Study on enhanced heat transfer performance of open-cell metal foams based on a hexahedron model

References

• Z. A. Qureshi, E. Elnajjar, O. Al-Ketan, R. A. Al-Rub and S. B. Al-Omari, “Heat transfer performance of a finned metal foam-phase change material (FMF-PCM) system incorporating triply periodic minimal surfaces (TPMS),” Int. J. Heat Mass Transf., vol. 170, pp. 121001, May. 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121001.
   Web of Science ®Google Scholar
• S. Krishnan, J. Y. Murthy and S. V. Garimella, “Direct simulation of transport in open-cell metal foams,” J. Heat Transf., vol. 128, no. 8, pp. 793–799, Aug. 2006. DOI: 10.1115/1.2227038.
   Web of Science ®Google Scholar
• A. Bhattacharya, V. V. Calmidi and R. L. Mahajan, “Thermophysical properties of high porosity metal foams,” J. Heat Mass Transf., vol. 45, no. 5, pp. 1017–1031, Feb. 2002. DOI: 10.1016/S0017-9310(01)00220-4.
   Web of Science ®Google Scholar
• K. Boomsma, D. Poulikakos and F. Zwick, “Metal foams as compact high performance heat exchangers,” Mech. Mater., vol. 35, no. 12, pp. 1161–1176, Dec. 2003. DOI: 10.1016/j.mechmat.2003.02.001.
   Web of Science ®Google Scholar
• K. Boomsma and D. Poulikakos, “The effects of compression and pore size variations on the liquid flow characteristics in metal foams,” J. Fluids Eng., vol. 124, no. 1, pp. 263–272, Mar. 2002. DOI: 10.1115/1.1429637.
   Web of Science ®Google Scholar
• A. F. Bastwros, Effectiveness of Open-pore Metallic Foams for High Power Electronic Cooling[R]. Anaheim, CA: Symposium on the Thermal Management of Electronics, 1998.
   Google Scholar
• M. Simone, Z. Claudio, C. AIbcrto, et al., “Pressure drop during air flow in aluminum foams,” Int. J. Heat Mass Transf., vol. 53, pp. 3121–3130, Jul. 2010. DOI: 10.1016/j.ijheatmasstransfer.2010.03.015.
   Web of Science ®Google Scholar
• I. Ghosh, “How good is open-pore metal foam as heat transfer surface,” J. Heat Transf., vol. 131, no. 10, pp. 1–8, Oct. 2009. DOI: 10.1115/1.3160537.
   Web of Science ®Google Scholar
• K. I. Salas and A. M. Waas, “Convective heat transfer in open- pore metal foams,” J. Heat Transf., vol. 129, no. 9, pp. 1217–1229, Sep. 2007. DOI: 10.1115/1.2739598.
   Web of Science ®Google Scholar
• W. H. Hsieh, J. Y. Wu, W. H. Shih and W. C. Chiu, “Experimental investigation of heat transfer characteristics of aluminum-foam heat sink,” J. Heat Mass Transf., vol. 47, no. 23, pp. 5149–5157, Nov. 2004. DOI: 10.1016/j.ijheatmasstransfer.2004.04.037.
   Web of Science ®Google Scholar
• S. Alfarawi, R. Al-Dadah and S. Mahmoud, “Transient investigation of mini-channel regenerative heat exchangers: combined experimental and CFD approach,” Appl. Therm. Eng., vol. 125, pp. 346–358, Oct. 2017. DOI: 10.1016/j.applthermaleng.2017.07.038.
   Web of Science ®Google Scholar
• H.-X. Wang, G.-Y. Zhou, X. Luo, S. Kabelac and S.-T. Tu, “The single-blow transient test technique using pulse change inlet condition with optimized pulse width and matching time,” Heat Mass Transf., vol. 56, no. 3, pp. 963–972, Mar. 2020. DOI: 10.1007/s00231-019-02745-4.
   Web of Science ®Google Scholar
• W. Thomson, “On the division of space with minimum partitional area,” Phil. Mag., vol. 24, no. 151, pp. 503–A514, 1887. DOI: 10.1080/14786448708628135.
   Google Scholar
• K. Boomsma and D. Poulikakos, “On the effective thermal conductivity of a three dimensionally structured fluid-saturated metal foam,” Int. J. Heat Mass Transf., vol. 44, no. 4, pp. 827–836, Jan. 2001. DOI: 10.1016/S0017-9310(00)00123-X.
   Web of Science ®Google Scholar
• D. Weaire and R. Phelan, “A counter-example to Kelvin’s conjecture on minimal surfaces,” Philos. Mag. Lett., vol. 69, no. 2, pp. 107–110, Feb. 1994. DOI: 10.1080/09500839408241577.
   Web of Science ®Google Scholar
• S. Cunsolo, M. Iasiello, M. Oliviero, N. Bianco, Chiu, W. K. S. and Naso V., “Lord Kelvin and Weaire–Phelan foam models: Heat transfer and pressure drop,” J. Heat Transf., vol. 138, no. 2, pp. 022601, Feb. 2016. DOI: 10.1115/1.4031700.
   Web of Science ®Google Scholar
• T. J. Lu, L. Valdevit and A. G. Evans, “Active cooling by metallic sandwich structures with periodic cores,” Prog. Mater. Sci., vol. 50, no. 7, pp. 789–815, Sep. 2005. DOI: 10.1016/j.pmatsci.2005.03.001.
   Web of Science ®Google Scholar
• Du Plessis Prieur, M. Agnes, C. Jacques and L. Jack, “Pressure drop prediction for flow through high porosity metallic foams,” Chem. Eng. Sci., vol. 49, no. 21, pp. 3545–3553, May. 1994. DOI: 10.1016/0009-2509(94)00170-7.
   Web of Science ®Google Scholar
• V. V. Calmidi and R. L. Mahajan, “The effective thermal conductivity of high porosity fibrous metal foams,” J. Heat Transfer, vol. 121, no. 2, pp. 466–471, May 1999. DOI: 10.1115/1.2826001.
   Web of Science ®Google Scholar
• N. Dukhan, P. D. Quiñones-Ramos, E. Cruz-Ruiz, M. Vélez-Reyes and E. P. Scott, “One-dimensional heat transfer analysis in open-cell 10-ppi metal foam,” Heat Mass Transf., vol. 48, no. 25–26, pp. 5112–5120, Dec. 2005. DOI: 10.1016/j.ijheatmasstransfer.2005.07.012.
   Web of Science ®Google Scholar
• P. X. Jiang and X. C. Lu, “Numerical simulation and theoretical analysis of thermal boundary characteristics of convection heat transfer in porous media,” Int. J. Heat Fluid Flow, vol. 28, no. 5, pp. 1144–1156, Oct. 2007. DOI: 10.1016/j.ijheatfluidflow.2006.11.009.
   Web of Science ®Google Scholar
• C. Moon, H. D. Kim and K. C. Kim, “Kelvin-cell-based metal foam heat exchanger with elliptical struts for low energy consumption,” Appl. Therm. Eng., vol. 144, pp. 540–550, Nov. 2018. DOI: 10.1016/j.applthermaleng.2018.07.110.
   Web of Science ®Google Scholar
• S. Ali, K. Nader and H. Graeme, “On the influences of surface heat release and thermal radiation upon transport in catalytic porous microreactors-A novel porous-solid interface model,” Chem. Eng. Proc., vol. 143, pp. 107602, Sep. 2019. DOI: 10.1016/j.cep.2019.107602.
   Web of Science ®Google Scholar
• S. T. W. Kuruneru, S. C. Saha, E. Sauret and Y. T. Gu, “Transient heat transfer and non-isothermal particle-laden gas flows through porous metal foams of differing structure,” Appl. Therm. Eng., vol. 150, pp. 888–903, Mar. 2019. DOI: 10.1016/j.applthermaleng.2019.01.041.
   Web of Science ®Google Scholar
• C. XU, Y. Guang and P. Sandeep, “Direct numerical simulation of convective heat transfer in porous media,” Int. J. Heat Mass. Transf., vol. 133, pp. 11–20, Apr. 2019. DOI: 10.1016/j.ijheatmasstransfer.2018.11.172.
   Web of Science ®Google Scholar
• Y. Mahmoudi, N. Karimi and K. Mazaheri, “Analytical investigation of heat transfer enhancement in a channel partially filled with a porous material under local thermal non-equilibrium condition,” Int. J. Ther Sci., vol. 50, no. 12, pp. 2386–2401, Dec. 2011. DOI: 10.1016/j.ijthermalsci.2011.07.008.
   Web of Science ®Google Scholar
• K. Inderjot and S. Prashant, “Numerical investigation on conjugate heat transfer in octet-shape-based single unit cell thick metal foam,” Int. Commun. Heat Mass Transf., vol. 121, pp. 105090, Feb. 2021. DOI: 10.1016/j.icheatmasstransfer.2020.105090.
   Web of Science ®Google Scholar
• S. CROSNIER, R. RIVA, B. Bador, et al., “Modelling of gas flow through metallic foams presented[C],” presented at the Eur. Hydrogen Energy Conf., France, Sep. 2003, pp. 1375.
   Google Scholar
• W. Q. Tao, Numerical Heat Transfer, 2nd ed. Xi’an, China: Xi’an Jiaotong University Press, 2001.
   Google Scholar
• Y. Q. Sun, J. X. Liu and X. Y. Yang, “Volume of the solid common to three vertically intersected cylinders,” Studys in College Mathematics., vol. 16, no. 1, pp. 49–52, 2013. (in Chinese).
   Google Scholar
• K. Stephan, “Wärmeübertragung und Druckabfall bei nicht ausgebildeter Laminarströmung in Rohren und in ebenen Spalten,” Chem. Ing. Tech., vol. 31, no. 12, pp. 773–778, Dec. 1959. DOI: 10.1002/cite.330311204.
   Google Scholar
• J. M. Gong, J. Onishi, A. He, Y. Kametani, Y. Hasegawa and N. Shikazono, “Heat transfer enhancement and pressure loss in a plate-fin heat exchanger with V-shaped oblique wavy surface,” Int. J. Heat Mass Transf., vol. 161, pp.120263, Nov. 2020. DOI: 10.1016/j.icheatmasstransfer.2020.105090.
   PubMed Web of Science ®Google Scholar