Experimental and numerical investigation of thermo-hydrodynamic performance of twin tube counter flow heat exchanger using cerium oxide nanofluid

References

• H. Maddah, M. Alizadeh, N. Ghasemi, and S. R. Wan Alwi, “Experimental study of Al2O3/water nanofluid turbulent heat transfer enhancement in the horizontal double pipes fitted with modified twisted tapes,” Int. J. Heat Mass Transfer, vol. 78, pp. 1042–1054, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.07.059.
   Web of Science ®Google Scholar
• M. M. Rahman, S. Saha, S. Mojumder, A. G. Naim, R. Saidur, and T. A. Ibrahim, “Effect of sine-squared thermal boundary condition on augmentation of heat transfer in a triangular solar collector filled with different nanofluids,” Num. Heat Transfer Part B. Fundamentals, vol. 68, pp. 53–74, 2015. DOI: 10.1080/10407790.2014.992058.
   Web of Science ®Google Scholar
• E. C. Okonkwo, I. Wole-Osho, I. W. Almanassra, Y. M. Abdullatif, and T. Al-Ansari, “An updated review of nanofluids in various heat transfer devices,” J. Therm. Anal. Calorim., vol. 145, pp. 2817–2872, 2021. DOI: 10.1007/s10973-020-09760-2.
   Web of Science ®Google Scholar
• E. C. Okonkwo, M. Abid, and T. A. H. Ratlamwala, “Numerical analysis of heat transfer enhancement in a parabolic trough collector based on geometry modifications and working fluid usage,” J. Sol. Ener. Eng., vol. 140, pp. 1–11, 2018. DOI: 10.1115/1.4040076.
   Web of Science ®Google Scholar
• M. Nazari, M. Ashouri, M. H. Kayhani, and A. Tamayol, “Experimental study of convective heat transfer of a nanofluid through a pipe filled with metal foam,” Int. J. Ther. Sci., vol. 88, pp. 33–39, 2015. DOI: 10.1016/j.ijthermalsci.2014.08.013.
   Web of Science ®Google Scholar
• P. H. Jadhav, N. Gnanasekaran, and D. Arumuga Perumal, “Thermodynamic analysis of entropy generation in a horizontal pipe filled with high porosity metal foams,” Mater. Today: Proc., vol. 51, pp. 1598–1603, Part 3, 2021. DOI: 10.1016/j.matpr.2021.10.451.
   Google Scholar
• T. S. Athith, G. Trilok, P. H. Jadhav, and N. Gnanasekaran, “Heat transfer optimization using genetic algorithm and artificial neural network in a heat exchanger with partially filled different high porosity metal foam,” Mater. Today Proc., vol. 51, pp. 1642–1648, 2022. DOI: 10.1016/j.matpr.2021.11.248.
   Google Scholar
• P. H. Jadhav, N. Gnanasekaran, and M. Mobedi, “Analysis of functionally graded metal foams for the accomplishment of heat transfer enhancement under partially filled condition in a heat exchanger,” Energy, vol. 263, pp. 125691, 2023. DOI: 10.1016/j.energy.2022.125691.
   Web of Science ®Google Scholar
• P. H. Jadhav, T. G. N. Gnanasekaran, and M. Mobedi, “Performance score based multi-objective optimization for thermal design of partially filled high porosity metal foam pipes under forced convection,” Int. J. Heat Mass Transfer., vol. 182, pp. 121911, 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.121911.
   Web of Science ®Google Scholar
• P. H. Jadhav, B. Kotresha, N. Gnanasekaran, and D. Arumuga Perumal, “Forced convection analysis in a horizontal pipe in the presence of aluminium metal foam—A numerical study,” Fluid Mech. Fluid Power, pp. 491–498, 2021. DOI: 10.1007/978-981-16-0698-4_53.
   Google Scholar
• G. Huminic and A. Huminic, “Application of nanofluids in heat exchangers: A review,” Renew. Sust. Ener. Rev., vol. 16, pp. 5625–5638, 2012. DOI: 10.1016/j.rser.2012.05.023.
   Web of Science ®Google Scholar
• P. H. Jadhav and N. Gnanasekaran, “Optimum design of heat exchanging device for efficient heat absorption using high porosity metal foams,” Int. Comm. Heat Mass Transfer, vol. 126, pp. 105475, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105475.
   Web of Science ®Google Scholar
• K. Irshad, N. Islam, M. H. Zahir, A. A. Pasha, and A. F. Abdelgawad, “Thermal performance investigation of Therminol55/MWCNT + CuO nanofluid flow in a heat exchanger from an exergy and entropy approach,” Case Stud. Therm. Eng., vol. 34, pp. 102010, 2022. DOI: 10.1016/j.csite.2022.102010.
   Web of Science ®Google Scholar
• D. Huang, Z. Wu, and B. Sunden, “Pressure drop and convective heat transfer of Al2O3/water and MWCNT/water nanofluids in a chevron plate heat exchanger,” Int. J. Heat Mass Transfer, vol. 89, pp. 620–626, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.082.
   Web of Science ®Google Scholar
• M. S. Kamel, O. Al-Oran, and F. Lezsovits, “Thermal conductivity of Al2O3 and CeO2 nanoparticles and their hybrid based water nanofluids: an experimental study,” Period. Polytech. Chem. Eng., vol. 65, pp. 50–60, 2020. DOI: 10.3311/PPch.15382.
   Web of Science ®Google Scholar
• M. Akhtari, M. Haghshenasfard, and M. R. Talaie, “Numerical and experimental investigation of heat transfer of α-Al2O3/water nanofluid in double pipe and shell and tube heat exchangers,” Num. Heat Transfer Part A: Appl., vol. 63, pp. 941–958, 2013. DOI: 10.1080/10407782.2013.772855.
   Web of Science ®Google Scholar
• A. Beheshti, M. K. Moraveji, and M. Hejazian, “Comparative numerical study of nanofluid heat transfer through an annular channel,” Num. Heat Transfer Part A: Appl., vol. 67, pp. 100–117, 2015. DOI: 10.1080/10407782.2014.894359.
   Web of Science ®Google Scholar
• I. M. Shahrul, I. M. Mahbubul, R. Saidur, S. S. Khaleduzzaman, M. F. M. Sabri, and M. M. Rahman, “Effectiveness study of a shell and tube heat exchanger operated with nanofluids at different mass flow rates,” Num. Heat Transfer Part A: Appl., vol. 65, pp. 699–713, 2014. DOI: 10.1080/10407782.2013.846196.
   Web of Science ®Google Scholar
• D. Zheng, J. Yang, J. Wang, S. Kabelac, and B. Sundén, “Analyses of thermal performance and pressure drop in a plate heat exchanger filled with ferrofluids under a magnetic field,” Fuel, vol. 293, pp. 120432, 2021. DOI: 10.1016/j.fuel.2021.120432.
   Web of Science ®Google Scholar
• A. K. Tiwari, P. Ghosh, and J. Sarkar, “Particle concentration levels of various nanofluids in plate heat exchanger for best performance,” Int. J. Heat Mass Transfer, vol. 89, pp. 1110–1118, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.05.118.
   Web of Science ®Google Scholar
• A. K. Tiwari, P. Ghosh, and J. Sarkar, “Performance comparison of the plate heat exchanger using different nanofluids,” Exp. Therm. Fluid Sci., vol. 49, pp. 141–151, 2013. DOI: 10.1016/j.expthermflusci.2013.04.012.
   Web of Science ®Google Scholar
• A. K. Tiwari, P. Ghosh, and J. Sarkar, “Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger,” Appl. Therm. Eng., vol. 57, pp. 24–32, 2013. DOI: 10.1016/j.applthermaleng.2013.03.047.
   Web of Science ®Google Scholar
• A. Dhall and W. Self, “Cerium oxide nanoparticles : A brief review of their synthesis methods and biomedical applications,” Antioxidants vol. 7, pp. 97, 2018. DOI: 10.3390/antiox7080097.
   Web of Science ®Google Scholar
• J. Z. Lin, Y. Xia, and X. K. Ku, “Flow and heat transfer characteristics of nanofluids containing rod-like particles in a turbulent pipe flow,” Int. J. Heat Mass Transfer, vol. 93, pp. 57–66, 2016. DOI: 10.1016/j.ijheatmasstransfer.2015.09.088.
   Web of Science ®Google Scholar
• M. Khoshvaght-Aliabadi, “Influence of different design parameters and Al2O3-water nanofluid flow on heat transfer and flow characteristics of sinusoidal-corrugated channels,” Ener. Conv. Manag., vol. 88, pp. 96–105, 2014. DOI: 10.1016/j.enconman.2014.08.042.
   Web of Science ®Google Scholar
• M. Hemmat Esfe, H. Hajmohammad, D. Toghraie, H. Rostamian, O. Mahian, and S. Wongwises, “Multi-objective optimization of nanofluid flow in double tube heat exchangers for applications in energy systems,” Energy, vol. 137, pp. 160–171, 2017. DOI: 10.1016/j.energy.2017.06.104.
   Web of Science ®Google Scholar
• A. A. R. Darzi, M. Farhadi, and K. Sedighi, “Heat transfer and flow characteristics of Al2O3-water nanofluid in a double tube heat exchanger,” Int. Comm. Heat Mass Transfer, vol. 47, pp. 105–112, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.06.003.
   Web of Science ®Google Scholar
• K. Anoop, J. Cox, and R. Sadr, “Thermal evaluation of nanofluids in heat exchangers,” Int. Comm. Heat Mass Transfer, vol. 49, pp. 5–9, 2013. DOI: 10.1016/j.icheatmasstransfer.2013.10.002.
   Web of Science ®Google Scholar
• M. Chandra Sekhara Reddy and V. Vasudeva Rao, “Experimental investigation of heat transfer coefficient and friction factor of ethylene glycol water based TiO2 nanofluid in double pipe heat exchanger with and without helical coil inserts,” Int. Comm. Heat Mass Transfer, vol. 50, pp. 68–76, 2014. DOI: 10.1016/j.icheatmasstransfer.2013.11.002.
   Web of Science ®Google Scholar
• R. S. Khedkar, S. S. Sonawane, and K. L. Wasewar, “Heat transfer study on concentric tube heat exchanger using TiO2-water based nanofluid,” Int. Comm. Heat Mass Transfer, vol. 57, pp. 163–169, 2014. DOI: 10.1016/j.icheatmasstransfer.2014.07.011.
   Web of Science ®Google Scholar
• M. Goodarzi et al., “Investigation of heat transfer and pressure drop of a counter flow corrugated plate heat exchanger using MWCNT based nanofluids,” Int. Comm. Heat Mass Transfer, vol. 66, pp. 172–179, 2015. DOI: 10.1016/j.icheatmasstransfer.2015.05.002.
   Web of Science ®Google Scholar
• Q. Zhao, Y. Zhang, D. Zhou, Y. Huang, M. Xu, and Y. Tian, “Lattice Boltzmann method for nanofluid forced convection heat exchange in a porous channel with multiple heated sources,” Num. Heat Transfer Part A: Appl., vol. 79, pp. 21–39, 2021. DOI: 10.1080/10407782.2020.1814590.
   Web of Science ®Google Scholar
• X. Zhang, J. Li, and Y. Zhang, “Heat transfer characteristics of nanofluid under the action of magnetic field based on molecular dynamics and flow states,” Num. Heat Transfer Part A: Appl., vol. 0, pp. 1–25, 2023. DOI: 10.1080/10407782.2023.2187904.
   Google Scholar
• M. Mahmoodi, A. Sohankar, and A. Joulaei, “Investigations of nanofluid flow and heat transfer in a rotating microchannel using single- and two-phase approaches,” Num. Heat Transfer Part A: Appl., vol. 83, no. 2, pp. 80–115, 2023. DOI: 10.1080/10407782.2022.2083886.
   Web of Science ®Google Scholar
• Z. Yang, X. Luo, G. Wang, B. Guan, and H. Yang, “Numerical study on the effects of supercritical CO2-based nanofluid on heat transfer deterioration,” Num. Heat Transfer Part A: Appl., vol. 82, pp. 193–216, 2022. DOI: 10.1080/10407782.2022.2068880.
   Web of Science ®Google Scholar
• A. Kumar, S. Kumar, S. Kalia, and   Priyanka, “Optimization and correlations development for heat transfer and fluid flow characteristics of ZnO/H2O-ethylene glycol-based nanofluid flow through an inclined ribbed square duct,” Num. Heat Transfer Part A: Appl., vol. 0, pp. 1–16, 2023. DOI: 10.1080/10407782.2023.2175747.
   Google Scholar
• B. K. Sharma, C. Kumawat, and M. M. Bhatti, “Applications Optimizing energy generation in power-law nanofluid flow through curved arteries with gold nanoparticles,” Num. Heat Transf. Part A: Appl., vol. 0, pp. 1–33, 2023. DOI: 10.1080/10407782.2023.2232123.
   Google Scholar
• M. M. Bhatti and R. Ellahi, “Numerical investigation of non-Darcian nanofluid flow across a stretchy elastic medium with velocity and thermal slips,” Num. Heat Transf. Part B: Fundamentals, vol. 83, pp. 323–343, 2023. DOI: 10.1080/10407790.2023.2174624.
   Web of Science ®Google Scholar
• P. Michael Joseph Stalin, T. V. Arjunan, M. M. Matheswaran, and N. Sadanandam, “Experimental and theoretical investigation on the effects of lower concentration CeO 2/water nanofluid in flat-plate solar collector,” J. Therm. Anal. Calorim., vol. 135, no. 1, pp. 29–44, 2019. DOI: 10.1007/s10973-017-6865-4.
   Web of Science ®Google Scholar
• P. Mayeli, H. Hesami, H. Besharati-Foumani, and M. Niajalili, “Applications Al2O3–water nanofluid heat transfer and entropy generation in a ribbed channel with wavy wall in the presence of magnetic field,” Num. Heat Transfer Part A: Appl., vol. 73, no. 9, pp. 604–623, 2018. DOI: 10.1080/10407782.2018.1461494.
   Web of Science ®Google Scholar
• T. S. Sreeremya, A. Krishnan, A. P. Mohamed, U. S. Hareesh, and S. Ghosh, “Synthesis and characterization of cerium oxide based nanofluids : An efficient coolant in heat transport applications,” Chem. Eng. J., vol. 255, pp. 282–289, 2014. DOI: 10.1016/j.cej.2014.06.061.
   Web of Science ®Google Scholar
• G. S. Reddy, R. Kalaivanan, R. U. Kumar, and K. P. V. K. Varma, “Augmenting heat transfer performance in a heat exchanger with CeO2 nanofluids,” Mat. Res. Innov., vol. 0, pp. 1–13, 2023. DOI: 10.1080/14328917.2023.2213487.
   Google Scholar
• P. H. Jadhav, G. Nagarajan, and D. A. Perumal, “Conjugate heat transfer study comprising the effect of thermal conductivity and irreversibility in a pipe filled with metallic foams,” Heat Mass Transfer, vol. 57, no. 6, pp. 911–930, 2021. DOI: 10.1007/s00231-020-03000-x.
   Web of Science ®Google Scholar
• P. H. Jadhav, N. Gnanasekaran, and D. A. Perumal, “Numerical consideration of LTNE and Darcy extended Forchheimer models for the analysis of forced convection in a horizontal pipe in the presence of metal foam,” J. Heat Transfer, vol. 143, pp. 1–16, 2021. DOI: 10.1115/1.4048622.
   Web of Science ®Google Scholar
• P. H. Jadhav, N. Gnanasekaran, D. A. Perumal, and M. Mobedi, “Performance evaluation of partially filled high porosity metal foam configurations in a pipe,” Appl. Therm. Eng., vol. 194, pp. 117081, 2021. DOI: 10.1016/j.applthermaleng.2021.117081.
   Web of Science ®Google Scholar
• G. Narendran, N. Gnanasekaran, and D. A. Perumal, “Thermodynamic irreversibility and conjugate effects of integrated microchannel cooling device using TiO2 nanofluid,” Heat Mass Transfer, vol. 56, pp. 489–505, 2020. DOI: 10.1007/s00231-019-02704-z.
   Web of Science ®Google Scholar
• P. V. K. V. Kola, S. K. Pisipaty, S. S. Mendu, and R. Ghosh, “Optimization of performance parameters of a double pipe heat exchanger with cut twisted tapes using CFD and RSM,” Chem. Eng. Process. Proc. Intensifi., vol. 163, pp. 108362, 2021. DOI: 10.1016/j.cep.2021.108362.
   Web of Science ®Google Scholar
• K. Aroonrat, C. Jumpholkul, R. Leelaprachakul, A. S. Dalkilic, O. Mahian, and S. Wongwises, “Heat transfer and single-phase flow in internally grooved tubes,” Int. Comm. Heat Mass Transfer, vol. 42, pp. 62–68, 2013. DOI: 10.1016/j.icheatmasstransfer.2012.12.001.
   Web of Science ®Google Scholar
• J. Fernández-Seara, F. J. Uhía, and J. Sieres, “Laboratory practices with the wilson plot method,” Exp. Heat Transfer, vol. 20, pp. 123–135, 2007. DOI: 10.1080/08916150601091415.
   Web of Science ®Google Scholar