. Heat Mass Transfer, vol. 48, pp. 86–92, 2013. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2013.08.001.
- T.-C. Hung, Y.-X. Huang and W.-M. Yan, “Thermal performance analysis of porous-microchannel heat sinks with different configuration designs,” Int. J. Heat Mass Transfer, vol. 66, pp. 235–243, 2013. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2013.07.019.
- A. Ghahremannezhad and K. Vafai, “Thermal and hydraulic performance enhancement of microchannel heat sinks utilizing porous substrates,” Int. J. Heat Mass Transfer, vol. 122, pp. 1313–1326, 2018. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.02.024.
- M. Shamsoddini Lori and K. Vafai, “Heat transfer and fluid flow analysis of microchannel heat sinks with periodic vertical porous ribs,” Appl. Therm. Eng., vol. 205, 2022. DOI: https://doi.org/10.1016/j.applthermaleng.2022.118059.
- K. Vafai, “Convective flow and heat transfer in variable-porosity media,” J. Fluid Mech., vol. 147, no. 1, pp. 233–259, 1984. DOI: https://doi.org/10.1017/S002211208400207X.
- K. Vafai and C. L. Tien, “Boundary and inertia effects on flow and heat transfer in porous media,” Int. J. Heat Mass Transfer, vol. 24, no. 2, pp. 195–203, 1981. DOI: https://doi.org/10.1016/0017-9310(81)90027-2.
- M. L. Bars and M. G. Worster, “Interfacial conditions between a pure fluid and a porous medium: Implications for binary alloy solidification,” J. Fluid Mech., vol. 550, no. 1, pp. 149–173, 2006. DOI: https://doi.org/10.1017/S0022112005007998.