Theoretical modeling and verification of storage time of cold box based on network method of radiation heat transfer

References

• X. Xu, X. Zhang, and S. Liu, “Experimental study on cold storage box with nanocomposite phase change material and vacuum insulation panel,” Int. J. Energy Res., vol. 42, no. 14, pp. 4429–4438, 2018. DOI: 10.1002/er.4187.
   Web of Science ®Google Scholar
• A. Ashok, M. Brison, and Y. Letallec, “Improving cold chain systems: Challenges and solutions,” Vaccine, vol. 35, no. 17, pp. 2217–2223, 2017. DOI: 10.1016/j.vaccine.2016.08.045.
   PubMed Web of Science ®Google Scholar
• X. Zhang, “Modelling of the thermal conductivity in cold chain logistics based on micro-PCMs,” IJHT, vol. 36, no. 3, pp. 1075–1080, 2018. DOI: 10.18280/ijht.360339.
   Google Scholar
• Y. Zhao, X. Zhang, X. Xu, and S. Zhang, “Development of composite phase change cold storage material and its application in vaccine cold storage equipment,” J. Energy Storage, vol. 30, no. 2020, pp. 101455–101466, 2020. DOI: 10.1016/j.est.2020.101455.
   Google Scholar
• Y. Song et al., “Experimental and numerical investigation on dodecane/expanded graphite shape-stabilized phase change material for cold energy storage,” Energy, vol. 189, no. 2019, pp. 116175–116182, 2019. DOI: 10.1016/j.energy.2019.116175.
   Google Scholar
• B. Bai, K. Zhao, and X. Li, “Application research of nano-storage materials in cold chain logistics of e-commerce fresh agricultural products,” Res. Phys., vol. 13, no. 2019, pp. 102049–102056, 2019. DOI: 10.1016/j.rinp.2019.01.083.
   Google Scholar
• P. Jia, W. Wu, and Y. Wang, “Preparation of 0 °C phase change material and its cold storage performance in cold-chain logistics,” Chem. Ind. Eng. Prog., vol. 38, no. 6, pp. 2862–2869, 2019. DOI: 10.16085/j.issn.1000-6613.2018-1611.
   Google Scholar
• M. Ryms and W. M. Lewandowski, “Evaluating the influence of radiative heat flux on convective heat transfer from a vertical plate in air using an improved heating plate,” Int. J. Heat Mass Transf., vol. 173, pp. 121232–121247, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121232.
   Web of Science ®Google Scholar
• J. Du et al., “Cooling performance of a thermal energy storage-based portable box for cold chain applications,” J. Energy Storage, vol. 28, no. 2020, pp. 101238–101247, 2020. DOI: 10.1016/j.est.2020.101238.
   Google Scholar
• J. Zhao et al., “Recyclable low-temperature phase change microcapsules for cold storage,” J. Colloid Interface Sci., vol. 564, no. 2020, pp. 286–295, 2020. DOI: 10.1016/j.jcis.2019.12.037.
   PubMedGoogle Scholar
• D. Wang et al., “Investigation on the storage effect and nutritional quality of peach in cold storage containers transportation with different insulation materials,” Food Sci. Technol., vol. 43, no. 2, pp. 58–63, 2018. DOI: 10.13684/j.cnki.spkj.2018.02.011.
   Google Scholar
• T. Wu et al., “Preparation of a low-temperature nanofluid phase change material: MgCl2–H2O eutectic salt solution system with multi-walled carbon nanotubes (MWCNTs),” Int. J. Refrig., vol. 113, no. 2020, pp. 136–144, 2020. DOI: 10.1016/j.ijrefrig.2020.02.008.
   Google Scholar
• H. Tan, N. Wen, and Z. Ding, “Numerical study on heat and mass transfer characteristics in a randomly packed air cooling tower for large-scale air separation systems,” Int. J. Heat Mass Transf., vol. 178, no. 2021, pp. 121556–121567, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121556.
   Google Scholar
• X. Xiaofeng and Z. Xuelai, “Simulation and experimental investigation of a multi-temperature insulation box with phase change materials for cold storage,” J. Food Eng., vol. 292, no. 2021, pp. 110286–110294, 2021. DOI: 10.1016/j.jfoodeng.2020.110286.
   Google Scholar
• A. Sharma, M. Trivedi, K. Agarwal, and N. Nirmalkar, “Thermal energy storage in a confined cylindrical heat source filled with phase change materials,” Int. J. Heat Mass Transf., vol. 178, no. 2021, pp. 121603–121616, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121603.
   Google Scholar
• J.-C. Paquette, S. Mercier, B. Marcos, and S. Morasse, “Modeling the thermal performance of a multilayer box for the transportation of perishable food,” Food Bioprod. Process., vol. 105, no. 2017, pp. 77–85, 2017. DOI: 10.1016/j.fbp.2017.06.002.
   Google Scholar
• M. A. Khan et al., “Experimentally-Benchmarked kinetic simulations of heat transfer through rarefied gas with constant heat flux at the boundary,” Int. J. Heat Mass Transf., vol. 176, pp. 121378, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121378.
   Web of Science ®Google Scholar
• H. Shen et al., “3D numerical investigation of the heat and flow transfer through cold protective clothing based on CFD,” Int. J. Heat Mass Transf., vol. 175, pp. 121305, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121305.
   Web of Science ®Google Scholar
• F. P. Incropera, D. P. Dewitt, T. L. Bergman, and A. S. Lavine, Fundamentals of Heat and Mass Transfer, 6th ed. New York: Wiley, 2014.
   Google Scholar
• A. Ambaw et al., “The use of CFD to characterize and design post-harvest storage facilities: Past, present and future,” Comput. Electron. Agric., vol. 93, no. 2013, pp. 184–194, 2013. DOI: 10.1016/j.compag.2012.05.009.
   Google Scholar
• L. Zhang et al., “Wall thickness of incubator at ambient temperature and material thermal conductivity,” Packag. Eng., vol. 41, no. 5, pp. 97–102, 2020. DOI: 10.19554/j.cnki.1001-3563.2020.05.013.
   Google Scholar
• H. Zhao et al., “Temperature field simulation method of XPS incubator based on Fluent,” Packag. Eng., vol. 39, no. 19, pp. 105–109, 2018. DOI: 10.19554/j.cnki.1001-3563.2018.19.019.
   Google Scholar
• V. K. Mishra and S. Chaudhuri, “Implementation of stochastic optimization method-assisted radial basis neural network for transport phenomenon in non-newtonian third-grade fluids: Assessment of five optimization tools,” Arab. J. Sci. Eng., vol. 46, no. 12, pp. 11797–11818, 2021. DOI: 10.1007/s13369-021-05702-8.
   Web of Science ®Google Scholar
• K. Anand, A. Bhardwaj, S. Chaudhuri, and V. K. Mishra, “Self-organizing map network for the decision making in combined mode conduction-radiation heat transfer in porous medium,” Arab. J. Sci. Eng., vol. 47, no. 12, pp. 15175–15194, 2022. DOI: 10.1007/s13369-021-06489-4.
   Web of Science ®Google Scholar
• F. Yu, Y. Li, and Y. Zhu, “Numerical and experimental investigation on the thermal insulation performance of low temperature cold box,” Int. Commun. Heat Mass Transf., vol. 36, no. 9, pp. 908–911, 2009. DOI: 10.1016/j.icheatmasstransfer.2009.05.008.
   Web of Science ®Google Scholar
• J. Wu and L. Zhang, “Modeling and simulation of an insulated box based on COMSOL and temperature field analysis,” Bull. Sci. Technol., vol. 34, no. 08, pp. 84–89 + 94, 2018. DOI: 10.13774/j.cnki.kjtb.2018.08.016.
   Google Scholar
• A. K. Ray, S. Singh, D. Rakshit, and Udayraj, “Comparative study of cooling performance for portable cold storage box using phase change medium,” Therm. Sci. Eng. Prog., vol. 27, pp. 101146, 2022. DOI: 10.1016/j.tsep.2021.101146.
   Google Scholar
• M. Krishnani and D. N. Basu, “On the validity of Boussinesq approximation in transient simulation of single-phase natural circulation loops,” Int. J. Therm. Sci., vol. 105, pp. 224–232, 2016. DOI: 10.1016/j.ijthermalsci.2016.03.004.
   Web of Science ®Google Scholar
• W. Jiang, Q. Liu, and J. Qu, “Study on thermal conductivity of thermal insulation materials under natural climate simulation,” Green Environ. Prot. Build. Mater., vol. 09, pp. 1–2, 2020. DOI: 10.16767/j.cnki.10-1213/tu.2020.09.001.
   Google Scholar
• J. Vadhera, A. Sura, G. Nandan, and G. Dwivedi, “Study of phase change materials and its domestic application,” Mater. Today: Proc., vol. 5, no. 2, pp. 3411–3417, 2018. DOI: 10.1016/j.matpr.2017.11.586.
   Google Scholar
• X. Pan, D. Wang, and H. Zhu, “Study on temperature field of different materials in incubator,” Food Mach., vol. 34, no. 8, pp. 115–118, 2018. DOI: 10.13652/j.issn.1003-5788.2018.08.023.
   Google Scholar