References
- Handbook of Deposition Technologies for Films and Coatings: Science, Applications and Technology: Martin, Peter M., Ed.; William Andrew: New York, 2009.
- Baig, N.; Kammakakam, I.; Falath, W. Nanomaterials: A Review of Synthesis Methods, Properties. Recent Progress, and Challenges. Mater. Adv 2021, 2, 1821–1871.
- Szczyglewska, P.; Feliczak-Guzik, A.; Nowak, I. Nanotechnology–General Aspects: A Chemical Reduction Approach to the Synthesis of Nanoparticles. Molecules 2023, 28 (13), 4932.
- Nano-Architectured and Nanostructured Materials: Fabrication, Control and Properties: Champion, Yannick, Ed.; Hans-Jörg Fecht, Wiley-VCH: Weinheim, 2005.
- Nastasi, M.; Mayer, J.W.; Wang, Y. Ion Beam Analysis: Fundamentals and Applications; CRC Press: Boca Raton, 2014.
- Laser Beams: Theory, Properties and Applications (Lasers and Electro-Optics Research and Technology), Thys, Maxim, Desmet, Eugene, Eds.; Nova Science Pub Inc; UK ed. Edition: New York, (2010).
- Vacík, J.; Horák, P.; Bakardjieva, S.; Bejsovec, V.; Ceccio, G.; Cannavo, A.; Torrisi, A.; Lavrentiev, V.; Klie, R. Ion Sputtering for Preparation of Thin MAX and MXene Phases. Radiat. Eff. Defects Solids 2020, 175 (1-2), 177–189.
- Picciotto, A.; Torrisi, L.; Margarone, D.; Bellutti, P. Radiation Effects. Defects in Solids: Inc. Plasma Sci. & Plasma Tech 2010, 165 (6-10), 706–712.
- Zinkle, S.J.; Snead, L.L. Opportunities and Limitations for ion Beams in Radiation Effects Studies: Bridging Critical Gaps Between Charged Particle and Neutron Irradiations. Scr. Mater. 2018, 143, 154–160.
- Ziegler, J.F. Ion Implantation Science and Technology; Academic Press: NY, 2012.
- Sputtering by Particle Bombardment I: Physical Sputtering of Single-Element Solids, Behrisch, R., Ed.: Springer-Verlag Ed.: Berlin, (2013).
- Sputtering by Particle Bombardment II: Sputtering of Alloys and Compounds, Electron and Neutron Sputtering, Surface Topography, Behrisch, R., Ed.; Springer-Verlag: Berlin, 2013.
- Gates, B.D.; Xu, Q.; Stewart, M.; Ryan, D.; Willson, C.G.; Whitesides, G.M. New Approaches to Nanofabrication: Molding, Printing, and Other Techniques. Chem. Rev 2005, 105, 1171–1196.
- Zhao, Y.P.; Wang, F.C. Surface Tension Effects of Nanostructures, In Encyclopedia of Nanotechnology: Bhushan, B., Eds.; Springer: Dordrecht, 2016.
- Aralekallu, S.; Sannegowda, L.K. Handbook of Nanomaterials for Sensing Applications, In Micro and Nano Technologies: Hussain, C.M., Kailasa, S.K., Eds.; Elsevier: Amsterdam, 2021; pp 589–629.
- Christiansen, A.B.; Caringal, G.P.; Clausen, J.S.; Grajower, M.; Taha, H.; Levy, U.; Mortensen, N.A.; Kristensen, A. Black metal thin films by deposition on dielectric antireflective moth-eye nanostructures. Sci. Rep. 2015, 5. Article number: 10563.
- Vitrey, A.; Alvarez, R.; Palmero, A.; González, M.U.; García-Martín, J.M. Fabrication of Black-Gold Coatings by Glancing Angle Deposition with Sputtering. Beilstein J. Nanotechnol 2017, 8, 434–439.
- Sarkar, J. Sputtering Materials for VLSI and Thin Film Devices 2014, In Chapter 2 - Sputtering and Thin Film Deposition; Sarkar, J., Ed.; William Andrew: New York, 2014; pp 93–170.
- Yamamura, Y.; Tawara, H. At. Data Nucl. Data Tables 1996, 62, 149–253.
- www2.iap.tuwien.ac.at/www/surface/sputteryield.
- www.ujf.cas.cz/en/research-development/large-research-infrastructures-and-centres/canam/about-the-project/.
- www.mff.cuni.cz/cs/kmf/experimentalni-vybaveni/mikroskopicke-metody.
- Mayer, M. An Expert-Assisted System for Improving the Quality of IBA Simulations by SIMNRA. J. Phys. Conf. Ser. 2022, 2326, 012007.
- Ziegler, J.F.; Biersack, J.P.; Littmark, U. The Stopping and Range of Ions in Solids; Pergamon: New York, 1985.
- Vitrey, A.; Alvarez, R.; Palmero, A.; González, M.U.; García-Martín, J.M. Fabrication of Black-Gold Coatings by Glancing Angle Deposition with Sputtering. Beilstein J. Nanotechnol 2017, 8, 434–439.
- Liu, H.; Ma, D.; Li, Y.; You, L.; Leng, Y. Evolution of the Shadow Effect with Film Thickness and Substrate Conductivity on a Hemispherical Workpiece During Magnetron Sputtering. Metals 2023, 13 (1), No. 165.