Investigation of the flow-heat-vortex mechanism in hot, coolant and delivery channels in film cooling under strongly-coupled boundary conditions using direct numerical simulation

References

• K. Wieghardt, S. A. F. A., United, Hot-air Discharge for De-icing. Wright Field: Air Materiel Command, 1946, p. 44.
   Google Scholar
• J. Wang, P. Cui, B. Sundén and R. Yang, “Effects of deposition locations on film cooling with and without a mist injection,” Numer. Heat Trans. Part A: Appl., vol. 70, no. 10, pp. 1072–1086, 2016. DOI: 10.1080/10407782.2016.1230395.
   Web of Science ®Google Scholar
• G. J. VanFossen, “Heat-transfer coefficients for staggered arrays of short pin fins,” J Eng Gas Turbines Power, vol. 104, no. 2, pp. 268–274, 1982. DOI: 10.1115/1.3227275.
   Google Scholar
• E. Achenbach, “The effect of surface roughness on the heat transfer from a circular cylinder to the cross flow of air,” Int. J. Heat Mass Trans., vol. 20, no. 4, pp. 359–369, 1977. DOI: 10.1016/0017-9310(77)90157-0.
   Web of Science ®Google Scholar
• S. S. Pai and J. A. Weibel, “Neural net-based surrogate square pin fin correlations for thermal-fluid design optimization under developing flow conditions,” Numer. Heat Trans. Part B: Fundam., pp. 1–18, 2023. DOI: 10.1080/10407790.2023.2267173.
   Web of Science ®Google Scholar
• R. J. Goldstein, E. R. G. Eckert and F. Burggraf, “Effects of hole geometry and density on three-dimensional film cooling,” Int. J. Heat Mass Trans., vol. 17, no. 5, pp. 595–607, 1974. DOI: 10.1016/0017-9310(74)90007-6.
   Web of Science ®Google Scholar
• J. Andreopoulos and W. Rodi, “Experimental investigation of jets in a crossflow,” J. Fluid Mech., vol. 138, pp. 93–127, 1984. DOI: 10.1017/S0022112084000057.
   Web of Science ®Google Scholar
• K. Huang, J. Zhang, X. Tan and Y. Shan, “Experimental study on film cooling performance of imperfect holes,” Chin. J Aeronaut., vol. 31, no. 6, pp. 1215–1221, 2018. DOI: 10.1016/j.cja.2018.04.001.
   Web of Science ®Google Scholar
• B. Johnson, W. Tian, K. Zhang and H. Hu, “An experimental study of density ratio effects on the film cooling injection from discrete holes by using PIV and PSP techniques,” Int. J. Heat Mass Trans. vol. 76, pp. 337–349, 2014. DOI: 10.1016/j.ijheatmasstransfer.2014.04.028.
   Web of Science ®Google Scholar
• H. Nasir, S. Acharya and S. Ekkad, “Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations,” Int. J. Heat Fluid Fl., vol. 24, no. 5, pp. 657–668, 2003. DOI: 10.1016/S0142-727X(03)00082-1.
   Web of Science ®Google Scholar
• D. K. Walters and J. H. Leylek, “A detailed analysis of film-cooling physics: part I—streamwise injection with cylindrical holes,” J. Turbomach., vol. 122, no. 1, pp. 102–112, 2000. DOI: 10.1115/1.555433.
   Web of Science ®Google Scholar
• S. Inanli, I. Gorgulu, T. Okutucu and O. Uzol, “Flat plate film cooling performance predictions by RANS turbulence models, Thmt-12,” Proceedings of the Seventh International Symposium On Turbulence Heat and Mass Transfer, 2012, pp. 1262–1271.
   Google Scholar
• J. Ling, R. Rossi and J. K. Eaton, “Near wall modeling for trailing edge slot film cooling,” J. Fluids Eng., vol. 137, no. 2, pp. 21103, 2015. DOI: 10.1115/1.4028498.
   Web of Science ®Google Scholar
• M. G. Ghorab, “Adiabatic and conjugate cooling effectiveness analysis of a new hybrid scheme,” Int. J. Therm. Sci., vol. 50, no. 6, pp. 965–983, 2011. DOI: 10.1016/j.ijthermalsci.2011.01.012.
   Web of Science ®Google Scholar
• Z. Ke and J. Wang, “Conjugate heat transfer simulations of pulsed film cooling on an entire turbine vane,” Appl. Therm. Eng., vol. 109, pp. 600–609, 2016. DOI: 10.1016/j.applthermaleng.2016.08.132.
   Web of Science ®Google Scholar
• J. Kim and K. Kim, “Film-cooling performance of converged-inlet hole shapes,” Int. J. Therm. Sci., vol. 124, pp. 196–211, 2018. DOI: 10.1016/j.ijthermalsci.2017.10.014.
   Web of Science ®Google Scholar
• W. Li, X. Li, J. Ren and H. Jiang, “Large eddy simulation of compound angle hole film cooling with hole length-to-diameter ratio and internal crossflow orientation effects,” Int. J. Therm. Sci., vol. 121, pp. 410–423, 2017. DOI: 10.1016/j.ijthermalsci.2017.08.001.
   Web of Science ®Google Scholar
• S. I. Baek and J. Ahn, “Large eddy simulation of film cooling with bulk flow pulsation: comparative study of LES and RANS,” Appl. Sci., vol. 10, no. 23, pp. 8553, 2020. DOI: 10.3390/app10238553.
   Google Scholar
• Z. Chen, J. Zhan, C. Li, W. Hu and Y. Gong, “The effect of vortex shedding in film-cooling processes,” Heat Trans. Eng., vol. 42, no. 17, pp. 1432–1451, 2021. DOI: 10.1080/01457632.2020.1800260.
   Web of Science ®Google Scholar
• W. Fu, W. Chao, M. Tsubokura, C. Li and W. Wang, “Direct numerical simulation of film cooling with a fan-shaped hole under low Reynolds number conditions,” Int. J. Heat Mass Trans., vol. 123, pp. 544–560, 2018. DOI: 10.1016/j.ijheatmasstransfer.2018.03.011.
   Web of Science ®Google Scholar
• T. Yu, D. Wang, H. Li and H. Xu, “Direct numerical simulation capability for strongly-coupled fluid-solid heat transfer in film-cooling structures,” Int. J. Heat Mass Trans., vol. 138, pp. 750–761, 2019. DOI: 10.1016/j.ijheatmasstransfer.2019.04.061.
   Web of Science ®Google Scholar
• H. V. Helmholtz, “Über Integrale der hydrodynamischen Gleichungen, welche den Wirbelbewegungen entsprechen,” Journal für die reine und angewandte Mathematik., vol. 1858, no. 55, pp. 25–55, 1858. DOI: 10.1515/crll.1858.55.25.
   Google Scholar
• S. K. Robinson, “Coherent motions in the turbulent boundary layer,” Annu. Rev. Fluid Mech., vol. 23, no. 1, pp. 601–639, 1991. DOI: 10.1146/annurev.fl.23.010191.003125.
   Web of Science ®Google Scholar
• J. C. Hunt, A. A. Wray and P. Moin, “Eddies, streams, and convergence zones in turbulent flows, Studying Turbulence Using Numerical Simulation Databases, 2,” Proceedings of the 1988 Summer Program, 1988.
   Google Scholar
• J. Jeong and F. Hussain, “On the identification of a vortex,” J. Fluid. Mech., vol. 285, pp. 69–94, 1995. DOI: 10.1017/S0022112095000462.
   Web of Science ®Google Scholar
• M. S. Chong, A. E. Perry and B. J. Cantwell, “A general classification of three‐dimensional flow fields,” Phys. Fluids a: Fluid Dynam., vol. 2, no. 5, pp. 765–777, 1990. DOI: 10.1063/1.857730.
   Web of Science ®Google Scholar
• J. Zhou, R. J. Adrian, S. Balachandar and T. M. Kendall, “Mechanisms for generating coherent packets of hairpin vortices in channel flow,” J. Fluid Mech., vol. 387, pp. 353–396, 1999. DOI: 10.1017/S002211209900467X.
   Web of Science ®Google Scholar
• C. Liu, et al., “Third generation of vortex identification methods: omega and Liutex/Rortex based systems,” J. Hydrodyn., vol. 31, no. 2, pp. 205–223, 2019. DOI: 10.1007/s42241-019-0022-4.
   Web of Science ®Google Scholar
• X. Dong, Y. Gao and C. Liu, “New normalized Rortex/vortex identification method,” Phys. Fluids, vol. 31, no. 1, pp. 011701, 2019, DOI: 10.1063/1.5066016.
   Web of Science ®Google Scholar
• H. Xu, X. Cai and C. Liu, “Liutex (vortex) core definition and automatic identification for turbulence vortex structures,” J Hydrodyn, vol. 31, no. 5, pp. 857–863, 2019. DOI: 10.1007/s42241-019-0066-5.
   Web of Science ®Google Scholar
• W. Yang, X. Shi and J. Zhang, “Experimental investigation on film cooling characteristics of ellipse-shaped tab,” Exp. Therm. Fluid Sci., vol. 81, pp. 277–290, 2017. DOI: 10.1016/j.expthermflusci.2016.10.018.
   Web of Science ®Google Scholar
• F. Muldoon and S. Acharya, “DNS study of pulsed film cooling for enhanced cooling effectiveness,” Int. J. Heat Mass Trans., vol. 52, no. 13-14, pp. 3118–3127, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.01.030.
   Web of Science ®Google Scholar
• R. Mittal and G. Iaccarino, “Immersed boundary methods,” Annu. Rev. Fluid Mech., vol. 37, no. 1, pp. 239–261, 2005. DOI: 10.1146/annurev.fluid.37.061903.175743.
   Web of Science ®Google Scholar
• H. Xu, W. Yuan and M. Khalid, “Design of a high-performance unsteady Naiver–Stokes solver using a flexible-cycle additive-correction multigrid technique,” J. Comput. Phys., vol. 209, no. 2, pp. 504–540, 2005. DOI: 10.1016/j.jcp.2005.03.029.
   Web of Science ®Google Scholar
• P. Moin and K. Mahesh, “Direct numerical simulation: a tool in turbulence research,” Annu Rev Fluid Mech., vol. 30, no. 1, pp. 539–578, 1998. DOI: 10.1146/annurev.fluid.30.1.539.
   Web of Science ®Google Scholar
• R. Courant, K. Friedrichs and H. Lewy, “Über die partiellen Differenzengleichungen der mathematischen Physik,” Math. Ann., vol. 100, no. 1, pp. 32–74, 1928. DOI: 10.1007/BF01448839.
   Google Scholar
• F. Bashforth and J. C. Adams, An Attempt to Test the Theories of Capillary Action by Comparing the Theoretical and Measured Forms of Drops of Fluid. Cambridge University Press, Cambridge, UK, 1883.
   Google Scholar
• J. Kim and P. Moin, “Application of a fractional-step method to incompressible Navier-Stokes equations,” J. Comput. Phys., vol. 59, no. 2, pp. 308–323, 1985. DOI: 10.1016/0021-9991(85)90148-2.
   Web of Science ®Google Scholar
• J. Wang, C. Gu and B. A. Sunden, “Conjugated heat transfer analysis of a film cooling passage with different rib configurations,” Int. J. Numer. Method H, vol. 25, no. 4, pp. 841–860, 2015. DOI: 10.1108/HFF-04-2014-0110.
   Google Scholar
• C. Liu, Y. Gao, S. Tian and X. Dong, “Rortex-A new vortex vector definition and vorticity tensor and vector decompositions,” Phys. Fluids, vol. 30, no. 3, pp. 035103, 2018. DOI: 10.1063/1.5023001.
   Web of Science ®Google Scholar
• Y. Gao and C. Liu, “Rortex and comparison with eigenvalue-based vortex identification criteria,” Phys. Fluids, vol. 30, no. 8, pp. 085107, 2018. DOI: 10.1063/1.5040112.
   Web of Science ®Google Scholar
• S. Na and T. I. Shih, “Increasing adiabatic film-cooling effectiveness by using an upstream ramp,” ASME J. Heat Mass Trans., vol. 129, no. 4, pp. 464–471, 2007. DOI: 10.1115/1.2709965.
   Web of Science ®Google Scholar
• R. Zhu, T. W. Simon and G. Xie, “Influence on film cooling effectiveness of novel holes based on cylindrical configurations,” Numer. Heat Trans., Part A: Appl., vol. 75, no. 7, pp. 469–488, 2019. DOI: 10.1080/10407782.2019.1606629.
   Web of Science ®Google Scholar
• S. Acharya and D. Houston Leedom, “Large eddy simulations of discrete hole film cooling with plenum inflow orientation effects,” J. Heat Trans., vol. 135, no. 1, pp. 11010, 2013. DOI: 10.1115/1.4007667.
   Web of Science ®Google Scholar
• S. Dai, et al., “Film-cooling of cylindrical hole with downstream surface dielectric barrier discharge actuators,” Int. J. Heat Mass Trans., vol. 90, pp. 825–837, 2015. DOI: 10.1016/j.ijheatmasstransfer.2015.07.007.
   Web of Science ®Google Scholar
• S. Yamawaki, et al., Anti-kidney pair of vortices in shaped holes and their influence on film cooling effectiveness, Proceedings of the ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, Citeseer,1997. p. 1.
   Google Scholar
• Z. Wang, J. Liu and C. Zhang, “Impacts of geometric parameters of double-jet film cooling on anti-kidney vortex structure and cooling effectiveness”, Turbo Expo: power for Land, Sea, and Air. American Society of Mechanical Engineers, 2013. 55157 V03BT13A002. DOI: 10.1115/GT2013-94038.
   Google Scholar
• H. Li, D. Wang and H. Xu, “Improved law-of-the-wall model for turbulent boundary layer in engineering,” AIAA J., vol. 58, no. 8, pp. 3308–3319, 2020. DOI: 10.2514/1.J058464.
   Google Scholar