Effect of circular perforated pin fin on heat transfer and fluid flow characteristics of rectangular microchannel heat sink

References

• M. A. Ebadian and C. X. Lin, “A review of high-heat-flux heat removal technologies,” J. Heat Transfer, vol. 133, no. 11, pp. 1–11, 2011. DOI: 10.1115/1.4004340.
   Web of Science ®Google Scholar
• D. B. Tuckerman and R. F. W. Pease,“High-Performance Heat Sinking for VLSI,” IEEE Electron. Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: 10.1177/0164027595174002.
   Web of Science ®Google Scholar
• W. Qu and I. Mudawar, “Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink,” Int. J. Heat Mass Transf., vol. 45, no. 12, pp. 2549–2565, 2002. DOI: 10.1016/S0017-9310(01)00337-4.
   Web of Science ®Google Scholar
• E. G. Colgan, et al., “Han, et al. [31] used circular jet nozzles with interspaced drainage trenches to achieve a very high heat transfer coefficient (20.0 W/cm2K) with a moderate pressure drop (28 kPa),” IEEE Trans. Comp. Packag. Technol., vol. 30, no. 2, pp. 218–225, 2007. DOI: 10.1109/TCAPT.2007.897977..
   Google Scholar
• J. Zhao, S. Huang, L. Gong and Z. Huang, “Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling,” Appl. Therm. Eng., vol. 93, pp. 1347–1359, 2016. DOI: 10.1016/j.applthermaleng.2015.08.105.
   Web of Science ®Google Scholar
• Y. Sui, P. S. Lee and C. J. Teo, “An experimental study of flow friction and heat transfer in wavy microchannels with rectangular cross section,” Int. J. Therm. Sci, vol. 50, no. 12, pp. 2473–2482, 2011. DOI: 10.1016/j.ijthermalsci.2011.06.017.
   Web of Science ®Google Scholar
• Y. Yan, H. Yan, S. Feng and L. Li, “Thermal-hydraulic performances and synergy effect between heat and flow distribution in a truncated doubled-layered heat sink with Y-shaped fractal network,” Int. J. Heat Mass Transf., vol. 142, pp. 118337. 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.06.093.
   Web of Science ®Google Scholar
• D. Jing and X. Zhan, “Cross-sectional dimension dependence of electroosmotic flow in fractal treelike rectangular microchannel network,” Micromachines., vol. 11, no. 3, pp. 266, 2020. DOI: 10.3390/mi11030266.
   PubMed Web of Science ®Google Scholar
• D. Jing and L. He, “Numerical studies on the hydraulic and thermal performances of microchannels with different cross-sectional shapes,” Int. J. Heat Mass Transf., vol. 143, pp. 118604, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.118604.
   Web of Science ®Google Scholar
• W. T. Yan, C. Li and W. B. Ye, “Numerical investigation of hydrodynamic and heat transfer performances of nanofluids in a fractal microchannel heat sink,” Heat Trans. Asian Res., vol. 48, no. 6, pp. 2329–2349, 2019. DOI: 10.1002/htj.21494.
   Web of Science ®Google Scholar
• Z. Lyu, F. Pourfattah, A. A. A. Arani, A. Asadi and L. K. Foong, “On the thermal performance of a fractal microchannel subjected to water and kerosene carbon nanotube nanofluid,” Sci. Rep., vol. 10, no. 1, pp. 1–16, 2020. DOI: 10.1038/s41598-020-64142-w.
   Web of Science ®Google Scholar
• A. J. Shkarah, M. Yusoff, B. Sulaiman, R. Bin and H. Ayob, “Boiling two phase flow in microchannels: a review,” IJST, vol. 6, no. 11, pp. 1–5521, 2013. DOI: 10.17485/ijst/2013/v6i10/40414..
   Google Scholar
• S. V. Jadhav and P. M. Pawar, “Performance analysis of microchannel with different pin fin layouts,” Int. J. Numer. Model. Electron. Networks, Devices Fields, vol. 32, pp. 1–19, 2019. DOI: 10.1002/jnm.2697.
   Web of Science ®Google Scholar
• S. V. Jadhav, P. M. Pawar and B. P. Ronge, “Effect of pin-fin geometry on microchannel performance,” Chem. Prod. Process Model., vol. 14, no. 1, pp. 20180016, 2019. DOI: 10.1515/cppm-2018-0016.
   Web of Science ®Google Scholar
• V. R. Kumar, K. Balasubramanian, K. K. Kumar, K. Bhatia and N. Tiwari, “Numerical investigation of heat transfer and fluid flow characteristics in circular wavy microchannel with tangentially branched secondary channels,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., vol. 233, no. 6, pp. 1304–1316, 2019. DOI: 10.1177/0954408919869543.
   Web of Science ®Google Scholar
• P. Bhandari and Y. K. Prajapati, “Thermal performance of open microchannel heat sink with variable pin fin height,” Int. J. Therm. Sci., vol. 159, pp. 106609, 2021. DOI: 10.1016/j.ijthermalsci.2020.106609.
   Web of Science ®Google Scholar
• H. Xie, B. Yang, S. Zhang and M. Song, “Research on the mechanism of heat transfer enhancement in microchannel heat sinks with micropin fins,” Int. J. Energy Res., vol. 44, no. 4, pp. 3049–3065, 2020. DOI: 10.1002/er.5135.
   Web of Science ®Google Scholar
• K. M. Jung, A. Krishnan R, U. Kumar G and H. J. Lee, “Experimental study on two-phase pressure drop and flow boiling heat transfer in a micro pin fin channel heat sink under constant heat flux,” Exp. Heat Transf., vol. 34, no. 2, pp. 162–185, 2021. DOI: 10.1080/08916152.2020.1725182.
   Web of Science ®Google Scholar
• H. Tabkhi, A. Nayebzadeh and Y. Peles, “Experimental and numerical local heat transfer study on micro pin fin with tip clearance,” Appl. Therm. Eng., vol. 179, pp. 115756, 2020. DOI: 10.1016/j.applthermaleng.2020.115756.
   Web of Science ®Google Scholar
• M. O. Qidwai, M. M. Hasan, N. Z. Khan and U. Khan, “Optimization of heat transfer effects in radial fin microchannel heat sink,” Energy Source. Part A Recover. Util. Environ. Eff., pp. 1–13, Dec. 2019. DOI: 10.1080/15567036.2019.1704947.
   Web of Science ®Google Scholar
• M. O. Qidwai, M. M. Hasan, N. Z. Khan and M. Ariz, “Performance evaluation of simple radial fin design for single phase liquid flow in microchannel heat sink,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng, p., vol. 235, pp. 095440892094426, Jul 2020. DOI: 10.1177/0954408920944269.
   Google Scholar
• Y. K. Prajapati, “Influence of fin height on heat transfer and fluid flow characteristics of rectangular microchannel heat sink,” Int. J. Heat Mass Transf, vol. 137, pp. 1041–1052, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.04.012.
   Web of Science ®Google Scholar
• T. Coşkun and E. Çetkin, “Heat Transfer Enhancement in a Microchannel Heat Sink: Nanofluids and/or Micro Pin Fins,” Heat Transf. Eng, vol. 41, no. 21, pp. 1818–1828, 2020. DOI: 10.1080/01457632.2019.1670467.
   Web of Science ®Google Scholar
• S. T. Kadam, R. Kumar and R. Abiev, “Performance augmentation of single-phase heat transfer in open-type microchannel heat sink,” J. Thermophys. Heat Transf., vol. 33, no. 2, pp. 416–424, 2019. DOI: 10.2514/1.T5522.
   Web of Science ®Google Scholar
• M. O. Qidwai and M. M. Hasan, “Effect of variation of cylindrical pin fins height on the overall performance of microchannel heat sink,” Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., vol. 233, no. 5, pp. 980–990, 2019. DOI: 10.1177/0954408918821777.
   Web of Science ®Google Scholar
• X. Wang, M. Chen, D. Tate, H. Rahimi and S. Zhang, “Numerical investigation on hydraulic and thermal characteristics of micro latticed pin fin in the heat sink,” Int. J. Heat Mass Transf., vol. 149, pp. 119157, Mar. 2020. DOI: 10.1016/j.ijheatmasstransfer.2019.119157.
   Web of Science ®Google Scholar
• A. Rajalingam and S. Chakraborty, “Effect of micro-structures in a microchannel heat sink – A comprehensive study,” Int. J. Heat Mass Transf, vol. 154, pp. 119617, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119617.
   Web of Science ®Google Scholar
• K. Kant and R. Pitchumani, “Laminar drag reduction in microchannels with liquid infused textured surfaces,” Chem. Eng. Sci., vol. 230, pp. 116196, 2021. DOI: 10.1016/j.ces.2020.116196.
   Web of Science ®Google Scholar
• J. Zhao, Y. Wang, G. Ding, Y. Sun and G. Wang, “Design, fabrication and measurement of a microchannel heat sink with a pin-fin array and optimal inlet position for alleviating the hot spot effect,” J. Micromech. Microeng., vol. 24, no. 11, pp. 115013, 2014. DOI: 10.1088/0960-1317/24/11/115013.
   Web of Science ®Google Scholar
• K. K. Ferster, K. L. Kirsch and K. A. Thole, “Effects of geometry, spacing, and number of pin fins in additively manufactured microchannel pin fin arrays,” J. Turbomach., vol. 140, no. 1, pp. 1–10, 2018. DOI: 10.1115/1.4038179.
   Web of Science ®Google Scholar
• Y. Jia, G. Xia, Y. Li, D. Ma and B. Cai, “Heat transfer and fluid flow characteristics of combined microchannel with cone-shaped micro pin fins,” Int. Commun. Heat Mass Transf., vol. 92, pp. 78–89, 2018. DOI: 10.1016/j.icheatmasstransfer.2017.11.004.
   Web of Science ®Google Scholar
• S. M. Hassani, M. Khoshvaght-Aliabadi, S. H. Mazloumi, S. Rehman and A. Alimoradi, “Improving thermal performance of microchannels by combining rectangular pin with chamber,” Appl. Therm. Eng., vol. 186, pp. 116373, 2021. DOI: 10.1016/j.applthermaleng.2020.116373.
   Web of Science ®Google Scholar
• G. F. Xie, L. Zhao, Y. Y. Dong, Y. G. Li, S. L. Zhang and C. Yang, “Hydraulic and thermal performance of microchannel heat sink inserted with pin fins,” Micromachines, vol. 12, no. 3, pp. 245–15, 2021. DOI: 10.3390/mi12030245.
   PubMed Web of Science ®Google Scholar
• Y. Lin, Y. Luo, W. Li, Y. Cao, Z. Tao and T. I. P. Shih, “Single-phase and two-phase flow and heat transfer in microchannel heat sink with various manifold arrangements,” Int. J. Heat Mass Transf., vol. 171, pp. 121118, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121118.
   Web of Science ®Google Scholar
• Z. Feng, Z. Hu, Y. Lan, Z. Huang and J. Zhang, “Effects of geometric parameters of circular pin-fins on fluid flow and heat transfer in an interrupted microchannel heat sink,” Int. J. Therm. Sci., vol. 165, pp. 106956, Jul. 2021. DOI: 10.1016/j.ijthermalsci.2021.106956.
   Web of Science ®Google Scholar
• L. Zeng, D. Deng, N. Zhong and G. Zheng, “Thermal and flow performance in microchannel heat sink with open-ring pin fins,” Int. J. Mech. Sci., vol. 200, pp. 106445, 2021. DOI: 10.1016/j.ijmecsci.2021.106445.
   Web of Science ®Google Scholar
• M. N. Khan and M. N. Karimi, “Analysis of heat transfer enhancement in microchannel by varying the height of pin fins at upstream and downstream region,” J. Process Mech. Eng., vol. 235, pp. 758–767, 2021. DOI: 10.1177/0954408921992975.
   Web of Science ®Google Scholar
• J. Wang, K. Yu, M. Ye, E. Wang, W. Wang and B. Sundén, “Effects of pin fins and vortex generators on thermal performance in a microchannel with Al2O3 nanofluids,” Energy, vol. 239, pp. 122606, 2022. DOI: 10.1016/j.energy.2021.122606.
   Web of Science ®Google Scholar