Heat transfer phenomena during thermal processing of liquid particulate mixtures—A review

References

• Abdullah A., Talib A. R. A., Jaafar A. A., Salleh M. A. M. and Chong W. T. (2010). The basics and issues of Thermochromic Liquid Crystal Calibrations. Exp. Therm. Fluid Sci. 34:1089–1121.
   Web of Science ®Google Scholar
• Alhamdan, A., Sastry, S. K. and Blaisdell, J. L. (1990). Natural convection heat transfer between water and an irregular-shaped particle. Trans. ASAE 33:620–624.
   Google Scholar
• Atherton, D. and Thorpe, R. H. (1980). The processing of canned fruits and vegetables. In: Technical Bulletin No. 4. (Eds.) Atherton, D. and Thorpe, R. H.; Page no: 1-65. Campden Food Preservation Research Association, Chipping Campden, Gloucestershire, UK, pg. 1–65.
   Google Scholar
• Awuah, G. B., Khurana, A., Weddig, L. M. and Balestrini, C. G. (2007a). A comparative study of heat penetration data using remote sensors and needle or rod-in-tube thermocouples. J. Food Process Eng. 30:458–471.
   Web of Science ®Google Scholar
• Awuah, G. B., Ramaswamy, H. S. and Economides, A. (2007b). Thermal processing and quality: Principles and overview. Chem. Eng. Process. 46:584–602.
   Web of Science ®Google Scholar
• Awuah, G. B., Ramaswamy, H. S. and Simpson, B. K. (1995). Comparison of two methods for evaluating fluid to-surface heat transfer coefficients. Food Res. Int. 28:261–271.
   Web of Science ®Google Scholar
• Balasubramaniam, V. M. and Sastry, S. K. (1994a). Liquid-to-particle heat transfer in a continuous flow through a horizontal scraped surface heat exchanger. Trans IChemE. 72:189–196.
   Google Scholar
• Balasubramaniam, V. M. and Sastry, S. K. (1994b). Liquid-to-particle convective heat transfer in non-Newtonian carrier medium during continuous tube flow. J Food Eng. 23:169–187.
   Web of Science ®Google Scholar
• Balasubramaniam, V. M. and Sastry, S. K. (1994c). Method for non-invasive estimation of convective heat transfer coefficients in continuous flow. Am. Soc. Agric. Eng., Paper No. 946543:1–11.
   Google Scholar
• Balasubramaniam, V. M. and Sastry, S. K. (1995). Use of liquid crystals as temperature sensors in food processing research. J. Food Eng. 26:219–230.
   Web of Science ®Google Scholar
• Ball, C. O. (1923). Thermal process times for canned foods. Bull. Natl. Res. Counc. (U. S.) 7:1–76.
   Google Scholar
• Ball, C. O. and Olson, F. C. W. (1957). Sterilization in Food Technology. McGraw-Hill, New York, NY, USA.
   Google Scholar
• Barrett, D. M., Somogyi, L. and Ramaswamy, H. S. (2004). Processing Fruits: Science and Technology. CRC Press, Boca Raton, FL, USA.
   Google Scholar
• Bee, G. R. and Park, D. K. (1978). Heat penetration measurement for thermal process design. Food Technol. 32:56–58.
   Web of Science ®Google Scholar
• Berry, M. R. and Bradshaw, J. G. (1980). Heating characteristic of condensed cream of celery soup in a steritort: Heat penetration and spore count reduction. J. Food Sci. 45:869–874.
   Web of Science ®Google Scholar
• Berry, M. R. and Kohnhorst, A. L. (1983). Critical factors for thermal processing of institutional pouches. J. Food Prot. 46:487–489.
   Web of Science ®Google Scholar
• Berry, M. R. and Kohnhorst, A. L. (1985). Heating characteristic of homogeneous milk based formulas in cans processed in an agitating retort. J. Food Sci. 50:209–214.
   Web of Science ®Google Scholar
• Bhamidipati, S. and Singh, R. K. (1994). Fluid to particle heat transfer coefficient determination in a continuous system. Am. Soc. Agric. Eng. Paper No. 946542:1–13.
   Google Scholar
• Bhamidipati, S. and Singh, R. K. (1995). Determination of fluid particle convective heat transfer coefficient. Trans. ASAE 38:857–862.
   Google Scholar
• Breidt, F., Hayes, J. and McFeeters, R. F. (2007). Determination of 5-log reduction times for food pathogens in acidified cucumbers during storage at 10 and 25 degrees C. J Food Prot. 70:2638–2641.
   PubMed Web of Science ®Google Scholar
• Britt, I., Zhang, Z. and Tung, M. A. (1997). Influence of temperature measuring systems on heat penetration results. Presented at: The Institute for Thermal Processing Specialists (IFTPS) Annual Meeting, November 18–20. Arlington, VA. Institute for Thermal Processing Specialists, Guelph (ON), Canada.
   Google Scholar
• Brown, K. L. (2000). Control of bacterial spores. Br. Med. Bull. 56:158–171.
   PubMed Web of Science ®Google Scholar
• Cariño-Sarabia, A. and Vélez-Ruiz, J. F. (2013). Evaluation of convective heat transfer coefficient between fluids and particles in suspension as food model systems for natural convection using two methodologies. J. Food Process Eng. 115:173–181.
   Web of Science ®Google Scholar
• CFPRA. (1997). Guidelines for the establishment of scheduled heat processes for low-acid foods. In: Technical Manual No. 3. Campden Food Preservation Research Association, Chipping Campden, Gloucestershire, UK, pp. 1–80.
   Google Scholar
• Chandarana, D. and Gavin, A. (1989). Modeling and heat transfer study of heterogeneous foods processed aseptically. Presented at: The First International Congress on Aseptic Processing Technologies, March 19–21, pp. 1–23. Indianapolis, IN. The First International Congress on Aseptic Processing Technologies, Indianapolis, IN, USA.
   Google Scholar
• Chandarana, D., Gavin, A. and Wheaton, F. W. (1990). Particle/Fluid Interface Heat Transfer under UHT Conditions at Low Particle/Fluid Relative Velocities. J. Food Process Eng. 13:191–206.
   Google Scholar
• Chang, S. Y. and Toledo, R. T. (1989). Heat transfer and simulated sterilization of particulate solids in a continuously flowing system. J. Food Sci. 54:1017–1023.
   Web of Science ®Google Scholar
• Chang, S. Y. and Toledo, R. T. (1990). Simultaneous determination of thermal diffusivity and heat transfer coefficient during sterilization of carrot dices in a packed bed. J. Food Sci. 55:199–205.
   Web of Science ®Google Scholar
• Chau, K. V. and Snyder, G. V. (1988). Mathematical model for temperature distribution of thermally processed shrimp. Trans. ASAE 31:608–612.
   Google Scholar
• Clifcorn, L. E., Peterson, G. T., Boyd, J. M. and O'Neil, J. H. (1950). A new principle for agitating in processing of canned foods. Food Technol. 4:450–460.
   Web of Science ®Google Scholar
• Conley, W., Kaap, L. and Shuhmann, L. (1951). The application of “End-Over-End” agitation to the heating and cooling of canned food products. Food Technol. 5:457–460.
   Web of Science ®Google Scholar
• Damay, L. and Pain, J. P. (1993). Mesure du coefficient d’ échange de chaleur entre une particule et un fluide en écoulement. Rapport du Diplôme d’ Etudes Approfondies en Génie des Procédes Industriels, Villetaneuse, France.
   Google Scholar
• De Cordt, S., Avila, S., Hendrickx, M. and Tobback, P. (1994). DSC and protein-based time-temperature indicators: Case study of α-amylase stabilized by polyols and/or sugar. Biotech. Bioeng. 44:859–865.
   PubMed Web of Science ®Google Scholar
• De Cordt, S., Hendrickx, M., Maesmans, G. and Tobback, P. (1992). Immobilized α-amylase from Bacillus licheniformis: A potential enzymic indicator for thermal processing. Int. J. Food Sci. Technol. 27:661–673.
   Web of Science ®Google Scholar
• Deniston, M. F., Hassan, B. H. and Merson, R. L. (1987). Heat Transfer Coefficients to Liquids with Food Particles in Axially Rotating Cans. J. Food Sci. 52:962–966.
   Web of Science ®Google Scholar
• Dwivedi, M. (2008). Heat Transfer to Canned Newtonian Liquid-Particulate Mixture Subjected to Axial Agitation Processing. Doctoral dissertation, McGill University, Montreal, Canada.
   Google Scholar
• Dwivedi, M. and Ramaswamy, H. S. (2010a). Comparison of heat transfer rates during thermal processing under end-over-end and axial modes of rotation. LWT - Food Sci. Technol. 43:350–360.
   Web of Science ®Google Scholar
• Dwivedi, M. and Ramaswamy, H. S. (2010b). Comparative study of wireless versus standard thermocouples for data gathering and analyses in rotary cookers. J. Food Process. Preserv. 34:557–574.
   Web of Science ®Google Scholar
• Ecklund, O. F. (1956). Correction factors for heat penetration thermocouples. Food Technol. 10:43–44.
   Web of Science ®Google Scholar
• Erdogdu, F. and Tutar, M. (2011). Velocity and temperature field characteristics of water and air during natural convection heating in cans. J. Food Sci. 76:119–129.
   Web of Science ®Google Scholar
• Fernandez, C. L., Rao, M. A., Rajavasireddi, S. P. and Sastry, S. K. (1988). Particulate heat transfer to canned snap beans in a steritort. J. Food Process Eng. 10:183–198.
   Google Scholar
• Francesco, M. and Vittorio, R. (2003). Industrial assessment and control of canned food sterilization. Presented at: AIChE Annual Meeting, November, 16–21. San Francisco, CA, USA. American Institute of Chemical Engineers, New York, NY.
   Google Scholar
• Gadonna, J. P., Pain, J. P. and Barigou, M. (1996). Determination of the convective heat transfer coefficient between a free particle and a conveying fluid in a horizontal pipe. Food Bioprod. Process. 74:27–39.
   Web of Science ®Google Scholar
• Ghiron, K. and Litchfield, J. B. (1997). Magnetic thermometry in the aseptic processing of multiphase foods. In: Engineering and Food at ICEF 7, pp. 77–80. Jowitt, R., Ed., Sheffeld Academic Press, Sheffeld, UK.
   Google Scholar
• Gillespy, T. G. (1953). Estimation of the sterilizing values of processes as applied to canned foods. II – Packs heating by conduction: Complex processing conditions and value of coming-up time of retort. J. Sci. Food Agric. 4:553–565.
   Web of Science ®Google Scholar
• Guiavarc'h, Y. P., Deli, V., Van Loey, A. M. and Hendrickx, M. E. (2002a). Development of an enzymic time temperature integrator for sterilization processes based on Bacillus licheniformis a-amylase at reduced water content. J. Food Sci. 67:285–291.
   Web of Science ®Google Scholar
• Guiavarc'h, Y. P., Dintwa, E., Van Loey, A. M., Zuber, F. T. and Hendrickx, M. E. (2002b). Validation and use of an enzymic time-temperature integrator to monitor thermal impacts inside a solid/liquid model. Food. Biotechnol. Progr. 18:1087–1094.
   PubMed Web of Science ®Google Scholar
• Gultekin, D. H. and Gore, J. C. (2006). Measurement of thermal diffusivity by magnetic resonance imaging. Magn. Reson. Imaging 24:1203–1207.
   PubMed Web of Science ®Google Scholar
• Gultekin, D. H. and Gore, J. C. (2008). Measurement of heat transfer coefficients by nuclear magnetic resonance. Magn. Reson. Imaging 26:1323–1328.
   PubMed Web of Science ®Google Scholar
• Haentjens, T. H., Van Loey, A. M., Hendrickx, M. E. and Tobback, P. P. (1998). The use of a-amylase at reduced water content to develop time temperature integrators for sterilization processes. Lebensm.-Wiss. Technol. 31:467–472.
   Web of Science ®Google Scholar
• Hassan, B. H. (1984). Heat Transfer Coefficients for Particles in Liquid in Axially Rotating Cans. Doctoral dissertation, University of California, Davis, CA, USA.
   Google Scholar
• Hassan, H. F. and Ramaswamy, H. S. (2013). Bio-validation of bi-axial rotary thermal processing. LWT - Food Sci. Technol. 53(2):418–425.
   Web of Science ®Google Scholar
• Hassan, H. F., Ramaswamy, H. S. and Dwivedi, M. (2012). Overall and fluid-to-particle heat transfer coefficients associated with canned particulate non-newtonian fluids during free bi-axial rotary thermal processing. Int. J. Food Eng. 40:1–24.
   Google Scholar
• Hayakawa, K. (1964). Development of Formulas for Calculating the Theoretical Temperature History and Sterilizing Value in a Cylindrical Can of Thermally Conductive Food During Heating. Doctoral dissertation, Rutgers State University, New Brunswick, NJ, USA.
   Google Scholar
• Heinz, G. and Hautzinger, P. (2007). Meat Processing Technology for Small-to Medium-Scale Producers. RAP (Food and Agriculture Organization of the United Nations) Publication, Bangkok, Thailand.
   Google Scholar
• Hendrickx, M., Maesmans, G., De Cordt, S., Noronha, J., Van Loey, A. and Tobback, P. (1995). Evaluation of the integrated time-temperature effect in thermal processing of foods. Crit. Rev. Food Sci. Nutr. 35:231–262.
   PubMed Web of Science ®Google Scholar
• Hersom, A. C. and Hulland, E. D. (1980). Canned Foods: Thermal Processing and Microbiology. 7th ed. Churchill-Livingstone, Edinburgh, London, UK.
   Google Scholar
• Holdsworth, S. and Simpson, R. (2007). Thermal Processing of Packaged Foods. 2nd ed. Springer, New York, USA.
   Google Scholar
• Hotani, S. and Mihori, T. (1983). Some thermal engineering aspects of the rotation method in sterilization. In: Heat Sterilization of Food, pp. 121–129. Motohito, T. and Hayakawa, K. I., Eds., Koseisha-Koseikaku Co. Ltd., Tokyo, Japan.
   Google Scholar
• IFTPS. (1992). Temperature Distribution Protocol for Processing in Steam Still Retorts, Excluding Crateless Retorts. Institute for Thermal Processing Specialists, Fairfax, VA, USA.
   Google Scholar
• Institut-Appert. (1979). Barèmes de Sterilisation pour Aliments Appertisés. Institut Appert., Paris, France.
   Google Scholar
• James, P. W., Hughes, J. P., Jones, T. E. R. and Tucker, G. S. (2006). Numerical Simulations of Non-Isothermal Flow in Off-Axis Rotation of a Can Containing a Headspace Bubble. Chem. Eng. Res. Des. 84:311–318.
   Google Scholar
• Joseph, S. J., Speers, R. A. and Pillay, V. (1996). Effect of Head Space Variation and Heat Treatment On the Thermal and Rheological Properties of Nonagitated, Conduction Heated Materials. LWT - Food Sci. Technol. 29:556–560.
   Google Scholar
• Kakade, V. U., Lock, G. D., Wilson, M., Owen, J. M. and Mayhew, J. E. (2009). Accurate heat transfer measurements using thermochromic liquid crystal. Part 1: Calibration and characteristics of crystals. Int. J. Heat Fluid Flow. 30:939–949.
   Web of Science ®Google Scholar
• Khurana, A., Awuah, G. B., Weddig, L. M., Balestrini, C. G., Podolak, R. and Shafer, B. D. (2009). Heat penetration parameters as influenced by needle thermocouples and remote temperature sensors in 211´300 three-piece can size. J. Food Process Eng. 32:855–880.
   Web of Science ®Google Scholar
• Larousse, J. and Brown, B. (1996). Heat Penetration in Canned Foods - Theoretical Considerations. In: Food Canning Technology, pp. 383–423. Larousse, J. and Brown, B., Eds., Wiley-VCH, New York, USA.
   Google Scholar
• Lekwauwa, A. N. and Hayakawa, K. I. (1986). Computerized model for the prediction of thermal responses of packaged solid-liquid food mixture undergoing thermal processes. J. Food Sci. 51:1042–1049.
   Web of Science ®Google Scholar
• Lenz, M. K. and Lund, D. B. (1978). The lethality-Fourier number method heating rate variations and lethality confidence intervals for forced-convection heated foods in containers. J. Food Process Eng. 2:227–271.
   Google Scholar
• Lesley, D. R. (1987). Update on Ball Electronic Systems Division's (BESD) detraces temperature environment measurement system as applied to food thermal processing. Presented at The IFTPS Annual meeting, Anaheim, California, USA. 4–6 November 1987. Institute for Thermal Processing Specialists, Guelph (ON), Canada.
   Google Scholar
• Maesmans, G., Hendrickx, M., De Cordt, S. and Tobback, P. (1993). Theoretical considerations on design of multicomponent time temperature integrators in evaluation of thermal processes. J. Food Process. Preserv. 17:369–389.
   Web of Science ®Google Scholar
• Maesmans, G., Hendrickx, M., De Cordt, S. and Tobback, P. (1994). Feasibility of the use of a time–temperature integrator and a mathematical model to determine fluid-to-particle heat transfer coefficients. Food Res. Int. 27:39–51.
   Web of Science ®Google Scholar
• May, N. (1997). Guidelines for Performing Heat Penetration Trials for Establishing Thermal Processes in Batch Retort Systems (Guideline No. 16). Campden and Chorleywood Food Research Association, Chipping Campden, Gloucestershire, UK.
   Google Scholar
• Meng, Y. (2006). Heat Transfer Studies on Canned Particulate Viscous Fluids during End-Over-End Rotation. Doctoral dissertation, McGill University, Montreal, Canada.
   Google Scholar
• Meng, Y. and Ramaswamy, H. S. (2005). Heat transfer coefficients associated with canned particulate/non-Newtonian fluid (CMC) system during end-over-end rotation. Food Bioprod. Process. 83:229–237.
   Web of Science ®Google Scholar
• Meng, Y. and Ramaswamy, H. S. (2007a). Effect of system variables on heat transfer to canned particulate non-Newtonian fluids during end-over-end rotation. Food Bioprod. Process. 85:34–41.
   Web of Science ®Google Scholar
• Meng, Y. and Ramaswamy, H. S. (2007b). System variables affecting heat transfer in a canned particle in Newtonian fluid system during end-over-end rotation. LWT-Food Sci. Technol. 40:1240–1245.
   Web of Science ®Google Scholar
• Mohamed, I. O. (2007). Determination of an effective heat transfer coefficients for can headspace during thermal sterilization process. J. Food Eng. 79:1166–1171.
   Web of Science ®Google Scholar
• Montville, T. J. and Sapers, G. M. (1981). Thermal resistance of spores from pH elevating strains of Bacillus licheniformis. J. Food Sci. 46:710–1712.
   Web of Science ®Google Scholar
• Mwangi, J. M., Rizvi, S. S. H. and Datta, A. K. (1993). Heat transfer to particles in shear flow: Application in aseptic processing. J. Food Eng. 19:55–74.
   Web of Science ®Google Scholar
• National Canners Association Research Laboratories. (1968). Laboratory Manual for Food Canners and Processors. AVI Pub. Co., Westport, CT, USA.
   Google Scholar
• Naveh, D. and Kopelman, I. J. (1980). Effect of some processing parameters on the heat transfer coefficients in a rotating autoclave. J. Food Process. Preserv. 4:67–77.
   Web of Science ®Google Scholar
• Nelson, P. and Tressler, D. (1980). Fruit and Vegetable Juice Processing Technology. AVI Pub. Co., Westport, CT, USA.
   Google Scholar
• NFPA. (1971). Processes for Low-Acid Canned Foods in Glass Containers. Bulletin 30-L. National Food Processors' Association, Washington, DC, USA.
   Google Scholar
• NFPA. (1982). Processes for Low-Acid Canned Foods in Metal Containers. Bulletin 26-L, 12th ed. National Food Processors' Association, Washington, DC, USA.
   Google Scholar
• NFPA. (1985). Guidelines for Thermal Process Development for Foods Packaged in Flexible Containers. National Food Processors' Association, Washington, DC, USA.
   Google Scholar
• Ochoa, A. D., Baughn, J. W. and Byerley, A. R. (2005). A new technique for dynamic heat transfer measurements and flow visualization using liquid crystal thermography. Int. J. Heat Fluid Flow 26:264–275.
   Web of Science ®Google Scholar
• Odlaug, T. E. and Pflug, I. J. (1997). Clostridium Botulinum and Acid Foods. J Food Prot. 41:566–573.
   Google Scholar
• Pflug, I. J. (2003). Microbiology and Engineering of Sterilization Processes. 11th ed. Environmental Sterilization Laboratory, Minneapolis, MN, USA.
   Google Scholar
• Pflug, I. J., Jones, A. T. and Blanchett, R. (1980a). Performance of bacterial spores in a carrier system in measuring the Fo-value delivered to cans of food heated in a steritort. J. Food Sci. 45:940–945.
   Web of Science ®Google Scholar
• Pflug, I. J., Smith, G., Holcomb, R. and Blanchett, R. (1980b). Measuring sterilizing values in containers of food using thermocouples and biological indicator units. J. Food Prot. 43:119–123.
   Web of Science ®Google Scholar
• Pham, Q. T. (1989). Calculation of thermal process lethality for conduction-heated canned foods. J. Food Sci. 52:967–974.
   Web of Science ®Google Scholar
• Pratap Singh, A. and Ramaswamy, H. S. (2015). Effect of Can Orientation on Heat Transfer Coefficients Associated with Liquid Particulate Mixtures During Reciprocation Agitation Thermal Processing. Food Bioprocess Technol. 8:1405–1418.
   Google Scholar
• Pratap Singh, A. and Ramaswamy, H. S. (2016). Simultaneous optimization of heat transfer and reciprocation intensity for thermal processing of liquid particulate mixtures undergoing reciprocating agitation. Innov. Food Sci. Emerg. Technol. 33:405–415.
   Google Scholar
• Pratap Singh, A., Singh, A. and Ramaswamy, H. S. (2015). Modification of a static steam retort for evaluating heat transfer under reciprocating agitation thermal processing. J. Food Eng. 153:63–72.
   Google Scholar
• Pratap Singh, A., Singh, A. and Ramaswamy, H. S. (2016). Dimensionless correlations for heat transfer coefficients during reciprocating agitation thermal processing (RA-TP) of Newtonian liquid/particulate mixtures. Food Bioprod. Process. 97:76–87.
   Google Scholar
• Ramaswamy, H. S. and Abbatemarco, C. (1996). Thermal processing of fruits. In: Processing of Fruits - Science and Technology, Vol. 1. Somogyi, L. P., Ramaswamy, H. S. and Hui, Y. H., Eds., Technomic Publishing Company, Lancaster, Pennsylvania, USA, pp. 25–65.
   Google Scholar
• Ramaswamy, H. S., Awuah, G. B., Kim, H.-J. and Choi, Y.-M. (1996). Evaluation of a chemical marker for process lethality measurement at 110°C in a continuous flow holding tube. J. Food Proc. Preserv. 20:235–249.
   Web of Science ®Google Scholar
• Ramaswamy, H. S. and Grabowski, S. (1996). Influence of entrapped air on the heating behavior of a model food packaged in semi-rigid plastic containers during thermal processing. Lebensm.-Wiss. Technol. 29:82–93.
   Web of Science ®Google Scholar
• Ramaswamy, H. S., Lo, K. V. and Tung, M. A. (1982). Simplified Equations for Transient Temperatures in Conductive Foods with Convective Heat Transfer at the Surface. J. Food Sci. 47:2042–2047.
   Web of Science ®Google Scholar
• Ramaswamy, H. S. and Marcotte, M. (2005). Food Processing Principles and Applications. 1st ed. CRC Press, Boca Raton, FL, USA.
   Google Scholar
• Ramaswamy, H. S., Tung, M. A. and Stark, R. A. (1983). A method to measure surface heat transfer from steam/air mixtures in batch retorts. J. Food Sci. 48:900–904.
   Web of Science ®Google Scholar
• Rao, M. A. and Anantheswaran, R. C. (1988). Convective heat transfer to fluid foods in cans. Adv. Food Res. 32:39–84.
   Google Scholar
• Rodriguez, A. C. and Teixeira, A. A. (1988). Heat transfer in hollow cylindrical rods used as bioindicator units for thermal process validation. Trans. ASAE 31:1233–1236.
   Google Scholar
• Rönner, U. (2002). Validation of heat processes using bio-indicators (polymer beads). In: Second International Symposium on Thermal Processing – Thermal Processing: Validation Challenges (Session 2:3). Tucker, G. S., Ed., Campden and Chorleywood Food Research Association, Chipping Campden, Gloucestershire, UK.
   Google Scholar
• Sablani, S. S. (1996). Heat Transfer Studies of Liquid Particle Mixtures in Cans Subjected to End-Over-End Processing. Doctoral dissertation, McGill University, Montreal, Canada.
   Google Scholar
• Sablani, S. S. and Ramaswamy, H. S. (1995). Fluid-to-particle heat-transfer coefficients in cans during end-over-end processing. Lebensm. Wiss. Technol. 28:56–61.
   Web of Science ®Google Scholar
• Sablani, S. S. and Ramaswamy, H. S. (1996). Particle heat transfer coefficients under various retort operating conditions with end-over-end rotation. J. Food Process Eng. 19:403–424.
   Web of Science ®Google Scholar
• Sablani, S. S. and Ramaswamy, H. S. (1999). End-over-end agitation processing of cans containing liquid particle mixtures. Influence of continuous versus oscillatory rotation. J. Food Sci. Technol. 5:385–389.
   Web of Science ®Google Scholar
• Sastry, S. K., Beelman, R. B. and Speroni, J. J. (1985). A three-dimensional finite element model for thermally induced changes in foods: Application to degradation of agaritine in canned mushrooms. J. Food Sci. 50:1293–1299.
   Web of Science ®Google Scholar
• Sastry, S. K., Shen, G. Q. and Blaisdell, J. L. (1989). Effect of ultrasonic vibration on fluid-to-particle convective heat transfer coefficients. J. Food Sci. 54:229–230.
   Web of Science ®Google Scholar
• Sielaff, H. (1996). Technologie der Konservenherstellung. 12th ed. Behr's Verlag, Hamburg, Germany.
   Google Scholar
• Silva, C. L. M., Oliveira, F. A. R., Lamb, J., Torres, A. P. and Hendrickx, M. (1994). Experimental validation of models predicting optimal surface quality sterilization temperatures. Int. J. Food Sci. Technol. 29:227–241.
   Web of Science ®Google Scholar
• Singh, A., Pratap Singh, A. and Ramaswamy, H. S. (2015). Computational techniques used in heat transfer studies on canned liquid-particulate mixtures. Trends Food Sci. Technol. 43:83–103.
   Google Scholar
• Singh, A., Pratap Singh, A. and Ramaswamy, H. S. (2016). A Controlled Agitation Process for Improving Quality of Canned Green Beans during Agitation Thermal Processing. J. Food Sci. 81:E1399–E1411.
   Google Scholar
• Singh, A. and Ramaswamy, H. S. (2015). Effect of Can Orientation on Heat Transfer Coefficients Associated with Liquid Particulate Mixtures During Reciprocation Agitation Thermal Processing. J. Food Eng. 165:1–12.
   Google Scholar
• Smout, C., Avila, I., Loey, A. M. L., Hendrickx, M. E. G. and Silva, C. (2000). Influence of rotational speed on the statistical variability of heat penetration parameters and on non-uniformity of lethality in retort processing. J. Food Eng. 45:93–102.
   Web of Science ®Google Scholar
• Steele, R. J. and Board, P. W. (1979). Thermal process calculations using sterilizing ratios. J. Food Technol. 14:227–235.
   Web of Science ®Google Scholar
• Stoforos, N. G. (1988). Heat Transfer in Axially Rotating Canned Liquid/Particulate Food Systems. Doctoral dissertation, University of California, Davis CA, USA.
   Google Scholar
• Stoforos, N. G. and Merson, R. L. (1991). Measurement of heat transfer coefficients in rotating liquid/particulate systems. Biotechnol. Prog. 7:267–271.
   Web of Science ®Google Scholar
• Stoforos, N. G., Noronha, J., Hendrickx, M. and Tobback, P. (1997). Inverse superposition for calculating food product temperatures during in-container thermal processing. J. Food Sci. 62:219–224.
   Web of Science ®Google Scholar
• Stumbo, C. R. (1973). Thermobacteriology in Food Processing. 2nd ed. Academic Press, New York, USA.
   Google Scholar
• Stumbo, C. R., Purohit, K. S. and Ramakrishnan, T. V. (1975). Thermal process lethality guide for low-acid foods in metal containers. J. Food Sci. 40:1316–1323.
   Web of Science ®Google Scholar
• Tattiyakul, J., Rao, M. A. and Datta, A. K. (2002). Heat transfer to three canned fluids of different thermo-rheological behavior under intermittent agitation. Food Bioprod. Process. 80:20–27.
   Web of Science ®Google Scholar
• Tucker, G. S. (1999). A novel validation method: Application of time-temperature integrators to food pasteurization treatments. Food Bioprod. Process. 77:223–231.
   Web of Science ®Google Scholar
• Tucker, G. S. (2004). Improving rotary thermal processing. In: Improving the Thermal Processing of Foods, pp. 125–137. Richardson, P., Ed., CRC Press, Boca Raton, FL, USA.
   Google Scholar
• Van Loey, A., Guiavarc'h, Y., Claeys, W. and Hendrickx, M. (2004). The use of time temperature indicators (TTIs) to validate thermal processes. In: Improving the Thermal Processing of Foods, pp. 365–384. Richardson, P., Ed., Woodhead Publishing, Cambridge, London, UK.
   Google Scholar
• Van Loey, A. M., Haentjens, T. H., Hendrickx, M. E. and Tobback, P. P. (1997). The development of an enzymic time temperature integrator to assess the lethal efficacy of sterilization of low-acid canned foods. Food Biotech. 11:169–188.
   Web of Science ®Google Scholar
• Van Loey, A., Ludikhuyze, L., Hendrickx, M., De Cordt, S. and Tobback, P. (1995). Theoretical consideration on the influence of the z-value of a single component time temperature integrator on thermal process impact evaluation. J. Food Protect. 58:39–48.
   Google Scholar
• Van Loey, M. A. (1996). Enzymic Time Temperature Indicators for the Quantification of Thermal Processes in Terms of Food Safety. Doctoral dissertation, University of Leuven- KU Leuven, Belgium.
   Google Scholar
• Walden, R. and Emanuel, J. (2010). Developments in in-container retort technology: The Zinetec Shaka process. In: Case Studies in Novel Food Processing Technologies: Innovation in Processing, Packaging, and Predictive Modeling, pp. 359–406. Doona, C. J., Kustin, K. and Feeherry, F. E., Eds., Woodhead Publishing Ltd., Cambridge, UK.
   Google Scholar
• Wang, N., Zhang, N. and Wang, M. (2006). Wireless sensors in agriculture and food industry - Recent development and future perspective. Comput. Electron. Agric. 50:1–14.
   Web of Science ®Google Scholar
• Weng, Z. J., Hendrickx, M., Maesmans, G. and Tobback, P. (1992). The use of a time temperature integrator in conjunction with mathematical-modeling for determining liquid particle heat-transfer coefficients. J. Food Eng. 16:197–214.
   Web of Science ®Google Scholar
• Zitoun, K. B. and Sastry, S. K. (1994). Determination of convective heat transfer coefficient between fluid and cubic particles in continuous tube flow using non-invasive experimental techniques. J Food Process Eng. 17:209–228.
   Google Scholar