Hybrid ZOA-SNN technique heat transfer enhancement of the heat exchanger

References

• A. C. Lyman, R. A. Stephan, K. A. Thole, L. W. Zhang and S. B. Memory, “Scaling of heat transfer coefficients along louvered fins,” Experimental Thermal Fluid Sci., vol. 26, no. 5, pp. 547–563, 2002. DOI: 10.1016/S0894-1777(02)00163-2.
   Web of Science ®Google Scholar
• J. Gilmore, B. Vanderwaal, I. Rose and J. Riesz, “Integration of solar generation into electricity markets: an Australian National Electricity Market case study,” IET Renewable Power Generation, vol. 9, no. 1, pp. 46–56, 2015. DOI: 10.1049/iet-rpg.2014.0108.
   Web of Science ®Google Scholar
• A. H. Rasheed, H. B. Alias and S. D. Salman, “Experimental and numerical investigations of heat transfer enhancement in shell and helically microtube heat exchanger using nanofluids,” Int. J. Thermal Sciences, vol. 159, pp. 106547, 2021. DOI: 10.1016/j.ijthermalsci.2020.106547.
   Web of Science ®Google Scholar
• A. R. Al-Obaidi and J. Alhamid, “Investigation of flow pattern, "thermohydraulic performance and heat transfer improvement in 3D corrugated circular pipe under varying structure configuration parameters with development different correlations,” Int. Commun. Heat Mass Transfer, vol. 126, pp. 105394, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105394.
   Web of Science ®Google Scholar
• A. Sarmadian, M. Shafaee, H. Mashouf and S. G. Mohseni, “Condensation heat transfer and pressure drop characteristics of R-600a in horizontal smooth and helically dimpled tubes,” Experimental Thermal Fluid Sci., vol. 86, pp. 54–62, 2017. DOI: 10.1016/j.expthermflusci.2017.04.001.
   Web of Science ®Google Scholar
• R. Kavitha,Y. M. Abd Algani,K. Kulkarni andM. K. Gupta,“Heat transfer enhancement in a double pipe heat exchanger with copper oxide nanofluid: An experimental study,” Mater. Today Proceed., vol. 56, pp. 3446–3449, 2022.
   Google Scholar
• M.K. , GuptaV.K. , Bajpai andT.K. , Garg, " Long-Term Structural Integrity of Steel Stacks: Proposed Tools for Inspection & Maintenance”. Int. J. Mech. Eng., New Delhi, ISSN 0974, Vol. 5823, pp.109-111.
   Google Scholar
• M. Bahiraei, S. M. Naghibzadeh and M. Jamshidmofid, “Efficacy of an eco-friendly nanofluid in a miniature heat exchanger regarding to arrangement of silver nanoparticles,” Energy Conversion Manage., vol. 144, pp. 224–234, 2017. DOI: 10.1016/j.enconman.2017.04.076.
   Web of Science ®Google Scholar
• C. C. Wang, W. L. Fu and C. T. Chang, “Heat transfer and friction characteristics of typical wavy fin-and-tube heat exchangers,” Experimental Thermal Fluid Sci., vol. 14, no. 2, pp. 174–186, 1997. DOI: 10.1016/S0894-1777(96)00056-8.
   Web of Science ®Google Scholar
• M. D. Islam, K. Oyakawa and M. Yaga, “Heat transfer enhancement from a surface affixed with rectangular fins of different patterns and arrangement in duct flow,” J. Enh. Heat Transf., vol. 15, no. 1, pp. 31–50, 2008. DOI: 10.1615/JEnhHeatTransf.v15.i1.30.
   Web of Science ®Google Scholar
• J. S. Jabardo, J. B. ZoghbiFilho and A. Salamanca, “Experimental study of the air side performance of louver and wave fin-and-tube coils,” Experimental Thermal Fluid Sci., vol. 30, no. 7, pp. 621–631, 2006. DOI: 10.1016/j.expthermflusci.2006.01.001.
   Web of Science ®Google Scholar
• I. Kotcioglu, S. Caliskan, T. Ayhan and S. Baskaya, “An experimental investigation of heat transfer enhancement in a rectangular duct with plate fins,” Heat Trans. Res., vol. 40, no. 3, pp. 263–280, 2009. DOI: 10.1615/HeatTransRes.v40.i3.80.
   Web of Science ®Google Scholar
• M. Saeed, A. S. Berrouk, Y. F. Al Wahedi, M. P. Singh, I. A. Dagga and I. Afgan, “Performance enhancement of a C-shaped printed circuit heat exchanger in supercritical CO2 Brayton cycle: a machine learning-based optimization study,” Case Stud. Thermal Eng., vol. 38, pp. 102276, 2022. DOI: 10.1016/j.csite.2022.102276.
   Web of Science ®Google Scholar
• G. Krishnayatra, S. Tokas and R. Kumar, “Numerical heat transfer analysis & predicting thermal performance of fins for a novel heat exchanger using machine learning,” Case Stud. Thermal Engineering, vol. 21, pp. 100706, 2020. DOI: 10.1016/j.csite.2020.100706.
   Web of Science ®Google Scholar
• N. Kaewchoothong, P. Narato and C. Nuntadusit, “Experimental investigation of the heat transfer characteristics and thermal performance inside a ribbed serpentine channel during rotational effects,” Experimental Thermal Fluid Sci., vol. 111, pp. 109973, 2020. DOI: 10.1016/j.expthermflusci.2019.109973.
   Web of Science ®Google Scholar
• R. Alizadeh, V. Dorfaki, A. Ameri Valizadeh, M. Ardalan and M. Javidi Sarafan, “Heat transfer and pressure drop in a sinus blowing of copper oxide-water non-Newtonian nanofluid in a sudden expansion process in the presence of variable magnetic field: a numerical solution,” Energy Sources A: Recovery, Utilization, Environ. Effect., pp. 1–24, 2020. DOI: 10.1080/15567036.2020.1817195.
   Google Scholar
• A. Yousefi, A. Nejat and M. H. Sabour, “Ribbed channel heat transfer enhancement of an internally cooled turbine vane using cooling conjugate heat transfer simulation,” Thermal Sci. Eng. Progress, vol. 19, pp. 100641, 2020. DOI: 10.1016/j.tsep.2020.100641.
   Google Scholar
• W. J. Su, T. H. Huang and Y. H. Liu, “Heat transfer and friction in trapezoidal channels with X-shaped ribs,” Int. J. Thermal Sci., vol. 164, pp. 106871, 2021. DOI: 10.1016/j.ijthermalsci.2021.106871.
   Web of Science ®Google Scholar
• M. Z. A. Khan, H. A. Khan and M. Aziz, “Performance optimization of heat-exchanger with delta-wing tape inserts using machine learning,” APPl. Therm. Eng., vol. 216, pp. 119135, 2022. DOI: 10.1016/j.applthermaleng.2022.119135.
   Web of Science ®Google Scholar
• T. Ma, Z. Guo, M. Lin and Q. Wang, “Recent trends on nanofluid heat transfer machine learning research applied to renewable energy,” Renew. Sustain. Energy Reviews, vol. 138, pp. 110494, 2021. DOI: 10.1016/j.rser.2020.110494.
   Web of Science ®Google Scholar
• M. Z. A. Khan, M. Aziz and A. T. Wijayanta, “Prediction of heat transfer enhancement of delta-wing tape inserts using artificial neural network,” Case Stud. Thermal Eng., vol. 27, pp. 101322, 2021. DOI: 10.1016/j.csite.2021.101322.
   Web of Science ®Google Scholar
• N. Kedam, D. A. Uglanov, E. V. Blagin, A. A. Gorshkalev, R. A. Panshin and J. Liu, “Unified ANN model for heat transfer factor (j) and friction factor (f) prediction in offset strip and wavy fin PFHEs,” Case Stud. Thermal Eng., vol. 53, pp. 103845, 2024. DOI: 10.1016/j.csite.2023.103845.
   Web of Science ®Google Scholar
• R. Duraisamy Ramalingam, et al., “Inferences on the effects of geometries and heat transfer fluids in multi-cavity solar receivers by using CFD,” Environ. Sci. Pollut. Res. Int., vol. 27, no. 26, pp. 32205–32217, 2020. DOI: 10.1007/s11356-019-06829-w.
   PubMed Web of Science ®Google Scholar
• P. B. Dehankar, K. Joshi, V. A. Bhosale and R. N. Mulik, “Assessment of twist tape thermal performance in heat transfer passive augmentation technique,” Beni.-Suef. Univ. J. Basic Appl. Sci., vol. 11, no. 1, pp. 29, 2022. DOI: 10.1186/s43088-022-00208-0.
   Google Scholar
• R. Kumar and S. P. Mahulikar, “Heat transfer characteristics of water flowing through micro-tube heat exchanger with variable fluid properties,” J. Therm. Anal. Calorim., vol. 140, no. 4, pp. 1919–1934, 2020. DOI: 10.1007/s10973-019-08937-8.
   Web of Science ®Google Scholar
• A. Saysroy, W. Changcharoen and S. Eiamsa-Ard, “Performance assessment of turbular heat exchanger tubes containing rectangular-cut twisted tapes with alternate axes,” J. Mech. Sci. Technol., vol. 32, no. 1, pp. 433–445, 2018. DOI: 10.1007/s12206-017-1244-4.
   Web of Science ®Google Scholar
• E. Trojovska, M. Dehghani and P. Trojovsky, “Zebra optimization algorithm: a new bio-inspired optimization algorithm for solving optimization algorithm,” IEEE Access, vol. 10, pp. 49445–49473, 2022. DOI: 10.1109/ACCESS.2022.3172789.
   Google Scholar
• C. Liu, W. Shen, L. Zhang, Y. Du and Z. Yuan, “Spike neural network learning algorithm based on an evolutionary membrane algorithm,” IEEE Access, vol. 9, pp. 17071–17082, 2021. DOI: 10.1109/ACCESS.2021.3053280.
   Google Scholar