Numerical investigation of heat transfer in a tube equipped with twisted tape with different angles and under constant heat flux with copper nanofluid and evaluation of the results obtained using perceptron artificial neural networks

References

• A. R. Al-Obaidi and A. Sharif, “Investigation of the three-dimensional structure, pressure drop, and heat transfer characteristics of the thermohydraulic flow in a circular pipe with different twisted-tape geometrical configurations,” J. Therm. Anal. Calorim., vol. 143, no. 5, pp. 3533–3558, 2021. DOI: https://doi.org/10.1007/s10973-019-09244-y.
   Web of Science ®Google Scholar
• B. B. Bora, M. Zeeshan, S. Nath, and D. Bhanja, “Numerical modelling and thermohydraulic analysis of circular pipe having internal vortex generators,” in Recent Advances in Mechanical Engineering. Singapore: Springer, 2021, pp. 487–498.
   Google Scholar
• V. Fuskele and R. M. Sarviya, “Heat transfer enhancement in a circular tube fitted with twisted tape having continuous cut edges using CuO-water nanofluid,” in Green Buildings and Sustainable Engineering. Singapore: Springer, 2019 pp. 367–383.
   Google Scholar
• N. Ghasemi, R. Aghayari, and H. Maddah, “Optimizing the parameters of heat transmission in a small heat exchanger with spiral tapes cut as triangles and aluminum oxide nanofluid using central composite design method,” Heat Mass Transf., vol. 54, no. 7, pp. 2113–2130, 2018. DOI: https://doi.org/10.1007/s00231-018-2292-8.
   Google Scholar
• P. Negi, V. K. Gupta, A. K. Prasad, and I. Ahmad, “CFD Analysis to Increase Heat Transfer in Pipe with Combined Effect of Circular Perforated Ring and Twisted Tape Insert,” In Intelligent Manufacturing and Energy Sustainability. Singapore: Springer, 2020, pp. 261–269.
   Google Scholar
• M. Noorbakhsh, S. S. M. Ajarostaghi, M. Zaboli, and B. Kiani, “Thermal analysis of nanofluids flow in a double pipe heat exchanger with twisted tapes insert in both sides,” J. Therm. Anal. Calorim., vol. 147, pp. 3965–3976, 2022. DOI: https://doi.org/10.1007/s10973-021-10738-x.
   Google Scholar
• M. Outokesh, S. S. M. Ajarostaghi, A. Bozorgzadeh, and K. Sedighi, “Numerical evaluation of the effect of utilizing twisted tape with curved profile as a turbulator on heat transfer enhancement in a pipe,” J. Therm. Anal. Calorim., vol. 140, no. 3, pp. 1537–1553, 2020. DOI: https://doi.org/10.1007/s10973-020-09336-0.
   Google Scholar
• S. M. Alempour, A. A. A. Arani, and M. M. Najafizadeh, “Twisted tape variable wavelength effect on nanofluid flow and heat transfer inside elliptical shape tube,” Eur. Phys. J. Plus, vol. 136, no. 2, pp. 1–24, 2021. DOI: https://doi.org/10.1140/epjp/s13360-021-01124-5.
   Google Scholar
• A. R. Al Obaidi, “Analysis of the flow field, thermal performance, and heat transfer augmentation in circular tube using different dimple geometrical configurations with internal twisted tape insert,” Heat Transf., vol. 49, no. 8, pp. 4153–4172, 2020.
   Google Scholar
• N. Ghasemi, H. Maddah, M. Mohebbi, R. Aghayari, and S. Rohani, “Proposing a method for combining monitored multilayered perceptron (MLP) and self-organizing map (SOM) neural networks in prediction of heat transfer parameters in a double pipe heat exchanger with nanofluid,” Heat Mass Transf., vol. 55, no. 8, pp. 2261–2276, 2019. DOI: https://doi.org/10.1007/s00231-019-02576-3.
   Google Scholar
• S. K. Mahato, S. C. Rana, R. N. Barman, and S. Goswami, “Numerical analysis of heat transfer and fluid flow through the twisted square duct (TSD): nanofluid as working fluid,” J. Mech. Sci. Technol., vol. 33, no. 11, pp. 5507–5514, 2019. DOI: https://doi.org/10.1007/s12206-019-1043-1.
   Web of Science ®Google Scholar
• B. Souayeh, S. Bhattacharyya, N. Hdhiri, and M. Waqas Alam, “Heat and fluid flow analysis and ANN-based prediction of a novel spring corrugated tape,” Sustainability, vol. 13, no. 6, pp. 3023, 2021. DOI: https://doi.org/10.3390/su13063023.
   Google Scholar
• R. J. Yadav, T. Mahajani, S. S. Kore, P. M. Gadhe, and D. A. Kamble, “Investigation of heat transfer characteristics using Fe3O4 nanofluid along with TT inserts in tube with uniform electromagnetic field,” Appl. Nanosci., pp. 1–23, 2021.
   Web of Science ®Google Scholar
• A. Zolghadri, H. Maddah, M. H. Ahmadi, and M. Sharifpur, “Predicting parameters of heat transfer in a shell and tube heat exchanger using aluminum oxide nanofluid with artificial neural network (ANN) and self-organizing map (SOM),” Sustainability, vol. 13, no. 16, pp. 8824, 2021. DOI: https://doi.org/10.3390/su13168824.
   Google Scholar
• A. M. Abed, H. S. Majdi, Z. Hussein, D. Fadhil, and A. Abdulkadhim, “Numerical analysis of flow and heat transfer enhancement in a horizontal pipe with P-TT and V-Cut twisted tape,” Case Studies Therm. Eng., vol. 12, pp. 749–758, 2018. DOI: https://doi.org/10.1016/j.csite.2018.10.004.
   Google Scholar
• A. S. Dalkılıç et al., “Single phase flow heat transfer characteristics of quad-channel twisted tape inserts in tubes,” Int. Commun. Heat Mass Transf., vol. 118, pp. 104835, 2020. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2020.104835.
   Google Scholar
• K. L. Liaw, J. C. Kurnia, and A. P. Sasmito, “Turbulent convective heat transfer in helical tube with twisted tape insert,” Int. J. Heat Mass Transf., vol. 169, pp. 120918, 2021. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2021.120918.
   Web of Science ®Google Scholar
• K. S. Mushatet, Q. A. Rishak, and M. H. Fagr, “Experimental and numerical investigation of swirling turbulent flow and heat transfer due to insertion of twisted tapes of new models in a heated tube,” Appl. Therm. Eng., vol. 171, pp. 115070, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115070.
   Web of Science ®Google Scholar
• S. Saadah Ahmad, S. Abdullah, and K. Sopian, “The effect of linearly increasing/decreasing pitch ratio twisted tape with various progression rate and nanofluid towards the system performance,” Therm. Sci. Eng. Prog., vol. 25, pp. 100979, 2021.
   Google Scholar
• S. Khanmohammadi and N. Mazaheri, “Second law analysis and multi-criteria optimization of turbulent heat transfer in a tube with inserted single and double twisted tape,” Int. J. Therm. Sci., vol. 145, pp. 105998, 2019. DOI: https://doi.org/10.1016/j.ijthermalsci.2019.105998.
   Google Scholar
• T. Dagdevir and V. Ozceyhan, “An experimental study on heat transfer enhancement and flow characteristics of a tube with plain, perforated and dimpled twisted tape inserts,” Int. J. Therm. Sci., vol. 159, pp. 106564, 2021. DOI: https://doi.org/10.1016/j.ijthermalsci.2020.106564.
   Web of Science ®Google Scholar
• S. R. Chaurasia and R. M. Sarviya, “Thermal performance analysis of CuO/water nanofluid flow in a pipe with single and double strip helical screw tape,” Appl. Therm. Eng., vol. 166, pp. 114631, 2020. DOI: https://doi.org/10.1016/j.applthermaleng.2019.114631.
   Web of Science ®Google Scholar
• R. Aghayari, H. Maddah, S. M. Pourkiaei, M. H. Ahmadi, L. Chen, and M. Ghazvini, “Theoretical and experimental studies of heat transfer in a double-pipe heat exchanger equipped with twisted tape and nanofluid,” Eur. Phys. J. Plus, vol. 135, no. 2, pp. 1–26, 2020a. DOI: https://doi.org/10.1140/epjp/s13360-020-00252-8.
   Web of Science ®Google Scholar
• M. Bahiraei, N. Mazaheri, and S. Hosseini, “Neural network modeling of thermo-hydraulic attributes and entropy generation of an ecofriendly nanofluid flow inside tubes equipped with novel rotary coaxial double-twisted tape,” Powder Technol., vol. 369, pp. 162–175, 2020. DOI: https://doi.org/10.1016/j.powtec.2020.05.014.
   Google Scholar
• H. Maddah, R. Aghayari, M. Mirzaee, M. H. Ahmadi, M. Sadeghzadeh, and A. J. Chamkha, “Factorial experimental design for the thermal performance of a double pipe heat exchanger using Al2O3–TiO2 hybrid nanofluid,” Int. Commun. Heat Mass Transf., vol. 97, pp. 92–102, 2018. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2018.07.002.
   Web of Science ®Google Scholar
• N. H. Abu-Hamdeh, K. H. Almitani, A. A. Gari, A. Alimoradi, A. Ahmadian, and D. Baleanu, “Hydrodynamic analysis of a heat exchanger with crosscut twisted tapes and filled with thermal oil-based SWCNT nanofluid: applying ANN for prediction of objective parameters,” J. Therm. Anal. Calorim., vol. 145, pp. 2163–2176, 2021. DOI: https://doi.org/10.1007/s10973-020-10521-4.
   Google Scholar
• S. Z. Heris, T. H. Nassan, S. H. Noie, H. Sardarabadi, and M. Sardarabadi, “Laminar convective heat transfer of Al2O3/water nanofluid through square cross-sectional duct,” Int. J. Heat Fluid Flow, vol. 44, pp. 375–382, 2013. DOI: https://doi.org/10.1016/j.ijheatfluidflow.2013.07.006.
   Web of Science ®Google Scholar
• R. Aghayari, S. Rohani, N. Ghasemi, E. N. K. Heiran, and H. Mazaheri, “Numerical investigation of heat transfer in a helically coiled tube using copper/water nano-fluid under constant heat flux and prediction of the results using perceptron and radial basis function networks,” Heat Mass Transf., vol. 56, no. 4, pp. 1051–1075, 2020b. DOI: https://doi.org/10.1007/s00231-019-02758-z.
   Google Scholar
• M. H. Fard, M. N. Esfahany, and M. R. Talaie, “Numerical study of convective heat transfer of nanofluids in a circular tube two-phase model versus single-phase model,” Int. Commun. Heat Mass Transf., vol. 37, no. 1, pp. 91–97, 2010. DOI: https://doi.org/10.1016/j.icheatmasstransfer.2009.08.003.
   Web of Science ®Google Scholar