0
Views
0
CrossRef citations to date
0
Altmetric
Research Article

An innovative manifold microchannel heat sink for thermal management of high-power chips with multiple hotspots

, , , &
Received 22 Jan 2024, Accepted 03 Jul 2024, Published online: 14 Jul 2024

References

  • R. van Erp, G. Kampitsis and E. Matioli, “Efficient microchannel cooling of multiple power devices with compact flow distribution for high power-density converters,” IEEE Trans. Power Electron, vol. 35, no. 7, pp. 7235–7245, 2020. DOI: 10.1109/TPEL.2019.2959736.
  • W.-J. Luo, P. Vishwakarma and B. Panigrahi, “Hydrodynamic influence on thermal management of flexible heatsink devices embedded with out-of-plane intricate microchannel design,” Int. Commun. Heat Mass Transf., vol. 144, pp. 106792, 2023. DOI: 10.1016/j.icheatmasstransfer.2023.106792.
  • I. A. Ghani, N. A. C. Sidik and N. Kamaruzaman, “Hydrothermal performance of microchannel heat sink: the effect of channel design,” Int. J. Heat Mass Transf., vol. 107, pp. 21–44, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.11.031.
  • D. B. Tuckerman and R. F. W. Pease, “High-performance heat sinking for VLSI,” IEEE Electron Device Lett., vol. 2, no. 5, pp. 126–129, 1981. DOI: 10.1109/EDL.1981.25367.
  • L. Chai, G. D. Xia and H. S. Wang, “Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls,” Appl. Therm. Eng., vol. 92, pp. 32–41, 2016. DOI: 10.1016/j.applthermaleng.2015.09.071.
  • L. Chai, L. Wang and X. Bai, “Thermohydraulic performance of microchannel heat sinks with triangular ribs on sidewalls – Part 1: local fluid flow and heat transfer characteristics,” Int. J. Heat Mass Transf., vol. 127, pp. 1124–1137, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.08.114.
  • H-l Liu, H-y Guo, Z-l Xie and L. Sang, “Numerical investigations for optimizing a novel micro-channel sink with perforated baffles and perforated walls,” Int. Commun. Heat Mass Transf., vol. 126, pp. 105342, 2021. DOI: 10.1016/j.icheatmasstransfer.2021.105342.
  • M. K. Mohit and R. Gupta, “Numerical investigation of the performance of rectangular micro-channel equipped with micro-pin-fin,” Case Stud. Therm. Eng., vol. 32, pp. 101884, 2022. DOI: 10.1016/j.csite.2022.101884.
  • M. Vilarrubí, et al., “Experimental and numerical study of micro-pin-fin heat sinks with variable density for increased temperature uniformity,” Int. J. Therm. Sci., vol. 132, pp. 424–434, 2018. DOI: 10.1016/j.ijthermalsci.2018.06.019.
  • S. Feng, et al., “Theoretical and numerical investigation of embedded microfluidic thermal management using gradient distribution micro pin fin arrays,” Appl. Therm. Eng., vol. 153, pp. 748–760, 2019. DOI: 10.1016/j.applthermaleng.2019.03.017.
  • B. Ding, Z.-H. Zhang, L. Gong, M.-H. Xu and Z.-Q. Huang, “A novel thermal management scheme for 3D-IC chips with multi-cores and high power density,” Appl. Therm. Eng., vol. 168, pp. 114832, 2020. DOI: 10.1016/j.applthermaleng.2019.114832.
  • D. Ansari and K.-Y. Kim, “Hotspot thermal management using a microchannel-pinfin hybrid heat sink,” Int. J. Therm. Sci., vol. 134, pp. 27–39, 2018. DOI: 10.1016/j.ijthermalsci.2018.07.043.
  • D. Ansari and K.-Y. Kim, “Hotspot management using a hybrid heat sink with stepped pin-fins,” Numer. Heat Transfer, Part A, vol. 75, no. 6, pp. 359–380, 2019. DOI: 10.1080/10407782.2019.1599272.
  • Z. Soleymani, M. Rahimi, M. Gorzin and Y. Pahamli, “Performance analysis of hotspot using geometrical and operational parameters of a microchannel pin-fin hybrid heat sink,” Int. J. Heat Mass Transf., vol. 159, pp. 120141, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120141.
  • D. Ansari and J. H. Jeong, “A novel composite pinfin heat sink for hotspot mitigation,” Int. J. Heat Mass Transf., vol. 156, pp. 119843, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.119843.
  • D. Ansari and J. H. Jeong, “A silicon-diamond microchannel heat sink for die-level hotspot thermal management,” Appl. Therm. Eng., vol. 194, pp. 117131, 2021. DOI: 10.1016/j.applthermaleng.2021.117131.
  • G. Lu, J. Yang, X. Zhai and X. Wang, “Hotspot thermal management in microchannel heat sinks with vortex generators,” Int. J. Therm. Sci., vol. 161, pp. 106727, 2021. DOI: 10.1016/j.ijthermalsci.2020.106727.
  • A. A. Y. Al-Waaly, M. C. Paul and P. Dobson, “Liquid cooling of non-uniform heat flux of a chip circuit by subchannels,” Appl. Therm. Eng., vol. 115, pp. 558–574, 2017. DOI: 10.1016/j.applthermaleng.2016.12.061.
  • H. Esmaeilzadeh, E. Blem, R. St. Amant, K. Sankaralingam and D. Burger, “Power Limitations and Dark Silicon Challenge the Future of Multicore,” ACM Trans. Comput. Syst., vol. 30, no. 3, pp. 1–27, 2012. DOI: 10.1145/2324876.2324879.
  • E. Kermani, S. Dessiatoun, A. Shooshtari and M. M. Ohadi, “Experimental investigation of heat transfer performance of a manifold microchannel heat sink for cooling of concentrated solar cells,” 2009 IEEE 59th Electronic Components and Technol. Conf, 2009. in. pp. 453–459. DOI: 10.1109/Ectc.2009.5074053.
  • Y. Yan, D. Wang, F. Xu, Z. He and Z. Yang, “Numerical study on hot spots thermal management in low pressure gradient distribution narrow microchannel embedded with pin fins,” Int. J. Heat Mass Transf., vol. 186, pp. 122518, 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122518.
  • P. Zając, C. Maj and A. Napieralski, “Peak temperature reduction by optimizing power density distribution in 3D ICs with microchannel cooling,” Microelectron. Reliab., vol. 79, pp. 488–498, 2017. DOI: 10.1016/j.microrel.2017.04.023.
  • S. Feng, Y. Yan, H. Li, L. Zhang and S. Yang, “Thermal management of 3D chip with non-uniform hotspots by integrated gradient distribution annular-cavity micro-pin fins,” Appl. Therm. Eng., vol. 182, pp. 116132, 2021. DOI: 10.1016/j.applthermaleng.2020.116132.
  • G. M. Harpole and J. E. Eninger, “Micro-channel heat exchanger optimization,” Proceedings of the Seventh Annual IEEE Semiconductor Thermal Measurement and Management Symposium vol., pp. 59–63., 1991.
  • M. B. Bowers and I. Mudawar, “High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks,” Int. J. Heat Mass Transf., vol. 37, no. 2, pp. 321–332, 1994. DOI: 10.1016/0017-9310(94)90103-1.
  • S. Yang, J. Li, B. Cao, Z. Wu and K. Sheng, “Investigation of Z-type manifold microchannel cooling for ultra-high heat flux dissipation in power electronic devices,” Int. J. Heat Mass Transf., vol. 218, pp. 124792, 2024. DOI: 10.1016/j.ijheatmasstransfer.2023.124792.
  • B. Chen, C. Zhang, Y. Xu and Z. Chen, “Performance improvement of Z-type manifold microchannel heat sink with novel fin-arrangements,” Heat Transfer Eng., pp. 1–16, 2024. vol. pp. DOI: 10.1080/01457632.2024.2337972.
  • I. A. Ghani, N. A. Che Sidik, N. Kamaruzzaman, W. Jazair Yahya and O. Mahian, “The effect of manifold zone parameters on hydrothermal performance of micro-channel HeatSink: a review,” Int. J. Heat Mass Transf., vol. 109, pp. 1143–1161, 2017. DOI: 10.1016/j.ijheatmasstransfer.2017.03.007.
  • Y.-H. Pan, R. Zhao, X.-H. Fan, Y.-L. Nian and W.-L. Cheng, “Study on the effect of varying channel aspect ratio on heat transfer performance of manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 163, pp. 120461, 2020. DOI: 10.1016/j.ijheatmasstransfer.2020.120461.
  • Y. Lin, et al., “Single-phase and two-phase flow and heat transfer in microchannel heat sink with various manifold arrangements,” Int. J. Heat Mass Transf., vol. 171, pp. 121118, 2021. DOI: 10.1016/j.ijheatmasstransfer.2021.121118.
  • K. Tang, et al., “Simulation and optimization of thermal performance in diverging/converging manifold microchannel heat sink,” Int. J. Heat Mass Transf., vol. 200, pp. 123495, 2023. DOI: 10.1016/j.ijheatmasstransfer.2022.123495.
  • J. Zhang, et al., “Thermal and hydrodynamic characteristics of single-phase flow in manifold microchannels with countercurrent regions,” Int. J. Heat Mass Transf., vol. 211, pp. 124265, 2023. DOI: 10.1016/j.ijheatmasstransfer.2023.124265.
  • N. Fallahtafti, et al., “Shape optimization of hotspot targeted micro pin fins for heterogeneous integration applications,” Int. J. Heat Mass Transf., vol. 192, pp. 122897, 2022. DOI: 10.1016/j.ijheatmasstransfer.2022.122897.
  • Y. M. A. Manaserh, et al., “Multi-objective optimization of 3D printed liquid cooled heat sink with guide vanes for targeting hotspots in high heat flux electronics,” Int. J. Heat Mass Transf., vol. 184, pp. 122287, 2022. DOI: 10.1016/j.ijheatmasstransfer.2021.122287.
  • J. Zhou, et al., “Flow thermohydraulic characterization of hierarchical-manifold microchannel heat sink with uniform flow distribution,” Appl. Therm. Eng., vol. 198, pp. 117510, 2021. DOI: 10.1016/j.applthermaleng.2021.117510.
  • W.-J. Luo, P. Vishwakarma, C.-C. Hsieh and B. Panigrahi, “Microfluidic modular heat sink with improved material characteristics towards thermal management of flexible electronics,” Appl. Therm. Eng., vol. 216, pp. 119142, 2022. DOI: 10.1016/j.applthermaleng.2022.119142.
  • D. Kong, et al., “An additively manufactured manifold-microchannel heat sink for high-heat flux cooling,” Int. J. Mech. Sci., vol. 248, pp. 108228, 2023. DOI: 10.1016/j.ijmecsci.2023.108228.
  • C. Chen, X. Wang, B. Yuan, W. Du and G. Xin, “Investigation of flow and heat transfer performance of the manifold microchannel with different manifold arrangements,” Case Stud. Therm. Eng., vol. 34, pp. 102073, 2022. DOI: 10.1016/j.csite.2022.102073.
  • S. Wang, G. Xia, D. Ma, R. Li and L. Xu, “Influence of restrictor on the thermal-hydraulic performance in manifold microchannel heat sink,” Int. Commun. Heat Mass Transf., vol. 149, pp. 107093, 2023. DOI: 10.1016/j.icheatmasstransfer.2023.107093.
  • S. Kumar and P. K. Singh, “A novel approach to manage temperature non-uniformity in minichannel heat sink by using intentional flow maldistribution,” Appl. Therm. Eng., vol. 163, pp. 114403, 2019. DOI: 10.1016/j.applthermaleng.2019.114403.
  • L. S. Maganti, P. Dhar, T. Sundararajan and S. K. Das, “Mitigating non‐uniform heat generation induced hot spot(s) in multicore processors using nanofluids in parallel microchannels,” Int. J. Therm. Sci., vol. 125, pp. 185–196, 2018. DOI: 10.1016/j.ijthermalsci.2017.11.015.
  • X. Liu and J. Yu, “Numerical study on performances of mini-channel heat sinks with non-uniform inlets,” Appl. Therm. Eng., vol. 93, pp. 856–864, 2016. DOI: 10.1016/j.applthermaleng.2015.09.032.
  • Y. Li, S. Roux, C. Castelain, L. Luo and Y. Fan, “Tailoring the fluid flow distribution in a parallel mini-channel heat sink under multiple-peak heat flux,” Therm. Sci. Eng. Prog., vol. 29, pp. 101182, 2022. DOI: 10.1016/j.tsep.2021.101182.
  • M. A. Arie, A. H. Shooshtari, S. V. Dessiatoun, E. Al-Hajri and M. M. Ohadi, “Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger,” Int. J. Heat Mass Transf., vol. 81, pp. 478–489, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.10.022.
  • X. Rao, C. Jin, H. Zhang, J. Song and C. Xiao, “A hybrid microchannel heat sink with ultra-low pressure drop for hotspot thermal management,” Int. J. Heat Mass Transf., vol. 211, pp. 124201, 2023. DOI: 10.1016/j.ijheatmasstransfer.2023.124201.
  • K. P. Drummond, et al., “Characterization of hierarchical manifold microchannel heat sink arrays under simultaneous background and hotspot heating conditions,” Int. J. Heat Mass Transf., vol. 126, pp. 1289–1301, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.05.127.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.