Microcellular Foaming of PVC/NBR Thermoplastic Elastomer

REFERENCES

• Johlitz , M. ; Diebels , S. Effective mechanical behavior of filled polymers . Mech. Adv. Mater. Strut. 2011 , 18 ( 2 ), 106 – 114 .
   Web of Science ®Google Scholar
• Pavličević , J. ; Budinski-Simendić , J. ; Radičević , R. ; Katsikas , L. ; Popović , I. ; Mészáros Szécsényi , K. ; Špirkova , M. Preparation and thermal stability of elastomers based on irregular poly(urethane-isocyanurate) networks . Materials and Manufacturing Processes 2009 , 24 , 1217 – 1223 .
   Web of Science ®Google Scholar
• Perera , M.C.S. Characterisation of PVC/NBR and PVC/ENR50 binary blends and PVC/ENR50/NBR ternary blends by DMA and solid state NMR . Polym. J. 2001 , 37 ( 1 ), 167 – 178 .
   Web of Science ®Google Scholar
• Moloodi , A. ; Raiszadeh , R. Fabricating Al foam from turning scraps . Materials and Manufacturing Processes 2011 , 26 ( 7 ), 890 – 896 .
   Web of Science ®Google Scholar
• Sarajan , Z. ; Sedigh , M. Influences of titanium hydride (TiH2) content and holding temperature in foamed pure aluminum . Materials and Manufacturing Processes 2009 , 24 ( 5 ), 590 – 593 .
   Web of Science ®Google Scholar
• Martini , J.E. The production and analysis of microcellular foam. Ph.D. dissertation, Massachusetts Institute of Technology, 1981.
   Google Scholar
• Faruk , O. ; Bledzki , A.K. ; Matuana , L.M. Microcellular foamed wood-plastic composites by different processes: A review . Macromol. Mater. Eng. 2007 , 292 , 113 – 127 .
   Web of Science ®Google Scholar
• Selvakumar , P. ; Bhatnagar , N. Studies on polypropylene/carbon fiber composite foams by nozzle-based microcellular injection molding system . Materials and Manufacturing Processes 2009 , 24 ( 5 ), 533 – 540 .
   Web of Science ®Google Scholar
• VanHouten , D.J. ; Baird , D.G. Generation of low-density high-performance poly(arylene ether sulfone) foams using a benign processing technique . Polym. Eng. Sci. 2009 , 49 ( 1 ), 44 – 51 .
   Web of Science ®Google Scholar
• Collias , D.I. ; Baird , D.G. Impact behavior of microcellular foams of polystyrene and styrene-acrylonitrile copolymer, and single-edge-notched tensile toughness of microcellular foams of polystyrene, styrene-acrylonitrile copolymer, and polycarbonate . Polym. Eng. Sci. 1995 , 35 , 1178 – 1183 .
   Web of Science ®Google Scholar
• Wang , J. ; Lee , P.C. ; Park , C.B. Visualization of initial expansion behavior of butane-blown low-density polyethylene foam at extrusion die exit. Polym. Eng. Sci. 2011, 51 (3), 492–499.
   Web of Science ®Google Scholar
• Lee , E.K. Novel manufacturing processes for polymer bead foams. Ph.D. dissertation, University of Toronto, 2010.
   Google Scholar
• Wong , A. ; Chu , K.M. ; Park , C.B. ; Siu , N.L. A batch foaming visualization system with extensional stress-inducing ability . Chem. Eng. Sci. 2011 , 66 ( 1 ), 55 – 63 .
   Web of Science ®Google Scholar
• Kaewmesri , W. ; Rachtanapun , P. ; Pumchusak , J. Effect of solvent plasticization on polypropylene microcellular foaming process and foam characteristics . J. Appl. Polym. Sci. 2008 , 107 , 63 – 70 .
   Web of Science ®Google Scholar
• Lee , H. ; Fasulo , P.D. ; Rodgers , W.R. ; Paul , D.R. Thermoplastic olefin based nanocomposites-Part1: Morphology and mechanical properties . Polym. 2005 , 46 , 11673 – 11689 .
   Web of Science ®Google Scholar
• Tsivintzelis , I. ; Angelopoulou , A.G. ; Panayiotou , C. Foaming of polymers with supercritical CO2: An experimental and theoretical study . Polym. 2007 , 48 , 5928 – 5939 .
   Web of Science ®Google Scholar
• Wong , S. ; Naguib , H. ; Park , C.B. Effect of processing parameters on the cellular morphology and mechanical properties of thermoplastic polyolefin (TPO) microcellular foams . Adv. Polym. Tech. 2008 , 26 ( 4 ), 232 – 246 .
   Web of Science ®Google Scholar