A numerical model for convective-condensation heat transfer of flue gas and its application on fin efficiency calculation

References

• P. Kapustenko, J. J. Klemes, O. Arsenyeva and L. Tovazhnyanskyy, “PHE (plate heat exchanger) for condensing duties: recent advances and future prospects,” Energies, vol. 16, no. 1, pp. 524, 2023. DOI: 10.3390/en16010524.
   Web of Science ®Google Scholar
• P. Raczka, “A pilot-scale condensing waste heat exchanger,” J. Power Technol., vol. 100, no. 3, pp. 263–271, 2020.
   Web of Science ®Google Scholar
• M. Kovacevic, et al., “Increasing the efficiency by retrofitting gas boilers into a condensing heat exchanger,” Energy Sources Part B., vol. 12, no. 5, pp. 470–479, 2017. DOI: 10.1080/15567249.2016.1188182.
   Google Scholar
• D. Che, Y. Da and Z. Zhuang, “Heat and mass transfer characteristics of simulated high moisture flue gases,” Heat Mass Transf., vol. 41, no. 3, pp. 250–256, 2004. DOI: 10.1007/s00231-004-0505-9.
   Web of Science ®Google Scholar
• A. P. Colburn and O. A. Hougen, “Design of cooler condensers for mixtures of vapors with noncondensing gases,” Ind. Eng. Chem., vol. 26, no. 11, pp. 1178–1182, 1934. DOI: 10.1021/ie50299a011.
   Google Scholar
• A. C. Bannwart and A. Bontemps, “Condensation of a vapor with incondensables - an improved gas-phase film model accounting for the effect of mass-transfer on film thickness,” Int. J. Heat Mass Transf., vol. 33, no. 7, pp. 1465–1474, 1990. DOI: 10.1016/0017-9310(90)90043-T.
   Web of Science ®Google Scholar
• H. J. H. Brouwers, “Film models for transport phenomena with fog formation: with application to plastic heat exchangers and condensers,” Ph.D. dissertation, Dept. Philos., Technical University, Eindhoven, Netherlands, 1990.
   Google Scholar
• H. J. H. Brouwers and A. K. Chesters, “Film models for transport phenomena with fog formation - the classical film model,” Int. J. Heat. Mass Transf., vol. 35, no. 1, pp. 1–11, 1992. DOI: 10.1016/0017-9310(92)90003-B.
   Web of Science ®Google Scholar
• H. J. H. Brouwers and C. W. M. VanderGeld, “Heat transfer, condensation and fog formation in crossflow plastic heat exchangers,” Int. J. Heat Mass Transf., vol. 39, no. 2, pp. 391–405, 1996. DOI: 10.1016/0017-9310(95)00113-N.
   Web of Science ®Google Scholar
• J. Sun, Y. He and W. Tao, “A molecular dynamics study on heat and mass transfer in condensation over smooth/rough surface,” Int. J. Numer. Methods Heat Fluid Flow., vol. 21, no. 2, pp. 244–267, 2011. DOI: 10.1108/09615531111105425.
   Web of Science ®Google Scholar
• A. M. Jacobi, S. A. Idem and V. W. Goldschmidt, “Predicting the performance of multistage heat-exchangers,” Heat Transf. Eng., vol. 14, no. 1, pp. 62–70, 1993. DOI: 10.1080/01457639308939795.
   Web of Science ®Google Scholar
• W. Yu, S. U. S. Choi, D. M. France and M. W. Wambsganss, “Single-sided steam condensing inside a rectangular horizontal channel,” Int. J. Heat Mass Transf., vol. 45, no. 18, pp. 3715–3724, 2002. DOI: 10.1016/S0017-9310(02)00087-X.
   Web of Science ®Google Scholar
• S. C. Seok, et al., “Effect of surface etching on condensing heat transfer,” J. Mech. Sci. Technol., vol. 30, no. 2, pp. 871–877, 2016. DOI: 10.1007/s12206-016-0141-6.
   Web of Science ®Google Scholar
• Y. Liang, D. Che and Y. Kang, “Effect of vapor condensation on forced convection heat transfer of moistened gas,” Heat Mass Transfer., vol. 43, no. 7, pp. 677–686, 2007. DOI: 10.1007/s00231-006-0148-0.
   Web of Science ®Google Scholar
• M. Mohanraj, S. Jayaraj and C. Muraleedharan, “Applications of artificial neural networks for thermal analysis of heat exchangers – a review,” Int. J. Therm. Sci., vol. 90, pp. 150–172, 2015. DOI: 10.1016/j.ijthermalsci.2014.11.030.
   Web of Science ®Google Scholar
• W. Cao and X. You, “The prediction of heat efficiency and pollutant emission of non-rated loaded condensing heat exchangers,” Clean Techn. Environ. Policy., vol. 20, no. 10, pp. 2299–2310, 2018. DOI: 10.1007/s10098-018-1606-3.
   Web of Science ®Google Scholar
• C. Wang and C. Tu, “Effects of non-condensable gas on laminar film condensation in a vertical tube,” Int. J. Heat Mass Transf., vol. 31, no. 11, pp. 2339–2345, 1988. DOI: 10.1016/0017-9310(88)90165-2.
   Web of Science ®Google Scholar
• G. Desrayaud and G. Lauriat, “Heat and mass transfer analogy for condensation of humid air in a vertical channel,” Heat Mass Transf., vol. 37, no. 1, pp. 67–76, 2001. DOI: 10.1007/s002310000133.
   Web of Science ®Google Scholar
• E. P. Volchkov, V. V. Terekhov and V. I. Terekhov, “A numerical study of boundary-layer heat and mass transfer in a forced flow of humid air with surface steam condensation,” Int. J. Heat Mass Transf., vol. 47, no. 6–7, pp. 1473–1481, 2004. DOI: 10.1016/j.ijheatmasstransfer.2003.09.018.
   Web of Science ®Google Scholar
• A. Chiapolino, P. Boivin and R. Saurel, “A simple phase transition relaxation solver for liquid-vapor flows,” Numer. Methods Fluids., vol. 83, no. 7, pp. 583–605, 2017. DOI: 10.1002/fld.4282.
   Web of Science ®Google Scholar
• X. Wu and D. Che, “A numerical study of high moisture flue gas in tube banks,” Numer. Heat Transf., Part A., vol. 65, no. 4, pp. 357–377, 2014. DOI: 10.1080/10407782.2013.831673.
   Web of Science ®Google Scholar
• Q. Liu, J. Yang, W. Qian, H. Gu and M. Liu, “Numerical study of the forced convective condensation on a short vertical plate,” Heat Transf. Eng., vol. 38, no. 1, pp. 103–121, 2017. DOI: 10.1080/01457632.2016.1156417.
   Web of Science ®Google Scholar
• R. Naik, A. Narain and S. Mitra, “Steady and unsteady simulations for annular internal condensing flows, part I: algorithm and its accuracy,” Numer. Heat Transf., Part B., vol. 69, no. 6, pp. 473–494, 2016. DOI: 10.1080/10407790.2016.1138802.
   Web of Science ®Google Scholar
• R. Naik and A. Narain, “Steady and unsteady simulations for annular internal condensing flows, part II: instability and flow regime transitions,” Numer. Heat Transf., Part B., vol. 69, no. 6, pp. 495–510, 2016. DOI: 10.1080/10407790.2016.1138804.
   Web of Science ®Google Scholar
• H. Nemati and M. Moradaghay, “Parametric study of natural convection over horizontal annular finned tube,” J. Cent. South Univ., vol. 26, no. 8, pp. 2077–2087, 2019. DOI: 10.1007/s11771-019-4155-y.
   Web of Science ®Google Scholar
• K. A. Gardner, “Efficiency of extended surface,” Trans. Am. Soc. Mech. Eng., vol. 67, no. 8, pp. 621–628, 1945. DOI: 10.1115/1.4018343.
   Google Scholar
• D. Y. Kuan, R. Aris and H. T. Davis, “Estimation of fin efficiencies of regular tubes arrayed in circumferential fins,” Int. J. Heat Mass Transf., vol. 27, no. 1, pp. 148–151, 1984. DOI: 10.1016/0017-9310(84)90249-7.
   Web of Science ®Google Scholar
• H. Zabronsky, “Temperature distribution and efficiency of a heat exchanger using square fins on round tubes,”J. Appl. Mech., vol. 22, no. 1, pp. 119–122, 1955. DOI: 10.1115/1.4010981.
   Google Scholar
• E. C. Rosman, P. Carajilescov and F. E. M. Saboya, “Performance of one- and two-row tube and plate fin heat exchangers,” J. Heat Transf., vol. 106, no. 3, pp. 627–632, 1984. DOI: 10.1115/1.3246726.
   Web of Science ®Google Scholar
• K. Song, Y. Wang, Q. Zhang, L. Wang and Y. Liu, “Numerical study of the fin efficiency and a modified fin efficiency formula for flat tube bank fin heat exchanger,” Int. J. Heat Mass Transf., vol. 54, no. 11–12, pp. 2661–2672, 2011. DOI: 10.1016/j.ijheatmasstransfer.2010.12.040.
   Web of Science ®Google Scholar
• B. Ameel, et al., “On fin efficiency in interrupted fin and tube heat exchangers,” Int. J. Heat Mass Transf., vol. 60, pp. 557–566, 2013. DOI: 10.1016/j.ijheatmasstransfer.2013.01.028.
   Web of Science ®Google Scholar
• M. H. Sharqawy, A. Moinuddin and S. M. Zubair, “Heat and mass transfer from annular fins of different cross-sectional area. Part I. Temperature distribution and fin efficiency,” Int. J. Refrig., vol. 35, no. 2, pp. 365–376, 2012. DOI: 10.1016/j.ijrefrig.2011.11.004.
   Web of Science ®Google Scholar
• A. Moinuddin, M. H. Sharqawy and S. M. Zubair, “Heat and mass transfer from annular fins of different cross sectional area. Part II. Optimal dimensions of fins,” Int. J. Refrig., vol. 35, no. 2, pp. 377–385, 2012. DOI: 10.1016/j.ijrefrig.2011.11.003.
   Web of Science ®Google Scholar
• M. H. Sharqawy and S. M. Zubair, “Efficiency and optimization of an annular fin with combined heat and mass transfer – An analytical solution,” Int. J. Refrig., vol. 30, no. 5, pp. 751–757, 2007. DOI: 10.1016/j.ijrefrig.2006.12.008.
   Web of Science ®Google Scholar
• M. Ben Slimene, S. Poncet, J. Bessrour and F. Kallel, “Numerical investigation of the flow dynamics and heat transfer in a rectangular shell-and-tube heat exchanger,” Case Stud. Therm. Eng., vol. 32, pp. 101873, 2022. DOI: 10.1016/j.csite.2022.101873.
   Web of Science ®Google Scholar
• V. Patel, R. Patel, N. Trapasia and V. Patel, “CFD simulation of dehumidification of air in humidification-dehumidification based water desalination system,” Iran J. Sci. Technol. Trans. Mech. Eng., vol. 46, no. 2, pp. 449–463, 2022. DOI: 10.1007/s40997-021-00454-0.
   Web of Science ®Google Scholar
• W. Li, X. Meng, H. Bian and M. Ding, “Numerical analysis of heat transfer enhancement on steam condensation in the presence of air outside the tube,” Nucl. Sci. Tech., vol. 33, no. 8, pp. 100, 2022. DOI: 10.1007/s41365-022-01090-2.
   Web of Science ®Google Scholar
• J. Wang, Y. Tao and J. Liu, “Numerical study on acid condensation and corrosion characteristics of three-dimensional finned tube surface,” Chem. Eng. Sci., vol. 238, pp. 116600, 2021. DOI: 10.1016/j.ces.2021.116600.
   Web of Science ®Google Scholar
• A. Adam, D. Han, W. He, M. Amidpour and H. Zhong, “Numerical investigation of the heat and mass transfer process within a cross-flow indirect evaporative cooling system for hot and humid climates,” J. Build. Eng., vol. 45, pp. 103499, 2022. DOI: 10.1016/j.jobe.2021.103499.
   Web of Science ®Google Scholar
• M. Ghosh, “Effect of flue gas constituents on boiler tube failure of a captive power plant,” Eng. Fail. Anal., vol. 151, pp. 107416, 2023. DOI: 10.1016/j.engfailanal.2023.107416.
   Web of Science ®Google Scholar
• H. Han, Y. He and W. Tao, “A numerical study of the deposition characteristics of sulfuric acid vapor on heat exchanger surfaces,” Chem. Eng. Sci., vol. 101, pp. 620–630, 2013. DOI: 10.1016/j.ces.2013.07.024.
   Web of Science ®Google Scholar
• K. Jeong, “Condensation of water vapor and sulfuric acid in boiler flue gas,” Ph.D. dissertation, Dept. Philos., Lehigh University, Bethlehem., PA, 2009.
   Google Scholar
• Compiling Group of Standard Method of Thermodynamic Calculation for Boiler Unit. Standard Method of Thermodynamic Calculation for Boiler Unit. Beijing, China: Machinery Industy Press, 1973.
   Google Scholar
• H. Wei, T. Cong, C. Jiang, W. Zhou and B. Bai, “Heat transfer enhancement of partially serrated twisted finned tube bank,” Heat Transf. Eng., 2023 (online). DOI: 10.1080/01457632.2022.2164682.
   Web of Science ®Google Scholar
• A. Atia, S. Bouabdallah, B. Ghernaout, M. Teggar and M. Arici, “Natural convection heat transfer in a three-dimensional enclosure under the effect of heated pin-fins of various shapes,” Numer. Heat Transf., Part A., 2023 (online). DOI: 10.1080/10407782.2023.2242580.
   Web of Science ®Google Scholar
• G. Sowmya, F. Gamaoun, A. Abdulrahman, R. S. Varun Kumar and B. C. Prasannakumara, “Significance of thermal stress in a convective-radiative annular fin with magnetic field and heat generation: application of DTM and MRPSM,” Propul. Power Res., vol. 11, no. 4, pp. 527–543, 2022. DOI: 10.1016/j.jppr.2022.11.001.
   Web of Science ®Google Scholar
• M. Torabi and A. Aziz, “Thermal performance and efficiency of convective-radiative T-shaped fins with temperature dependent thermal conductivity, heat transfer coefficient and surface emissivity,” Int. Commun. Heat Mass Transf., vol. 39, no. 8, pp. 1018–1029, 2012. DOI: 10.1016/j.icheatmasstransfer.2012.07.007.
   Web of Science ®Google Scholar
• C. Liao, L. Zeng, J. Long and A. Yongga, “Research on anti-frosting potential of air source heat pump evaporator in hot-summer and cold-winter zone,” Appl. Therm. Eng., vol. 220, pp. 119684, 2023. DOI: 10.1016/j.applthermaleng.2022.119684.
   Web of Science ®Google Scholar
• B. Kundu and S.-J. Yook, “Analytical model for extremum analysis of moistened fins involving all nonlinear energy exchange processes,” Case Stud. Therm. Eng., vol. 41, pp. 102691, 2023. DOI: 10.1016/j.csite.2022.102691.
   Web of Science ®Google Scholar
• Y. Sun, J. Ma, B. Li and Z. Guo, “Predication of nonlinear heat transfer in a convective-radiative fin with temperature-dependent properties by the collocation spectral method,” Numer. Heat Transf., Part B., vol. 69, no. 1, pp. 68–83, 2016. DOI: 10.1080/10407782.2015.1081043.
   Web of Science ®Google Scholar
• U. Bajpai, V. K. Gaba and S. Bhowmick, “A parametric study of functionally graded variable thickness longitudinal fin under fully wet condition,” in Innovative Product Design and Intelligent Manufacturing Systems, B. Deepak, D. R. K. Parhi, and P. C. Jena, Eds., Singapore: Springer Singapore, 2020, pp. 113–121.
   Google Scholar
• X. Wang, X. Niu, F. Bai, P. Zhang, S. Chen and J. Zhang, “Design and optimization of a helix finned tube heat exchanger for 2 k superfluid helium vertical test stand,” J. Therm. Sci. Eng. Appl., vol. 15, no. 6, pp. 061007, 2023. DOI: 10.1115/1.4057066.
   Web of Science ®Google Scholar
• S. A. Payambarpour, M. A. Nazari, M. H. Ahmadi and A. J. Chamkha, “Effect of partially wet-surface condition on the performance of fin-tube heat exchanger,” HFF, vol. 29, no. 10, pp. 3938–3958, 2019. DOI: 10.1108/HFF-07-2018-0362.
   Web of Science ®Google Scholar
• W. Pirompugd, C. Wang and S. Wongwises, “Correlations for wet surface ratio of fin-and-tube heat exchangers,” Int. J. Heat Mass Transf., vol. 53, no. 1–3, pp. 568–573, 2010. DOI: 10.1016/j.ijheatmasstransfer.2009.09.025.
   Web of Science ®Google Scholar