Thermo-distortion characteristics of spiral groove gas face seal at high temperature

References

• B. M. Steinetz, M. P. Proctor, and P. H. Dunlap, “Overview of NASA Glenn seal developments,” the 2003 NASA Seal/Secondary Air System Workshop, Cleveland, OH, USA, Nov. 5–6, 2003.
   Google Scholar
• J. P. Netzel, “High performance gas compressor seals,” in International Conference on Fluid Sealing. New York: Elsevier, 1987, pp. 532–547.
   Google Scholar
• C. H. Li, “Thermal deformation in a mechanical face seal,” Tribol. Trans., vol. 19, no. 2, pp. 146–152, 1976. DOI: 10.1080/05698197608982788.
   Google Scholar
• T. G. Doust and A. Parmar, “An experimental and theoretical study of pressure and thermal distortions in a mechanical seal,” Tribol. Trans., vol. 29, no. 2, pp. 151–159, 1986. DOI: 10.1080/05698198608981672.
   Google Scholar
• B. Tournerie, D. Reungoat, and J. Frêne, “Temperature measurement by infrared thermography in the interface of a radial face seal,” ASME J. Tribol., vol. 113, no. 3, pp. 571–576, 1991. DOI: 10.1115/1.2920661.
   Web of Science ®Google Scholar
• S. Blasiak, P. A. Laski, and J. E. Takosoglu, “Parametric analysis of heat transfer in non-contacting face seals,” Int. J. Heat Mass Transf., vol. 57, no. 1, pp. 22–31, 2013. DOI: 10.1016/j.ijheatmasstransfer.2012.09.058.
   Web of Science ®Google Scholar
• S. Blasiak, “An analytical approach to heat transfer and thermal distortions in non-contacting face seals,” Int. J. Heat Mass Transf., vol. 81, pp. 90–102, 2015. DOI: 10.1016/j.ijheatmasstransfer.2014.10.011.
   Web of Science ®Google Scholar
• S. Błasiak and C. Kundera, “A numerical analysis of the grooved surface effects on the thermal behavior of a non-contacting face seal,” Proc. Eng., vol. 39, pp. 315–326, 2012. DOI: 10.1016/j.proeng.2012.07.037.
   Google Scholar
• S. Blasiak, “Time-fractional heat transfer equations in modeling of the non-contacting face seals,” Int. J. Heat Mass Transf., vol. 100, pp. 79–88, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.04.040.
   Web of Science ®Google Scholar
• N. Brunetière, B. Tournerie, and J. Frêne, “TEHD lubrication of mechanical face seals in stable tracking mode: part 2-parametric study,” ASME J. Tribol., vol. 125, no. 3, pp. 617–627, 2003. DOI: 10.1115/1.1510886.
   Web of Science ®Google Scholar
• N. Brunetiere and A. Apostolescu, “A simple approach to the thermoelastohydrodynamic behavior of mechanical face seals,” Tribol. Trans., vol. 52, no. 2, pp. 243–255, 2009. DOI: 10.1080/10402000802441587.
   Web of Science ®Google Scholar
• A. P. Nyemeck, N. Brunetière, and B. Tournerie, “A multiscale approach to the mixed lubrication regime: application to mechanical seals,” Tribol. Lett., vol. 47, no. 3, pp. 417–429, 2012. DOI: 10.1007/s11249-012-9997-5.
   Web of Science ®Google Scholar
• A. P. Nyemeck, N. Brunetière, and B. Tournerie, “A mixed thermoelastohyrodynamic lubrication analysis of mechanical face seals by a multiscale approach,” Tribol. Trans., vol. 58, no. 5, pp. 836–848, 2015. DOI: 10.1080/10402004.2015.1023407.
   Web of Science ®Google Scholar
• S. Thomas, N. Brunetière, and B. Tournerie, “Numerical modeling of high pressure gas face seals,” ASME J. Tribol., vol. 128, no. 2, pp. 396–405, 2006. DOI: 10.1115/1.2164471.
   Web of Science ®Google Scholar
• S. Thomas, N. Brunetière, and B. Tournerie, “Thermoelastohydrodynamic behavior of mechanical gas face seals operating at high pressure,” ASME J. Tribol., vol. 129, no. 4, pp. 841–850, 2007. DOI: 10.1115/1.2768086.
   Web of Science ®Google Scholar
• N. Brunetière, S. Thomas, and B. Tournerie, “The parameters influencing high-pressure mechanical gas face seal behavior in static operation,” Tribol. Trans., vol. 52, no. 5, pp. 643–654, 2009. DOI: 10.1080/10402000902874828.
   Web of Science ®Google Scholar
• S. X. Bai, C. H. Ma, X. D. Peng, and S. Z. Wen, “Thermoelastohydrodynamic behavior of gas spiral groove face seals operating at high pressure and speed,” ASME J. Tribol., vol. 137, no. 2, pp. 1–11, 2014.
   Web of Science ®Google Scholar
• C. H. Ma, S. X. Bai, and X. D. Peng, “Thermo-hydrodynamic characteristics of spiral groove gas face seals operating at low pressure,” Tribol. Int., vol. 95, pp. 44–54, 2016. DOI: 10.1016/j.triboint.2015.11.001.
   Web of Science ®Google Scholar
• S. X. Bai, “Thermoelastohydrodynamic gas lubrication of spiral-groove face seals: modeling and analysis of vapor condensation,” STLE Tribol. Trans., vol. 60, no. 4, pp. 719–728, 2017. DOI: 10.1080/10402004.2016.1206648.
   Web of Science ®Google Scholar
• Z. M. Fairuz, I. Jahn, and R. Abdul-Rahman, “The effect of convection area on the deformation of dry gas seal operating with supercritical CO2,” Tribol. Int., vol. 137, pp. 349–365, 2019. DOI: 10.1016/j.triboint.2019.04.043.
   Web of Science ®Google Scholar
• W. J. Minkowycz and A. Haji-Sheikh, “Heat transfer in parallel plates and circular porous passages with axial conduction,” Int. J. Heat Mass Transf., vol. 49, no. 13–14, pp. 2381–2390, 2006. DOI: 10.1016/j.ijheatmasstransfer.2005.10.032.
   Web of Science ®Google Scholar
• W. J. Minkowycz and A. Haji-Sheikh, “Asymptotic behaviors of heat transfer in porous passages with axial conduction,” Int. J. Heat Mass Transf., vol. 52, no. 13–14, pp. 3101–3108, 2009. DOI: 10.1016/j.ijheatmasstransfer.2009.01.032.
   Web of Science ®Google Scholar
• R. Hou, F. B. Wen, X. L. Tang, T. Cui, and S. T. Wang, “Improvement of film cooling performance by trenched holes on turbine leading-edge models,” Numer. Heat Transf. A Appl., vol. 76, no. 3, pp. 160–177, 2019. DOI: 10.1080/10407782.2019.1627832.
   Web of Science ®Google Scholar
• S. J. Dai, Y. Xiao, L. M. He, T. Jin, and Z. C. Zhao, “Film cooling from a cylindrical hole with parallel auxiliary holes influences,” Numer. Heat Transf. A Appl., vol. 69, no. 5, pp. 1–15, 2015.
   Web of Science ®Google Scholar
• J. F. Zhou, X. J. Wang, J. Li, and H. K. Lu, “CFD analysis of mist/air film cooling on a flat plate with different hole types,” Numer. Heat Transf. A Appl., vol. 71, no. 11, pp. 1123–1140, 2017. DOI: 10.1080/10407782.2017.1337994.
   Web of Science ®Google Scholar
• J. Wang, K. Tian, J. Luo, and B. Sunden, “Effect of hole configurations on film cooling performance,” Numer. Heat Transf. A Appl., vol. 75, no. 11, pp. 725–738, 2019. DOI: 10.1080/10407782.2019.1608762.
   Web of Science ®Google Scholar
• B. E. Poling, J. M. Prausnitz, and J. P. O’Connell, The Properties of Gases and Liquids, 5th ed., New York: McGraw-Hill, 2001.
   Google Scholar
• C. H. Whitson and M. R. Brulé, Phase Behavior. Richardson, TX: Henry L. Doherty Memorial Fund of AIME, Society of Petroleum Engineers, 2000.
   Google Scholar
• X. X. Ding and J. J. Lu, “Theoretical analysis and experiment on gas film temperature in a spiral groove dry gas seal under high speed and pressure,” Int. J. Heat Mass Transf., vol. 96, pp. 438–450, 2016. DOI: 10.1016/j.ijheatmasstransfer.2016.01.045.
   Web of Science ®Google Scholar