Temperature field analysis of tangential clearance leakage flow for scroll compressor based on fuzzy ridgelet finite element method

References

• A. J. Jackson, A. P. S. Wheeler, and R. W. Ainsworth, “An experimental and computational study of tip clearance effects on a transonic turbine stage,” Int. J. Heat Fluid Flow, vol. 56, pp. 335–343, 2015. DOI: 10.1016/j.ijheatfluidflow.2015.09.001.
   Web of Science ®Google Scholar
• M. Colakoglu, T. Tanbay, A. Durmayaz, and O. S. Sogut, “Effect of heat leakage on the performance of a twin-spool turbofan engine,” Int. J. Exergy, vol. 19, pp. 173–198, 2016. DOI: 10.1504/ijex.2016.075604.
   Web of Science ®Google Scholar
• J. Gao, Q. Zheng, X. Y. Niu, and G. Q. Yue, “Aerothermal characteristics of a transonic tip flow in a turbine cascade with tip clearance variations,” Appl. Therm. Eng., vol. 107, pp. 271–283, 2017. DOI: 10.1016/j.applthermaleng.2016.06.155.
   Web of Science ®Google Scholar
• L. C. Mendoza, S. Lemofouet, and J. Schiffmann, “Testing and modelling of a novel oil-free co-rotating scroll machine with water injection,” Appl. Energy, vol. 185, pp. 201–213, 2017. DOI: 10.1016/j.apenergy.2016.10.089.
   Web of Science ®Google Scholar
• S. M. Moosania and X. Q. Zheng, “Effect of internal heat leakage on the performance of a high pressure ratio centrifugal compressor,” Appl. Therm. Eng., vol. 111, pp. 317–324. 2017. DOI: 10.1016/j.applthermaleng.2016.09.030.
   Web of Science ®Google Scholar
• B. L. Gabriel, S. K. Tânia, and A. M. Ricardo de, “Assessment with computational fluid dynamics of the effects of baffle clearances on the shell side flow in a shell and tube heat exchanger,” Appl. Therm. Eng., vol. 112, pp. 497–506, 2017. DOI: 10.1016/j.applthermaleng.2016.10.097.
   Web of Science ®Google Scholar
• Y. Liu and A. J. Dick, “Alternating wavelet-time finite element method: modeling and analysis of nonlinear wave propagation in one and two-dimensional waveguides,” J. Sound Vib., vol. 367, pp. 185–202, 2016. DOI: 10.1016/j.jsv.2015.12.051.
   Web of Science ®Google Scholar
• Z. B. Yang et al., “Wave motion analysis and modeling of membrane structures using the wavelet finite element method,” Appl. Math. Modell., vol. 40, pp. 2407–2420, 2016. DOI: 10.1016/j.apm.2015.09.071.
   Web of Science ®Google Scholar
• Y. S. Erdogan and P. G. Bakir, “Inverse propagation of uncertainties in finite element model updating through use of fuzzy arithmetic,” Eng. Appl. Artif. Intell., vol. 26, pp. 357–367, 2013. DOI: 10.1016/j.engappai.2012.10.003.
   Web of Science ®Google Scholar
• H. Yin, D. J. Yu, S. W. Yin, and B. Z. Xia, “Fuzzy interval finite element/statistical energy analysis for mid-frequency analysis of built-up systems with mixed fuzzy and interval parameters,” J. Sound Vib., vol. 380, pp. 192–212, 2016. DOI: 10.1016/j.jsv.2016.06.008.
   Web of Science ®Google Scholar
• M. S. Chang et al., “Reliability evaluation of scroll compressor for system air conditioner,” J. Mech. Sci. Technol., vol. 30, pp. 4459–4463, 2016. DOI: 10.1007/s12206-016-0912-0.
   Web of Science ®Google Scholar
• Z. X. Wang et al., “Experimental evaluation of an integrated electric vehicle AC/HP system operating with R134a and R407C,” Appl. Therm. Eng., vol. 100, pp. 1179–1188, 2016. DOI: 10.1016/j.applthermaleng.2016.02.064.
   Web of Science ®Google Scholar
• K. George, M. Dimitris, and P. George, “Experimental investigation of a low-temperature organic Rankine cycle (ORC) engine under variable heat input operating at both subcritical and supercritical conditions,” Appl. Therm. Eng., vol. 92, pp. 1–7, 2016. DOI: 10.1016/j.applthermaleng.2015.09.082.
   Web of Science ®Google Scholar
• M. Silvia, M. Giulio, and C. Massimo, “Evaluation of heat transfer effects in small turbochargers by theoretical model and its experimental validation,” Energy, vol. 112, pp. 264–272, 2016. DOI: 10.1016/j.energy.2016.06.067.
   Web of Science ®Google Scholar
• J. M. Gorman, E. M. Sparrow, J. P. Abraham, and W. J. Minkowycz, “Evaluation of the efficacy of turbulence models for swirling flows and the effect of turbulence intensity on heat transfer,” Numer. Heat Transfer, Part B, vol. 70, pp. 485–502, 2016. DOI: 10.1080/10407790.2016.1244390.
   Web of Science ®Google Scholar
• L. X. Cheng and G. D. Xia, “Fundamental issues, mechanisms and models of flow boiling heat transfer in microscale channels,” Int. J. Heat Mass Transfer, vol. 108, pp. 97–127, 2017. DOI: 10.1016/j.ijheatmasstransfer.2016.12.003.
   Web of Science ®Google Scholar
• D. M. Joglekar and M. Mitra, “Analysis of flexural wave propagation through beams with a breathing crack using wavelet spectral finite element method,” Mech. Syst. Signal Process., vol. 76–77, pp. 576–591, 2016. DOI: 10.1016/j.ymssp.2016.02.010.
   Web of Science ®Google Scholar
• X. F. Xue, X. F. Chen, X. W. Zhang, and J. Geng, “Load identification in one dimensional structure based on hybrid finite element method,” Sci. China (Technol. Sci.), vol. 60, pp. 538–551, 2017. DOI: 10.1007/s11431-016-0507-5.
   Web of Science ®Google Scholar
• H. Chen, D. M. Cao, G. J. Wang, S. B. Wan, and Y. H. Li, “Fuzzy estimation for unknown boundary shape of fluid-solid conjugate heat transfer problem,” Int. J. Therm. Sci., vol. 106, pp. 112–121, 2016. DOI: 10.1016/j.ijthermalsci.2016.03.014.
   Web of Science ®Google Scholar