References
- B. A. Haven, D. K. Yamagata, M. Kurosaka, S. Yamawaki, and T. Maya, “Anti-kidney pair of vortices in shaped holes and their influence on film cooling effectiveness,” ASME Paper No. 97-GT-45, 1997. DOI: https://doi.org/10.1115/97-GT-045.
- J. Andreopoulos and W. Rodi, “Experimental investigation of jets in a crossflow,” J. Fluid Mech., vol. 138, pp. 93–127, 1984. DOI: https://doi.org/10.1017/S0022112084000057.
- C. A. Lemmon, A. Kohli, and K. A. Thole, “Formation of counter-rotating vortices in film-cooling flow,” ASME Paper No. 99-GT-161, 1999.
- T. F. Fric and A. Roshko, “Vortex structure in the wake of a transverse jet,” J. Fluid Mech., vol. 279, pp. 1–47, 1994. DOI: https://doi.org/10.1017/S0022112094003800.
- D. R. Zheng, X. J. Wang, F. Zhang, and Q. Yuan, “Numerical investigation on the effects of the divided steps on film cooling performance,” Appl. Therm. Eng., vol. 124, pp. 653–662, 2017.
- J. Z. Zhang, S. C. Zhang, C. H. Wang, and X. M. Tan, “Recent advances in film cooling enhancement: A review,” Chin. J. Aeronaut., vol. 33, no. 4, pp. 1119–1136, 2020. DOI: https://doi.org/10.1016/j.cja.2019.12.023.
- S. M. Kim, K. D. Lee, and K. Y. Kim, “A comparative analysis of various shaped film-cooling holes,” Heat Mass Transf., vol. 48, no. 11, pp. 1929–1939, 2012. DOI: https://doi.org/10.1007/s00231-012-1043-5.
- C. M. Bell, H. Hamakawa, and P. M. Ligrani, “Film cooling from shaped holes,” ASME J. Heat Transf., vol. 122, no. 2, pp. 224–232, 2000. DOI: https://doi.org/10.1115/1.521484.
- S. Khajehhasani and B. A. Jubran, “Numerical assessment of the film cooling through novel sister-shaped single-hole schemes,” Numer. Heat Transf. A - Appl., vol. 67, no. 4, pp. 414–435, 2015. DOI: https://doi.org/10.1080/10407782.2014.937257.
- R. S. Bunker, “A review of turbine shaped film cooling technology,” ASME J. Heat Transf., vol. 127, no. 4, pp. 441–453, 2005. DOI: https://doi.org/10.1115/1.1860562.
- J.-J. Liu, B.-T. An, J. Liu, and W. Zhan, “Leading edge film cooling enhancement for an inlet guide vane with fan-shaped holes,” J. Therm. Sci., vol. 19, no. 6, pp. 514–518, 2010. DOI: https://doi.org/10.1007/s11630-010-0417-6.
- J. S. Yu, H. P. Sang, and J. K. Yong, “Effects of trench configuration on the film cooling effectiveness of a fan-shaped hole,” Int. J. Heat Mass Transf., vol. 178, p. 121655, 2021.
- M. Gritsch, W. Colban, H. Schär, and K. Döbbeling, “Effect of hole geometry on the thermal performance of fan-shaped film cooling holes,” ASME J. Turbomach., vol. 127, no. 4, pp. 718–725, 2005. DOI: https://doi.org/10.1115/1.2019315.
- K. D. Lee and K. Y. Kim, “Surrogate based optimization of a laidback fan-shaped hole for film-cooling,” Int. J. Heat Fluid Flow, vol. 32, no. 1, pp. 226–238, 2011. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2010.08.007.
- C. H. Wang, J. Z. Zhang, and J. H. Zhou, “Optimization of a fan-shaped hole to improve film cooling performance by RBF neural network and genetic algorithm,” Aerosp. Sci. Technol., vol. 58, pp. 18–25, 2016. DOI: https://doi.org/10.1016/j.ast.2016.08.004.
- K. A. Thole, M. Gritsch, A. Schulz, and S. Wittig, “Flow field measurements for film-cooling holes with expanded exits,” ASME J. Turbomach., vol. 120, no. 2, pp. 327–336, 1998. DOI: https://doi.org/10.1115/1.2841410.
- X. D. Zhu, J. Z. Zhang, and X. M. Tan, “Numerical assessment of round-to-slot film cooling performances on a turbine blade under engine representative conditions,” Int. Commun. Heat Mass Transf., vol. 100, pp. 98–110, 2019. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2018.12.008.
- Y. Huang, J. Z. Zhang, and C. H. Wang, “Shape-optimization of round-to-slot holes for improving film cooling effectiveness on a flat plate,” Heat Mass Transf., vol. 54, no. 6, pp. 1741–1754, 2018. DOI: https://doi.org/10.1007/s00231-017-2272-4.
- J. E. Sargison, S. M. Guo, M. L. G. Oldfield, G. D. Lock, and A. J. Rawlinson, “A converging slot-hole film-cooling geometry - part 1: Low-speed flat-plate heat transfer and loss,” ASME J. Turbomach., vol. 124, no. 3, pp. 453–460, 2002. DOI: https://doi.org/10.1115/1.1459735.
- J. E. Sargison, S. M. Guo, M. L. G. Oldfield, G. D. Lock, and A. J. Rawlinson, “A converging slot-hole film-cooling geometry - part 2: Transonic nozzle guide vane heat transfer and loss,” ASME J. Turbomach., vol. 124, no. 3, pp. 461–471, 2002. DOI: https://doi.org/10.1115/1.1459736.
- R. S. Bunker, “A study of mesh-fed slot film cooling,” ASME J. Turbomach., vol. 131, p. 011022, 2011.
- J. S. Wei, H. R. Zhu, B. L. Zhang, M. Wang, and Y. L. Lu, “Influence of pin fin arrangement on the film cooling characteristics of mesh-fed slot configuration,” J. Eng. Thermophys., vol. 39, pp. 292–300, 2018.
- W. He, Q. Deng, W. Zhou, T. Gao, and Z. Feng, “Film cooling and aerodynamic performance of a turbine nozzle guide vane with trenched cooling holes,” Appl. Therm. Eng., vol. 150, pp. 150–163, 2019. DOI: https://doi.org/10.1016/j.applthermaleng.2019.01.002.
- R. Hou, F. Wen, Y. Luo, X. Tang, and S. Wang, “Large eddy simulation of film cooling flow from round and trenched holes,” Int. J. Heat Mass Transf., vol. 144, p. 118631, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118631.
- R. Hou, F. Wen, T. Cui, X. Tang, and S. Wang, “Effect of different trench lips on downstream film cooling effectiveness and flow fields,” J. Therm. Sci., vol. 28, no. 2, pp. 340–353, 2019. DOI: https://doi.org/10.1007/s11630-018-1061-9.
- M. F. Blair, “An experimental study of heat transfer and film cooling on large-scale turbine endwalls,” ASME J. Heat Transf., vol. 96, no. 4, pp. 524–529, 1974. DOI: https://doi.org/10.1115/1.3450239.
- X. Xiao, P. Wang, Q. Du, Q. Xu, J. Liu, and J. Zhu, “Numerical investigations of film cooling characteristics of interrupted slot and trench holes on a vane endwall,” J. Therm. Sci., vol. 30, no. 3, pp. 1010–1024, 2021. DOI: https://doi.org/10.1007/s11630-021-1468-6.
- Y. Yao and J. Z. Zhang, “Investigation on film cooling characteristics from a row of converging slot-holes on flat plate,” Sci. China Technol. Sci., vol. 54, no. 7, pp. 1793–1800, 2011. DOI: https://doi.org/10.1007/s11431-011-4378-0.
- C. Wang, F. Fan, J. Zhang, Y. Huang, and H. Feng, “Large-eddy simulation of film cooling flow from converging slot-holes,” Int. J. Therm. Sci., vol. 126, pp. 238–251, 2018. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.01.007.
- Y. Yao, J. Z. Zhang, and L. P. Wang, “Film cooling on a gas turbine blade suction side with converging slot-hole,” Int. J. Therm. Sci., vol. 65, pp. 267–279, 2013. DOI: https://doi.org/10.1016/j.ijthermalsci.2012.10.004.
- J. Pu, J. H. Wang, S. Y. Ma, and X. Y. Wu, “An experimental investigation of geometric effect of upstream converging slot-hole on end-wall film cooling and secondary vortex characteristics,” Exp. Therm. Fluid Sci., vol. 69, pp. 58–72, 2015. DOI: https://doi.org/10.1016/j.expthermflusci.2015.08.002.
- A. Guelailia, A. Khorsi, and M. K. Hamidou, “Computation of leading edge film cooling from a CONSOLE geometry (CONverging Slot hOLE),” Thermophys. Aeromech., vol. 23, no. 1, pp. 33–42, 2016. DOI: https://doi.org/10.1134/S0869864316010042.
- R. S. Bunker, “Film cooling effectiveness due to discrete holes within a transverse surface slot,” ASME Paper No. GT2002-30178, 2002. DOI: https://doi.org/10.1115/GT2002-30178.
- R. S. Bunker, “Film cooling: Breaking the limits of diffusion shaped holes,” Heat Trans. Res., vol. 41, no. 6, pp. 627–650, 2010. DOI: https://doi.org/10.1615/HeatTransRes.v41.i6.40.
- D. A. Kistenmacher, F. T. Davidson, and D. G. Bogard, “Realistic trench film cooling with a thermal barrier coating and deposition,” ASME J. Turbomach., vol. 136, p. 091002, 2014.
- S. K. Waye and D. G. Bogard, “High-resolution film cooling effectiveness measurements of axial holes embedded in a transverse trench with various trench configurations,” ASME J. Turbomach., vol. 129, no. 2, pp. 294–302, 2007. DOI: https://doi.org/10.1115/1.2464141.
- S. Baheri, S. Tabrizi, and B. A. Jubran, “Film cooling effectiveness from trenched shaped and compound holes,” Heat Mass Transf., vol. 44, no. 8, pp. 989–998, 2008. DOI: https://doi.org/10.1007/s00231-007-0341-9.
- Y. P. Lu, A. Dhungel, S. V. Ekkad, and R. S. Bunker, “Effect of trench width and depth on film cooling from cylindrical holes embedded in trenches,” ASME J. Turbomach., vol. 131, p. 011003, 2009.
- K. D. Lee and W. Y. Kim, “Film cooling performance of cylindrical holes embedded in a transverse trench,” Numer. Heat Transf. A – Appl., vol. 65, no. 2, pp. 127–143, 2014. DOI: https://doi.org/10.1080/10407782.2013.826106.
- J. S. Wei, H. R. Zhu, C. L. Liu, H. Song, C. Liu, and T. Meng, “Experimental study on the film cooling characteristics of the cylindrical holes embedded in sine-wave shaped trench,” ASME Paper GT2016-56856, 2016. DOI: https://doi.org/10.1115/GT2016-56856.
- B. L. Zhang, L. Zhang, H. R. Zhu, J. S. Wei, and Z. Y. Fu, “Numerical study on the influence of trench width on film cooling characteristics of double-wave trench,” ASME Paper GT2017-63552, 2017. DOI: https://doi.org/10.1115/GT2017-63552.
- H. I. Oguntade, G. E. Andrews, A. D. Burns, D. B. Ingham, and M. Pourkashanian, “Improved trench film cooling with shaped trench outlets,” ASME J. Turbomach., vol. 135, p. 021009, 2013.
- P. Schreivogel, B. Kross, and M. Pfitzne, “Study of an optimized trench film cooling configuration using scale adaptive simulation and infrared thermography,” ASME Paper GT2014-25144, 2014. DOI: https://doi.org/10.1115/GT2014-25144.
- S. D. Barahate and R. P. Vedula, “Film cooling performance measurement over a flat plate for a single row of holes embedded in an inclined trench,” Int. J. Therm. Sci., vol. 150, p. 106515, 2020.
- K. N. Huang, J. Z. Zhang, C. H. Wang, and Y. Shan, “Numerical evaluation on single-row trenched-hole film cooling performances on turbine guide vane under engine-representative conditions,” Numer. Heat Transf. A – Appl., vol. 76, no. 4, pp. 198–219, 2019. DOI: https://doi.org/10.1080/10407782.2019.1627830.
- ANSYS Inc., “ANSYS fluent: user’s guide,” 2020
- J. Smagorinsky, “General circulation experiments with the primitive equations. I. The basic experiment,” Mon. Wea. Rev., vol. 91, no. 3, pp. 99–164, 1963. DOI: https://doi.org/10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2.
- D. K. Lilly, “On the application of the eddy viscosity concept in the inertial subrange of turbulence,” NCAR Manuscript, vol. 123, 1966.
- C. Wang, X. Sun, F. Fan, and J. Zhang, “Study on trench film cooling on turbine vane by large-eddy simulation,” Numer. Heat Transf. A – Appl., vol. 78, no. 7, pp. 338–358, 2020. DOI: https://doi.org/10.1080/10407782.2020.1791523.
- W. Peng and P. X. Jiang, “Large-eddy simulation of film cooling with internal coolant crossflow effects,” J. Propul. Power, vol. 28, no. 1, pp. 160–169, 2012. DOI: https://doi.org/10.2514/1.B34232.
- A. Rozati and D. K. Tafti, “Large-eddy simulations of leading edge film cooling: Analysis of flow structures, effectiveness, and heat transfer coefficient,” Int. J. Heat Fluid Flow, vol. 29, no. 1, pp. 1–17, 2008. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2007.05.001.
- N. Al-Zurfi, A. Turan, A. Nasser, and A. Alhusseny, “A numerical study of anti-vortex film-cooling holes designs in a 1-1/2 turbine stage using LES,” Propuls. Power Res., vol. 8, no. 4, pp. 275–299, 2019. DOI: https://doi.org/10.1016/j.jppr.2019.10.001.
- S. G. Schwarz, R. J. Goldstein, and E. Eckert, “The influence of curvature on film cooling performance,” J. Turbomach.-Trans. ASME, vol. 113, no. 3, pp. 472–478, 1991. DOI: https://doi.org/10.1115/1.2927898.