REFERENCES
- Threadgill , P. Terminology in friction stir welding . Science and Technology of Welding and Joining 2007 , 12 , 357 – 360 .
- Sinclair , P. ; Longhurst , R. ; Cox , C. ; Strauss , A. ; Cook , G. Heated friction stir welding: An experimental and theoretical investigation into how preheating influences on process forces. DOS Sept. 2009, Materials and Manufacturing Processes.
- Colegrove , P. ; Shercliff , H. 3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile . J. Materials Processing Technol. 2005 , 169 , 320 – 327 .
- Artharifar , H. ; Lin , D. ; Kovacevic , R. Numerical and experimental investigations on the loads carried by the tool during friction stir welding . J. Materials Eng. and Perf. 2008 .
- Lombard , H. ; Hattingh , D.G. ; Steuwer , A. ; James , M.N. Optimizing FSW process parameters to minimize defects and maximize fatigue life in 5083-H321 aluminum alloy . Engineering Fracture Mechanics 2008 , 75 , 341 – 354 .
- Lakshminarayanan , A.K. ; Balasubramanian , V. Process parameters optimization for friction stir welding of RDE-40 aluminum alloy using Taguchi technique . Trans. Nonferrous Met. Soc. China 2008 , 18 , 548 – 554 .
- Meng , Zhaoxin. ; Chen , Hui. ; Yue , Xihua. International Federation for Information Processing (IFIP) . In Knowledge Enterprise: Intelligent Strategies In Product Design, Manufacturing, and Management ; et al. , Eds.; Springer : Boston , 2006 ; Vol. 207 , 483 – 491 .
- Fratini , L. ; Carona , V. Friction stir welding lap joint resistance optimization through gradient techniques . J. Manuf. Sci. Eng. 2007 , 129 , 985 – 991 .
- Crawford , R. ; Cook , G.E. ; Strauss , A.M. ; Hartman , D.A. Modelling of friction stir welding for robotic implementation . Int. J. Modelling, Identification and Control 2006 , 1 ( 2 ), 101 – 106 .
- Eldred, Michael S. ; Brian M. Adams.; David M. Gay.; Laura P. Swller . DAKOTA, A Multilevel Parallel Object-Oriented Framework for Design Optimization, Parameter Estimation, Uncertainty Quantification, and Sensitivity Analysis . Sandia National Laboratories : Livermore , CA , 2008 .
- Lammlein , D. ; DeLapp , D.R. ; Flemming , P.A. ; Strauss , A.M. ; Cook , G.E. The application of shoulderless conical tools in friction stir welding: An experimental and theoretical study . Mat. and Design 2009 , 30 , 4012 – 4022 .
- Sheppard , T. ; Wright , D. Determination of flow stress: Part 1 constitutive equation for aluminum alloys at elevated temperatures . Met. Technol. 1979 , 6 , 215 – 223 .
- Sellars , C.M. ; Tegart , W.J.M. Hot workability . Int. Metall. Rev. 1972 , 17 , 1 – 24 .
- Liechty , B.C. ; Webb , B.W. Modeling the frictional boundary conditions in friction stir welding. Int J Mach Tools Manufact 2008. doi:10.1016/j.ijmachtools.2008.04.005.