Status of pulse milling processes and technologies: A review

References

• Ali, N. (2004). Postharvest technology and value addition in pulses. In: Pulses in a New Perspective, pp. 530–543. Ali, M. Singh, B. B. Kumar, S. and Dhar, V., Eds., Indian Society of Pulses Research and Development, Indian Institute of Pulse Research, Kanpur, India.
   Google Scholar
• Altuntaş, E. and Yıldız, M. (2007). Effect of moisture content on some physical and mechanical properties of faba bean (Vicia faba L.) grains. J. Food Eng. 78:174–183.
   Web of Science ®Google Scholar
• Amarteifio, J. O. Munthali, D. C. Karikari, S. K. and Morake, T. K. (2002). The composition of pigeon pea (Cajanus cajan L. Millsp) grown in Botswana. Plant Foods Human Nutr. 57(2):173–177.
   PubMed Web of Science ®Google Scholar
• Amin, M. N. Hossain, M. A. and Roy, K. C. (2004). Effects of moisture content on some physical properties of lentil grains. J. Food Eng. 65:83–87.
   Web of Science ®Google Scholar
• Anthony, J. W. Bideaux, R. A. Bladh, K. W. and Nichols, M. C. (1997). Corundum. In: Handbook of Mineralogy: III (Halides, Hydroxides, Oxides), pp. 1–628. Chantilly, VA, US: Mineralogical Society of America.
   Google Scholar
• Asif, M. Rooney, L. W. Ali, R. and Riaz, M. N. (2013). Application and opportunities of pulses in food system: A review. Crit. Rev. Food Sci. Nutr. 53(11):1168–1179.
   PubMed Web of Science ®Google Scholar
• Belitz, H. D. Grosch, W. and Schieberle, P. (2009). Cereals and cereal products. In: Food Chemistry, pp. 670–675. Belitz, H. D. Grosch, W. and Schieberle, P., Eds., Springer, Berlin.
   Google Scholar
• Black, R. G. Singh, U. and Meares, C. (1998). Effect of genotype and pretreatment of field peas (Pisum sativum) on their dehulling and cooking quality. J. Sci. Food Agric. 77:251–258.
   Web of Science ®Google Scholar
• Bravo, L. Siddhuraju, P. and Calixto, F. S. (1999). Composition of underexploited Indian pulses: comparison with common legumes. Food Chem. 64:185–192.
   Web of Science ®Google Scholar
• Burridge, P. Hensing, A. and Petterson, D. (2001). Australian Pulse Quality Laboratory Manual. SARDI Grain Laboratory for GRDC, Urrabrae, Australia.
   Google Scholar
• Cosgrove, D. J. (1997). Assembly and enlargement of the primary cell wall in plants. Ann. Rev. Cell Dev. Biol. 13:171–201.
   PubMed Web of Science ®Google Scholar
• Dalgetty, D. D. and Baik, B. K. (2003). Isolation and characterization of cotyledon fibers from peas, lentils, and chickpeas. Cereal Chem. 80(1):310–315.
   Web of Science ®Google Scholar
• Darmadi-Blackberry, I. Wahlqvist, M. L. Steen, B. Horie, Y. and Horie, K. (2004). Legumes: The most important dietary predicator of survival in older people of different ethnicities. Clin. Nutr. 13(2):217–220.
   Web of Science ®Google Scholar
• Deshpande, S. D. Balasubramanya, R. H. Khan, S. and Bhat, D. K. (2007). Influence of premilling treatments on dal recovery and cooking characteristics of pigeon pea. J. Agric. Eng. 44(1):53–57.
   Google Scholar
• Dhingra, D. Michael, M. Rajput, H. and Patil, R. T. (2011). Dietary fibre in foods: a review. J. Food Sci. Technol. 49:255–266.
   PubMed Web of Science ®Google Scholar
• DAC. (2015). Agricultural statistics at a glance 2015. Directorate of Economics and Statistics, Department of Agriculture and Cooperation, Ministry of Agriculture, New Delhi, India.
   Google Scholar
• Ehiwe, A. O. F. and Reichert, R. D. (1987). Variability in dehulling quality of cowpea, pigeon pea, and mung bean cultivars determined with the tangential abrasive dehulling device. Cereal Chem. 64(2):86–90.
   Web of Science ®Google Scholar
• Ehiwe, A. O. F. Reichert, R. D. Schwab, D. J. Humbert, E. S. and Mazza, G. (1987). Effect of seed moisture content and temperature on the seed coat durability of field pea. Cereal Chem. 64:237–239.
   Web of Science ®Google Scholar
• Emami, S. S. T. (2007). Hydrocyclone fractionation of chickpea flour and measurement of physical and functional properties of flour and starch and protein fractions. Ph.D. Thesis, Department of Agricultural and Bioresource Engineering, University of Saskatchewan, Saskatoon, Canada.
   Google Scholar
• FAOstat. (2012). Food and Agriculture Organization of the United Nations, Rome, Italy. Available from http://www.fao.org. Accessed June 20, 2016.
   Google Scholar
• Gaur, P. M. Srinivasan, S. Suresh, K. Deepika, S. R. and Rao, B. V. (2012). Inheritance of natural seed-coat cracking in chickpea. J. Hered. 103(6):898–902.
   PubMed Web of Science ®Google Scholar
• Gharibzahedi, S. M. T. Emam-Djomeh, Z. Razavi, S. H. and Jafari, S.M. (2014). Mechanical behavior of lentil seeds in relation to their physicochemical and microstructural characteristics. Int. J. Food Prop. 17(3):545–558.
   Web of Science ®Google Scholar
• Ghasemlou, M. Khodaiyan, F. Gharibzahedi, S. M. T. Moayedi, A. and Keshavarz, B. (2010). Study on postharvest physico-mechanical and aerodynamic properties of mungbean [(Vigna radiate (L.) Wilczek] seeds. Int. J. Food Eng. 6(6):1–22.
   Web of Science ®Google Scholar
• Gopalan, C. Rama Sastri, B. V. and Balasubramanian, S. C. (2004). Nutritive Value of Indian Foods. National Institute of Nutrition, Indian Council of Medical Research, Hyderabad, India.
   Google Scholar
• Goyal, R. K. Wanjari, O. D. Ilyas, S. M. Vishwakarma, R. K. Manikantan, M. R. and Mridula, D. (2005). Pulse Milling Technologies. Technical Bulletin, CIPHET/Pub/2005. Central Institute of Post Harvest Engineering and Technology, Ludhiana, India.
   Google Scholar
• Goyal, R. K. Vishwakarma, R. K. and Wanjari, O. D. (2008). Optimisation of the pigeon pea dehulling process. Biosyst. Eng. 99:56–61.
   Web of Science ®Google Scholar
• Goyal, R. K. Vishwakarma, R. K. and Wanjari, O. D. (2009). Optimization of process parameters and mathematical modelling for dehulling of pigeonpea. Int. J. Food Sci. Technol. 44:36–41.
   Web of Science ®Google Scholar
• Goyal, R. K. Vishwakarma, R. K. and Wanjari, O. D. (2010). Effect of moisture content on pitting and milling efficiency of pigeon pea grain. Food Bioprocess Technol. 3:146–149.
   Web of Science ®Google Scholar
• Hacıseferoğullar, H. Gezer, I. Bahtiyarca, Y. and Mengeş, H. O. (2003). Determination of some chemical and physical properties of Sakız faba bean (Vicia faba L. Var. major). J. Food Eng. 60:475–479.
   Web of Science ®Google Scholar
• Hiregoudar, S. Sandeep, T. N. Nidoni, U. Shrestha, B. and Meda, V. (2014). Studies on dhal recovery from pre-treated pigeon pea (Cajanus cajan L.) cultivars. J. Food Sci. Technol. 51(5):922–928.
   PubMed Web of Science ®Google Scholar
• Ibáñez, A. M. Wood, D. F. Yokoyama, W. H. Park, I. M. Tinoco, M. A. et al. (2007). Viscoelastic properties of waxy and nonwaxy rice flours, their fat and protein-free starch, and the microstructure of their cooked kernels. J. Agric. Food Chem. 55:6761–6771.
   PubMed Web of Science ®Google Scholar
• Ikebudu, J. A. Sokhansanj, S. Tyler, R. T. Milne, B. J. and Thakor, N. S. (2000). Grain conditioning for dehulling of canola. Can. Agric. Eng. 42(1):27–32.
   Google Scholar
• Isik, E. and Unal, H. (2011). Some engineering properties of white kidney beans (Phaseolus vulgaris L.). Afr. J. Biotechnol. 10(82):19126–19136.
   Google Scholar
• Jha, S. N. Vishwakarma, R. K. Ahmad, T. Rai, A. and Dixit, A. K. (2015). Report on Assessment of Quantitative Harvest and Post-harvest Losses of Major Crops and Commodities in India. ICAR-All India Coordinated Research Project on Post-Harvest Technology, ICAR-CIPHET, Ludhiana, India.
   Google Scholar
• Joyner, J. J. and Yadav, B. K. (2015a). Microwave assisted dehulling of black gram (Vigna Mungo L.). J. Food Sci. Technol. 52(4):2003–2012.
   PubMed Web of Science ®Google Scholar
• Joyner, J. J. and Yadav, B. K. (2015b). Optimization of continuous hydrothermal treatment for improving the dehulling of black gram (Vigna mungo L). J. Food Sci. Technol. 52(12):7817–7827.
   PubMed Web of Science ®Google Scholar
• Kiani, D. K. M. Minaei, S. Maghsoudi, H. and Ghasemi, V. M. (2008). Moisture dependent physical properties of red bean (Phaseolus vulgaris L.) grains. Int. Agrophs. 22:231–237.
   Web of Science ®Google Scholar
• Konak, M. Arman, K. C. and Aydin, C. (2002). Physical properties of chick pea seeds. Biosyst. Eng. 82(1):73–78.
   Web of Science ®Google Scholar
• Kulkarni, S. D. (1989). Pulse processing machinery in India. Agric. Mech. Asia Afr. Latin Am. 20(2):42–48.
   Google Scholar
• Kuprits, Y. N. (1967). Grinding grain. In: Technology of grain processing and provender milling, pp. 189–223. Translation of Tekhnologiya pererabotki zema I kombikormovoe. Israel Program for Scientific Translations, Ministry of Higher and Secondary Specialized Education of the R.S.F.S.R., Jerusalem, Israel.
   Google Scholar
• Lal, R. R. and Verma, P. (2007). Post Harvest Management of Pulses. Indian Institute of Pulse Research, Kanpur, India.
   Google Scholar
• Le Goff, A. Renard, C. M. G. C. Bonnin, E. and Thibault, J. F. (2001). Extraction, purification and chemical characterisation of xylogalacturonans from pea hulls. Carbohydrate Polym. 45:325–334.
   Web of Science ®Google Scholar
• Liny, P. Manish, S. K. and Shashikala, M. (2013). Geometric and gravimetric characteristics of black gram. Int. J. Dev. Res. 3(9):13–16.
   Google Scholar
• Lucas, D. A. (2010). Effect of storage pre-treatments and conditions on the dehulling efficiency and cooking quality of red lentils. M.Sc. Thesis, Department of Food Science, University of Manitoba, Winnipeg, MB, Canada.
   Google Scholar
• Mandhyan, B. L. and Jain, S. K. (1992). Optimization of machine conditions for milling of pigeon pea. J. Food Eng. 18:91–96.
   Web of Science ®Google Scholar
• Mangaraj, S. and Singh, K. P. (2011). Optimization of machine parameters for milling of pigeon pea using RSM. Food Bioprocess Technol. 4:762–769.
   Web of Science ®Google Scholar
• MFPI. (2009). Annual Report 2009. Ministry of Food Processing Industries, Govt. of India, New Delhi, India.
   Google Scholar
• Moser, D. P. and Fielke, J. M. (1993). Evaluation of Grain Legume Decorticating Machinery. Agricultural Machinery Research and Design Center, School of Manufacturing and Mechanical Engineering, University of South Australia, Australia.
   Google Scholar
• Narasimha, H. V. Ramakrishnaiah, N. and Pratape, V. M. (2003). Milling of pulses. In: Handbook of Post Harvest Technology, pp. 427–454. Chakraverty, A. Mujumdar, A. S. Raghavan, G. S. V. and Ramaswamy, H. S., Eds., Marcel Dekker, Inc., New York, USA.
   Google Scholar
• Nikoobin, M. Mirdavardoost, F. Kashaninejad, M. and Soltani, A. (2009). Moisture-dependent physical properties of chickpea seeds. J. Food Process Eng. 32:544–564.
   Web of Science ®Google Scholar
• Nimkar, P. M. and Chattopadhyay, P. K. (2001). Some physical properties of green gram. J. Agric. Eng. Res. 80(2):183–189.
   Web of Science ®Google Scholar
• Obi, O. F. Anyadike, C. C. and Onyeke, C. O. (2014). Moisture-dependent physical properties of pigeon pea grown in Nigeria. World App. Sci. J. 31(8):1396–1405.
   Google Scholar
• Perera, A. M. (2001). Variability in recovery rate and quality of pigeon pea dhal produced by FMRC dhal processing machine. Ann. Sri Lanka Dep. Agric. 3:195–200.
   Google Scholar
• Phirke, P. S. and Bhole, N. G. (1999). The effect of pre-treatment on the strength and dehulling properties of pigeonpea grain. Int. J. Food Sci. Technol. 34(2):107–113.
   Web of Science ®Google Scholar
• Phirke, P. S. and Bhole, N. G. (2000). Pretreatment of pigeon pea grain for improvement of dulling characteristics. Int. J. Food Sci. Technol. 35:305–313.
   Web of Science ®Google Scholar
• Phirke, P. S. Bhole, N. G. and Adhaoo, S. H. (1995). Shear forces for dehulling, splitting and breaking raw and pretreated pigeon pea. Int. J. Food Sci. Technol. 30:485–491.
   Web of Science ®Google Scholar
• Ramakrishnaiah, N. and Kurien, P. P. (1983). Variability in the dehulling characteristics of pigeon pea (Cajanus cajan) cultivars. J. Food Sci. Technol. 20:287–291.
   Web of Science ®Google Scholar
• Ramakrishnaiah, N. and Kurien, P. P. (1985). Non-starchy polysaccharides of pigeon pea and their influence on dehulling characteristics. J. Food Sci. Technol. 22:429–430.
   Web of Science ®Google Scholar
• Ramakrishnaiah, N. Pratape, V. M. and Narasimha, H. V. (1993). National Survey of Pulse Milling Industry in India including Rural Processing: A Status Report. Central Food Technological Research Institute, Mysore, India.
   Google Scholar
• Ramakrishnaiah, N. and Kurien, P. P. (1995). Non starchy polysaccharides content of desi and kabuli varieties of chickpea. In: Annual Report 1995. Central Food Technological Research Institute, Mysore, India.
   Google Scholar
• Ramasamy, R. and Harte, J. B. (2009). Milling and physicochemical properties of chickpea (Cicer arietinum L.) varieties. J. Sci. Food Agric. 89:258–266.
   Web of Science ®Google Scholar
• Reichert, R. D. Oomah, B. D. and Young, C. G. (1984). Factors affecting the efficiency of abrasive-type dehulling of grain legumes investigated with a new intermediate-sized, batch dehuller. J. Food Sci. 49:267–272.
   Web of Science ®Google Scholar
• Rodiño, A. P. Kumar, J. De La Fuente, M. De Ron, A. M. and Santalla, M. (2011). Postharvest technology. In: Biology and Breeding of Food Legumes, pp. 385–394. Pratap, A. and Kumar, J., Eds., CAB International, Wallingford, UK.
   Google Scholar
• Ross, K. A. Alejo-Lucas, D. Malcolmson, L. J. Arntfield, S. D. and Cenkowski, S. (2010). Effect of milling treatments and storage conditions on the dehulling characteristics of red Lentils. Int. J. Postharvest Technol. Inn. 2(1):89–113.
   Google Scholar
• Round, A. N. Rigby, N. M. MacDougall, A. J. and Morris, V. J. (2010). A new view of pectin structure revealed by acid hydrolysis and atomic force microscopy. Carbohydrate Res. 345:487–497.
   PubMed Web of Science ®Google Scholar
• Sahay, K. M. (2003). Postharvest technology and value addition in chickpea. In: Chickpea Research in India, pp. 315–325. Ali, M. Kumar, S. and Singh, N. B., Eds. Indian Institute of Pulse Research, Kanpur, India.
   Google Scholar
• Sangani, V. P. Patel, N. C. Bhatt, V. M. Davara, P. R. and Antala, D. K. (2014). Optimization of enzymatic hydrolysis of pigeon pea for cooking quality of dhal. Int. J. Agric. Bio. Eng. 7(5):123–131.
   Web of Science ®Google Scholar
• Saxena, R. P. (1985). Milling of pigeon pea grain and associated aspects. Ph.D. Thesis (Unpublished), G. B. Pant University of Agriculture and Technology, Pantnagar, India.
   Google Scholar
• Scheule. (2016). Schule-Technical Literature on Verti Sheller and Splitter for Pulses. FH Schule Muhlenbau GmbH, Dieselstrasse 5, D-21465, Reinbek, Hamburg, Germany.
   Google Scholar
• Shahin, M. A. Symons, S. J. and Wang, N. (2012). Predicting dehulling efficiency of lentils based on seed size and shape characteristics measured with image analysis. Qual. Assur. Saf. Crops Food. 4:9–16.
   Web of Science ®Google Scholar
• Shiga, T. M. and Lajolo, F. M. (2006). Cell wall polysaccharides of common beans (Phaseolus vulgaris L.): composition and structure. Carbohydrate Polym. 63:1–12.
   Web of Science ®Google Scholar
• Singh, A. and Ilyas, S. M. (1987). Energy audit of pulse milling technologies in India. Paper presented in National Energy Conference on Energy in Production Agriculture and Food Processing, Punjab Agricultural University, Ludhiana, India, October 30-31, 1987.
   Google Scholar
• Singh, U. (1993). Protein quality of pigeon pea (Cajanus cajan L.) as influenced by seed polyphenols and cooking process. Plant Food Human Nutr. 43:171–179.
   PubMed Web of Science ®Google Scholar
• Singh, U. (1995). Methods for dehulling of pulses: A critical appraisal. J. Food Sci. Technol. 32(2):81–93.
   Web of Science ®Google Scholar
• Singh, U. and Jambunathan, R. (1990). Pigeon pea: Post-harvest technology. In: The Pigeon Pea, pp. 435–455. CAB International, Wallingford, UK.
   Google Scholar
• Singh, U. Santosa, B. A. S. and Rao, P. V. (1992). Effect of dehulling methods and physical characteristics of grain on dhal yield of pigeon pea (Cajanus cajan L.) genotypes. J. Food Sci. Technol. 29:350–353.
   Web of Science ®Google Scholar
• Sokhansanj, S. and Patil, R. T. (2003). Dehulling and splitting pulses. In: Handbook of Post Harvest Technology, pp. 397–426. Chakraverty, A. Mujumdar, A. S. Raghavan, G. S. V. and Ramaswamy, H. S., Eds., Marcel Dekker, Inc., New York, USA.
   Google Scholar
• Sosulski, K. Sosulski, F. W. and Coxworth, E. (1988). Carbohydrates hydrolysis of canola to enhance extraction with hexane. J. Am. Oil Chem. Soc. 65:357–361.
   Web of Science ®Google Scholar
• Sreerama, Y. N. Sasikala, V. B. and Pratape, V. M. (2008). Expansion properties and ultrastructure of legumes: effect of chemical and enzyme pre-treatments. LWT Food Sci. Technol. 42:44–49.
   Web of Science ®Google Scholar
• Sreerama, Y. N. Sashikala, V. B. and Pratape, V. M. (2009). Effect of enzyme pre-dehulling treatments on dehulling and cooking properties of legumes. J. Food Eng. 92:389–395.
   Web of Science ®Google Scholar
• Srivastava, V. Mishra, D. P. Chand, C. Gupta, R. K. and Singh, B. P. N. (1988). Influence of soaking on various biochemical changes and dehusking efficiency in pigeon pea (Cajanus cajan L.) seeds. J. Food Sci. Technol. 25:267–271.
   Web of Science ®Google Scholar
• Swamy, R. N. Ramakrishnaiah, N. Kurien, P. P. and Salimath, P. V. (1991). Studies on carbohydrates of red gram in relation to milling. J. Sci. Food Agric. 57:379–390.
   Web of Science ®Google Scholar
• Tiwari, B. K. Jaganmohan, R. and Vasan, B. S. (2007). Effect of heat processing on milling of black gram and its end product quality. J. Food Eng. 78:356–360.
   Web of Science ®Google Scholar
• Tiwari, B. K. Mohan, R. J. and Vasan, B. S. (2008). Effect of different premilling treatments on dehulling of black gram (Phaseolus mungo L.). J. Food Process. Preserv. 32(4):610–620.
   Web of Science ®Google Scholar
• Tiwari, B. K. Jaganmohan, R. Venkatachalapathy, N. Anand, M. T. Surabi, A. and Alagusundaram, K. (2010). Optimisation of hydrothermal treatment for dehulling pigeon pea. Food Res. Int. 43:496–500.
   Web of Science ®Google Scholar
• Tiwari, B. K. and Singh, N. (2012). Pulse Chemistry and Technology. The Royal Society of Chemistry, Cambridge, UK.
   Google Scholar
• Tosh, S. M. and Yada, S. (2010). Dietary fibres in pulse seeds and fractions: Characterization, functional attributes and applications. Food Res. Int. 43:450–460.
   Web of Science ®Google Scholar
• Unal, H. Isık, E. Izli, N. and Tekin, Y. (2008). Geometric and mechanical properties of mung bean (Vigna radiata l.) grain: effect of moisture. Int. J. Food Prop. 11:585–599.
   Web of Science ®Google Scholar
• USDA. (2016). USDA Nutrient Data Laboratory. Available from http://www.nal.usda.gov/fnic/foodcomp/search/. Accessed July 29, 2016.
   Google Scholar
• Vandenberg, A. (2009). Postharvest processing and value addition. In: The Lentil: Botany, Production and Uses, pp. 391–407. Erskine, W. Muehlbauer, F. J. Sarkar, A. and Sharma, B., Eds., CAB International, Wallingford, UK.
   Google Scholar
• Verma, P. Saxena, R. P. Sarkar, B. C. and Omre, P. K. (1993). Enzymatic pre-treatment of pigeon pea (Cajanus cajan) grain and its interaction with milling. J. Food Sci. Technol. 30:368–370.
   Web of Science ®Google Scholar
• Vishwakarma, R. K. Nanda, S. K. Shivhare, U. S. and Patil, R. T. (2009). Status on post harvest technology of guar (Cyamopsis tetragonoloba) in India. Agric. Mech. Asia Afr. Latin Am. 40:65–72.
   Google Scholar
• Vishwakarma, R. K. Shivhare, U. S. and Nanda, S. K. (2012). Predicting guar seed splitting by compression between two plates using Hertz theory of contact stresses. J. Food Sci. 77(9):E231–E239. DOI: https://doi.org/10.1111/j.1750-3841.2012.02861.x
   PubMed Web of Science ®Google Scholar
• Vishwakarma, R. K. Shivhare, U. S. and Nanda, S. K. (2016). Novel method and machine for dehulling of guar seeds and optimisation of dehulling process. Food Bioprod. Process. 99:51–57.
   Web of Science ®Google Scholar
• Wang, N. (2005). Optimization of a laboratory dehulling process for lentils (Lens culinaris). Cereal Chem. 82(6):671–676.
   Web of Science ®Google Scholar
• Wang, N. (2008). Effect of variety and crude protein content on dehulling quality and on the resulting chemical composition of red lentil (Lens culinaris). J. Sci. Food Agric. 88:885–890.
   Web of Science ®Google Scholar
• Wani, I. A. Sogi, D. S. Wani, A. A. and Gill, B. (2015). Physical and cooking characteristics of some Indian kidney bean (Phaseolus vulgaris L.) cultivars. J. Saudi Soc. Agric. Sci. DOI: https://doi.Org/10.1016/j.jssas.2014.12.002.
   Google Scholar
• Wood, J. A. and Grusak, M. A. (2007). Nutritional value of chickpea. In: Chickpea Breeding and Management, pp. 101–142. Yadav, S. S. Redden, B. Chen, W. and Sharma, B., Eds., CAB International, Wallingford, UK.
   Google Scholar
• Wood, J. A. Knights, E. J. and Harden, S. (2008). Milling performance in desi-type chickpea (Cicer arietinum L.): effects of genotype, environment and seed size. J. Sci. Food Agric. 88:108–115.
   Web of Science ®Google Scholar
• Wood, J. A. Knights, E. J. Campbell, G. M. and Choct, M. (2012). Milling performance and other quality traits affected by seed shape in isogenic lines of desi chickpea (Cicer arietinum L.). J. Agric. Sci. 4(10):244–252.
   Google Scholar
• Wood, J. A. Knights, E. J. Campbell, G. M. and Choct, M. (2014a). Differences between easy-and difficult-to-mill chickpea (Cicer arietinum L.) genotypes Part I: broad chemical composition. J. Sci. Food Agric. 94:1437–1445.
   PubMed Web of Science ®Google Scholar
• Wood, J. A. Knights, E. J. Campbell, G. M. and Choct, M. (2014b). Differences between easy- and difficult-to-mill chickpea (Cicer arietinum L.) genotypes. Part II: protein, lipid and mineral composition. J. Sci. Food Agric. 94:1446–1453.
   PubMed Web of Science ®Google Scholar
• Wood, J. A. Knights, E. J. Campbell, G. M. and Choct, M. (2014c). Differences between easy- and difficult-to-mill chickpea (Cicer arietinum L.) genotypes. Part III: free sugar and non-starch polysaccharide composition. J. Sci. Food Agric. 94:1454–1462.
   PubMed Web of Science ®Google Scholar
• Wood, J. A. and Malcolmson, L. J. (2011). Pulse milling technologies. In: Pulse Foods: Processing, Quality and Nutraceutical Applications, pp. 193–221. Tiwari, B. Gowen, A. and McKenna, B., Eds., Academic Press, UK.
   Google Scholar
• Yalçın, I. (2007). Physical properties of cowpea (Vigna sinensis L.) seed. J. Food Eng. 79:57–62.
   Web of Science ®Google Scholar
• Yalçın, I. Özarslan, C. and Akbaş, T. (2007). Physical properties of pea (Pisum sativum) seed. J. Food Eng. 79:731–735.
   Web of Science ®Google Scholar