Numerical analysis heat transfer enhancement in round corrugated channels using nano-fluids

References

• N. D. Khata, Z. K. Kadim, and K. A. Khalaf, “Numerical study of heat transfer enhancement in contour corrugated channel using water and engine oil,” CFD Lett., vol. 12, no. 12, pp. 17–37, Dec. 2020. DOI: 10.37934/cfdl.12.12.1737.
   Google Scholar
• G. Wang, Z. Zhang, R. Wang, and Z. Zhu, “A review on heat transfer of nanofluids by applied electric field or magnetic field,” Nanomaterials, vol. 10, no. 12, pp. 2386, Nov. 2020. DOI: 10.3390/nano10122386.
   Web of Science ®Google Scholar
• J. E. O’Brien and E. M. Sparrow, “Corrugated-duct heat transfer, pressure drop, and flow visualization,” J Heat Transf., vol. 104, no. 3, pp. 410–416, 1982. DOI: 10.1115/1.3245108.
   Web of Science ®Google Scholar
• Y. Asako and M. Faghri, “Finite-volume solutions for laminar flow and heat transfer in a corrugated duct,” J Heat Transf., vol. 109, no. 3, pp. 627–634, 1987. DOI: 10.1115/1.3248134.
   Web of Science ®Google Scholar
• G. Wang and S. P. Vanka, “Convective heat transfer in periodic wavy passages,” Int. J. Heat Mass Transf., vol. 38, no. 17, pp. 3219–3230, 1995. DOI: 10.1016/0017-9310(95)00051-a.
   Web of Science ®Google Scholar
• N. Tokgoz, M. M. Aksoy, and B. Sahin, “Investigation of flow characteristics and heat transfer enhancement of corrugated duct geometries,” Appl. Therm. Eng., vol. 118, pp. 518–530, May 2017. DOI: 10.1016/j.applthermaleng.2017.03.013.
   Web of Science ®Google Scholar
• H. Kazemi Moghadam, S. S. Mousavi Ajarostaghi, and S. Poncet, “Extensive numerical analysis of the thermal performance of a corrugated tube with coiled wire,” J. Therm. Anal. Calorim., vol. 140, no. 3, pp. 1469–1481, 2020. DOI: 10.1007/s10973-019-08876-4.
   Web of Science ®Google Scholar
• S. Mohammadi, S. S. Mousavi Ajarostaghi, and M. Pourfallah, “The latent heat recovery from boiler exhaust flue gas using shell and corrugated tube heat exchanger: a numerical study,” Heat Transf., vol. 49, no. 6, pp. 3797–3815, 2020. DOI: 10.1002/htj.21809.
   Google Scholar
• M. Sarkar, S. B. Paramane, and A. Sharma, “Periodically fully developed heat and fluid flow characteristics in a furrowed wavy channel,” Heat Transf. Eng., vol. 38, no. 2, pp. 278–288, 2017. DOI: 10.1080/01457632.2016.1177434.
   Web of Science ®Google Scholar
• S. Akbarzadeh and M. S. Valipour, “Experimental study on the heat transfer enhancement in helically corrugated tubes under the non-uniform heat flux,” J. Therm. Anal. Calorim., vol. 140, no. 3, pp. 1611–1623, 2020. DOI: 10.1007/s10973-020-09385-5.
   Web of Science ®Google Scholar
• M. Chandrasekar, S. Suresh, and A. C. Bose, “Experimental studies on heat transfer and friction factor characteristics of Al2O3/water nanofluid in a circular pipe under transition flow with wire coil inserts,” Heat Transf. Eng., vol. 32, no. 6, pp. 485–496, 2011. DOI: 10.1080/01457632.2010.506358.
   Web of Science ®Google Scholar
• H. Javadi, J. F. Urchueguia, S. S. Mousavi Ajarostaghi, and B. Badenes, “Numerical study on the thermal performance of a single U-tube borehole heat exchanger using nano-enhanced phase change materials,” Energies, vol. 13, no. 19, pp. 5156, 2020. DOI: 10.3390/en13195156.
   Web of Science ®Google Scholar
• M. Zaboli, S. S. M. Ajarostaghi, M. Noorbakhsh, and M. A. Delavar, “Effects of geometrical and operational parameters on heat transfer and fluid flow of three various water based nanofluids in a shell and coil tube heat exchanger,” SN Appl. Sci., vol. 1, no. 11, 2019. DOI: 10.1007/s42452-019-1431-2.
   Web of Science ®Google Scholar
• S. S. Mousavi Ajarostaghi, M. Shirzad, S. Rashidi, and L. K. B. Li, “Heat transfer performance of a nanofluid-filled tube with wall corrugations and center-cleared twisted-tape inserts,” Energy Sources A: Recov. Util. Environ. Eff., pp. 1–21, 2020. DOI: 10.1080/15567036.2020.1841860.
   Web of Science ®Google Scholar
• M. Noorbakhsh, S. S. M. Ajarostaghi, M. Zaboli, and B. Kiani, “Thermal analysis of nanofluids flow in a double pipe heat exchanger with twisted tapes insert in both sides,” J. Therm. Anal. Calorim., vol. 147, no. 5, pp. 3965–3976, 2022. DOI: 10.1007/s10973-021-10738-x.
   Web of Science ®Google Scholar
• M. Zaboli, S. Saedodin, S. S. Mousavi Ajarostaghi, and M. Nourbakhsh, “Numerical evaluation of the heat transfer in a shell and corrugated coil tube heat exchanger with three various water‐based nanofluids,” Heat Transf, vol. 50, no. 6, pp. 6043–6067, 2021. DOI: 10.1002/htj.22161.
   Google Scholar
• M. F. Nabil, W. H. Azmi, K. A. Hamid, and R. Mamat, “Heat transfer and friction factor of composite TiO2–SiO2 nanofluids in water-ethylene glycol (60:40) mixture,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 257, p. 012066, 2017. DOI: 10.1088/1757-899X/257/1/012066.
   Google Scholar
• A. A. Hussien, M. Z. Abdullah, N. M. Yusop, W. Al-Kouz, E. Mahmoudi, and M. Mehrali, “Heat transfer and entropy generation abilities of MWCNTs/GNPs hybrid nanofluids in microtubes,” Entropy (Basel), vol. 21, no. 5, pp. 480, May 2019. DOI: 10.3390/e21050480.
   PubMed Web of Science ®Google Scholar
• M. C. Returi, R. Konijeti, and A. Dasore, “Heat transfer enhancement using hybrid nanofluids in spiral plate heat exchangers,” Heat Transf. Asian Res., vol. 48, no. 7, pp. 3128–3143, 2019. DOI: 10.1002/htj.21534.
   Web of Science ®Google Scholar
• A. Bhattad, J. Sarkar, and P. Ghosh, “Hydrothermal performance of different alumina hybrid nanofluid types in plate heat exchanger,” J. Therm. Anal. Calorim., vol. 139, no. 6, pp. 3777–3787, 2020. DOI: 10.1007/s10973-019-08682-y.
   Web of Science ®Google Scholar
• H. A. Mohammed, P. Gunnasegaran, and N. H. Shuaib, “Numerical simulation of heat transfer enhancement in wavy microchannel heat sink,” Int. Commun. Heat Mass Transf., vol. 38, no. 1, pp. 63–68, Jan. 2011. DOI: 10.1016/j.icheatmasstransfer.2010.09.012.
   Web of Science ®Google Scholar
• M. A. Ahmed, M. Z. Yusoff, K. C. Ng, and N. H. Shuaib, “Effect of corrugation profile on the thermal–hydraulic performance of corrugated channels using CuO–water nanofluid,” Case Stud. Therm. Eng., vol. 4, pp. 65–75, Nov. 2014. DOI: 10.1016/j.csite.2014.07.001.
   Google Scholar
• A. M. Abed et al., “Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids,” Case Stud. Therm. Eng., vol. 5, pp. 13–23, Mar. 2015. DOI: 10.1016/j.csite.2014.11.001.
   Google Scholar
• M. A. Ahmed, M. Z. Yusoff, K. C. Ng, and N. H. Shuaib, “Numerical and experimental investigations on the heat transfer enhancement in corrugated channels using SiO2–water nanofluid,” Case Stud. Therm. Eng., vol. 6, pp. 77–92, Sep. 2015. DOI: 10.1016/j.csite.2015.07.003.
   Web of Science ®Google Scholar
• J. Rostami, A. Abbassi, and M. Saffar-Avval, “Optimization of conjugate heat transfer in wavy walls microchannels,” Appl. Therm. Eng., vol. 82, pp. 318–328, May 2015. DOI: 10.1016/j.applthermaleng.2015.02.069.
   Web of Science ®Google Scholar
• R. K. Ajeel, W. S. W. Salim, and K. Hasnan, “Numerical investigations of flow and heat transfer enhancement in a semicircle zigzag corrugated channel using nanofluids,” IJHT, vol. 36, no. 4, pp. 1292–1303, Dec. 2018. DOI: 10.18280/ijht.360418.
   Google Scholar
• E. A. M. Elshafei, M. M. Awad, E. El-Negiry, and A. G. Ali, “Heat transfer and pressure drop in corrugated channels,” Energy, vol. 35, no. 1, pp. 101–110, Jan. 2010. DOI: 10.1016/j.energy.2009.08.031.
   Web of Science ®Google Scholar
• R. K. Ajeel and W. S. I. W. Salim, “A CFD study on turbulent forced convection flow of Al2O3-water nanofluid in semi-circular corrugated channel,” IOP Conf. Ser.: Mater. Sci. Eng., vol. 243, p. 012020, Aug. 2017. DOI: 10.1088/1757-899X/243/1/012020.
   Google Scholar
• W. H. Azmi, K. V. Sharma, P. K. Sarma, R. Mamat, S. Anuar, and V. Dharma Rao, “Experimental determination of turbulent forced convection heat transfer and friction factor with SiO2 nanofluid,” Exp. Therm. Fluid Sci., vol. 51, pp. 103–111, Nov. 2013. DOI: 10.1016/j.expthermflusci.2013.07.006.
   Web of Science ®Google Scholar
• U. Akdag, S. Akcay, and D. Demiral, “Heat transfer enhancement with nanofluids under laminar pulsating flow in a trapezoidal-corrugated channel,” PCFD, vol. 17, no. 5, pp. 302, Aug. 2017. DOI: 10.1504/PCFD.2017.086322.
   Google Scholar
• O. Manca, S. Nardini, and D. Ricci, “A numerical study of nanofluid forced convection in ribbed channels,” Appl. Therm. Eng., vol. 37, pp. 280–292, May 2012. DOI: 10.1016/j.applthermaleng.2011.11.030.
   Web of Science ®Google Scholar
• S. R. Nfawa, A. R. A. Talib, S. U. Masuri, A. A. Basri, and H. Hasini, “Heat transfer enhancement in a corrugated-trapezoidal channel using winglet vortex generators,” CFD Lett., vol. 11, no. 10, pp. 69–80, Jan. 2021.
   Google Scholar
• R. Ajeel, W. S. I. Wan Salim, and K. Hasnan, “Heat transfer enhancement in semicircle corrugated channel: effect of geometrical parameters and nanofluid,” J. Adv. Res. Fluid Mech. Therm. Sci., vol. 53, pp. 82–94, Jan. 2019.
   Google Scholar
• C. M. Tun, A. G. Fane, J. T. Matheickal, and R. Sheikholeslami, “Membrane distillation crystallization of concentrated salts—flux and crystal formation,” J. Membr. Sci., vol. 257, no. 1-2, pp. 144–155, Jul. 2005. DOI: 10.1016/j.memsci.2004.09.051.
   Web of Science ®Google Scholar
• Z. Yin, F. Bao, C. Tu, Y. Hua, and R. Tian, “Numerical and experimental studies of heat and flow characteristics in a laminar pipe flow of nanofluid,” J. Exp. Nanosci., vol. 13, no. 1, pp. 82–94, Dec. 2018. DOI: 10.1080/17458080.2017.1413599.
   Web of Science ®Google Scholar