Designing the Multiphase Microstructure of Steel for Optimal TRIP Effect: A Multiobjective Genetic Algorithm Based Approach

REFERENCES

• Zackay , V.F. ; Parkar , E.R. ; Fahar , D. ; Bush , R. The enhancement of ductility in high-strength steel . Trans. American Soc. Met. 1967 , 160 , 252 – 259 .
   Google Scholar
• Jacques , P. ; Furnémont , Q. ; Mertens , A. ; Delannay , F. On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity . Philos. Mag. A 2001 , 81, 1789 – 1812 .
   Web of Science ®Google Scholar
• Bouquerel , J. ; Verbeken , K. ; De Cooman , B.C. Microstructure-based model for the static mechanical behaviour of multiphase steels . Acta Mater. 2006 , 54 , 1443 – 1456 .
   Web of Science ®Google Scholar
• Nam Han , H. ; Gil Lee , C. ; Oh , C.S. ; Lee , T.H. ; Kim , S.J. A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel . Acta Mater . 2004 , 52 , 5203 – 5214 .
   Web of Science ®Google Scholar
• Perlade , A. ; Bouaziz , O. ; Furnémont , Q. A physically based model for TRIP-aided carbon steels behaviour . Mater. Sci. Eng. A 2003 , 356 , 145 – 152 .
   Web of Science ®Google Scholar
• Tsuchida , N. ; Tomota , Y. ; Moriya , H. ; Umezawa , O. ; Nagai , K. Application of the Kocks–Mecking Model to tensile deformation of an austenitic 25Cr–19Ni steel . Acta Mater. 2000 , 49 , 3029 – 3038 .
   Web of Science ®Google Scholar
• Dey , S. ; Datta , S. ; Chattopadhyay , P.P. ; Sil , J. Modeling the properties of TRIP steel using AFIS: A distributed approach . Computational Material Science 2008 , 43 , 501 – 511 .
   Web of Science ®Google Scholar
• Kong , L.X. ; Wang , B. ; Hodgson , P.D. Prediction of stress–strain behaviors in steels using an integrated constitutive, FEM and ANN model . ISIJ Int. 2001 , 7 , 795 – 800 .
   Google Scholar
• Ho Bae , J. ; Park , S.J. ; Hwan Oh , K. ; Gil Lee , C. ; Kim , S.J. Prediction of mechanical properties of TRIP steel by FEM and micromechanics . Key Eng. Mat. 2000 , 177 , 449 – 454 .
   Google Scholar
• Mukherjee , M. ; Singh , S.B. ; Mohanty , O.N. Neural network analysis of strain induced transformation behaviour of retained austenite in TRIP-aided steels . Mater. Sci. Eng. A 2006 , 434 , 237 – 245 .
   Web of Science ®Google Scholar
• Hosseini , S.M.K. ; Zarei-Hanzaki , A. ; Yazdan Panah , M.J. ; Yue , S. ANN model for prediction of the effects of composition and process parameters on tensile strength and percent elongation of Si–Mn TRIP steels . Mater. Sci. Eng. A 2004 , 374 , 122 – 128 .
   Web of Science ®Google Scholar
• Datta , S. ; Pettersson , F. ; Ganguly , S. ; Saxén , H. ; Chakraborti , N. Identification of factors governing mechanical properties of TRIP-aided steel using genetic algorithms and neural networks . Mater. Manuf. Process. 2008 , 23 , 130 – 137 .
   Web of Science ®Google Scholar
• Vasudevan , M. ; Bhaduri , A.K. ; Raj , B. ; Prasad Rao , K. Genetic-algorithm-based computational models for optimizing the process parameters of A-TIG welding to achieve target bead geometry in type 304 L(N) and 316 L(N) stainless steels . Mater. Manuf. Process. 2007 , 22 , 641 – 649 .
   Web of Science ®Google Scholar
• Miettinen , K. Using interactive multiobjective optimization in continuous casting of steel . Mater. Manuf. Process. 2007 , 22 , 585 – 593 .
   Web of Science ®Google Scholar
• Saxén , H. ; Pettersson , F. ; Gunturu , K. Evolving nonlinear time-series models of the hot metal silicon content in the blast furnace . Mater. Manuf. Process. 2007 , 22 , 577 – 584 .
   Web of Science ®Google Scholar
• Jackiewicz , J. Optimization of the performance of porous low-carbon steels by means of an evolution strategy . Mater. Manuf. Process. 2007 , 22 , 623 – 633 .
   Web of Science ®Google Scholar
• Ganguly , S. ; Datta , S. ; Chakraborti , N. Genetic algorithms in optimization of strength and ductility of low-carbon steels . Mater. Manuf. Process. 2007 , 22 , 650 – 658 .
   Web of Science ®Google Scholar
• Datta , S. ; Pettersson , F. ; Ganguly , S. ; Saxén , H. ; Chakraborti , N. Designing high strength multi-phase steel for improved strength–ductility balance using neural networks and multi-objective genetic algorithms . ISIJ Int. 2007 , 47 , 1195 – 1203 .
   Web of Science ®Google Scholar
• Ganguly , S. ; Datta , S. ; Chakraborti , N. Genetic algorithm based search on the role of variables in the work hardening process of multiphase steels . Accepted for publication in Computational Materials Science (in press) .
   Google Scholar
• Chatterjee , S. Transformations in TRIP-assisted steels: Microstructure and properties . Ph.D. thesis, Darwin College , University of Cambridge , Cambridge , 2006 .
   Google Scholar
• Rodriguez , R. ; Gutierrez , I. Unified formulation to predict the tensile curves of steels with different microstructure . Mater. Sci. Forum 2003 , 4525 , 426 – 432 .
   Google Scholar
• Goel , N.C. ; Sangal , S. ; Tangri , K. A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retain austenite: Part I . Derivation of flow curve equations. Metall. Trans. A 1985 , 16A , 2013 – 2021 .
   Web of Science ®Google Scholar
• Sangal , S. ; Goel , N.C. ; Tangri , K. A theoretical model for the flow behavior of commercial dual-phase steels containing metastable retain austenite: Part II . Calculation of flow curve. Metall. Trans. A 1985 , 16A , 2023 – 2029 .
   Web of Science ®Google Scholar
• Umemoto , M. ; Liu , Z.G. ; Sugimoto , S. ; Tsuchiya , K. Tensile stress–strain analysis of single-structure steels . Metall. Mater. Trans. A 2000 , 31A , 1785 – 1793 .
   Web of Science ®Google Scholar
• Ishikawa , N. ; Parks , D.M. ; Socrate , S. ; Kurihara , M. Micromechanical modeling of ferrite–pearlite steels using finite element unit cell models . ISIJ Int. 2000 , 40 , 1170 – 1179 .
   Web of Science ®Google Scholar
• Tsuchida , N. ; Tomota , Y. ; Moriya , H. ; Umezawa , O. ; Nagai , K. Application of the Kocks–Mecking model to tensile deformation of an austenitic 25Cr–19Ni Steel . Acta Mater. 2000 , 49 , 3029 – 3038 .
   Web of Science ®Google Scholar
• Taleb , L. ; Sidoroft , F.A. Micromechanical modeling of the Greenwood–Johnson mechanism in transformation induced plasticity . Int. J. Plasticity 2003 , 19 , 1821 – 1842 .
   Web of Science ®Google Scholar
• Mecking , H. ; Kocks , U.F. Kinetics of flow and strain-hardening. Acta Metall. 1981, 29, 1865–1875.
   Google Scholar
• Estrin , Y; Mecking , H. A unified phenomenological description of work hardening and creep based on one-parameter models . Acta Metall. 1984 , 32 , 57 – 70 .
   Google Scholar
• Olson , G.B. ; Cohen , M. Kinetics of strain-induced martensitic nucleation . Metall. Trans. A 1975 , 6A , 791 – 795 .
   Web of Science ®Google Scholar
• Goldberg , D.E. Genetic Algorithms in Search, Optimization and Machine Learning ; Pearson-Education : New Delhi , 2002 .
   Google Scholar
• Sahay , S.S. ; Mehta , R. ; Krishnan , K. Genetic-algorithm-based optimization of an industrial age-hardening operation for packed bundles of aluminum rods . Mater. Manuf. Process. 2007 , 22 , 615 – 622 .
   Web of Science ®Google Scholar
• Colaço , M.J. ; Dulikravich , G.S. Solidification of double-diffusive flows using thermo-magneto-hydrodynamics and optimization . Mater. Manuf. Process. 2007 , 22 , 594 – 606 .
   Web of Science ®Google Scholar
• Kovacic , M. ; Uratnik , P. ; Brezocnik , M. ; Turk , R. Prediction of the bending capability of rolled metal sheet by genetic programming . Mater. Manuf. Process. 2007 , 22 , 634 – 640 .
   Web of Science ®Google Scholar
• Deb , K. Multiobjective Optimization Using Evolutionary Algorithms ; John Wiley & Sons Ltd .: Chichester , 2001 .
   Google Scholar
• Deb , K. ; Pratap , A. ; Agarwal , S. ; Meyarivan , T. A fast and elitist multiobjective genetic algorithm: NSGA-II . IEEE Trans. Evol. Comput. 2002 , 6 , 182 – 197 .
   Web of Science ®Google Scholar
• Coello Coello , C.A. ; Van Veldhuizen , D.A. ; Lamont , G.B. Evolutionary Algorithms for Solving Multi-Objective Problems ; Kluwer Academic Publishers : New York , 2002 .
   Google Scholar
• Gladman , T. ; Melvor , I.D. ; Pickering , F.B. Some aspects of the structure-property. Relationships in high-carbon ferrite–pearlite steels . J. Iron Steel Inst. 1972 , 210 , 916 – 922 .
   Web of Science ®Google Scholar
• Samek , L. ; De Moor , E. ; Penning , J. ; De Cooman , B.C. Influence of alloying elements on the kinetics of strain induced martensitic nucleation in low alloy, multiphase high strength steels . Metall. Trans. A 2006 , 37A , 109 – 124 .
   Web of Science ®Google Scholar
• Petch , N.J. The cleavage strength of polycrystals . J. Iron Steel Inst. 1953 , 174 , 25 – 28 .
   Web of Science ®Google Scholar