Semisolid Processing of A380 Al Alloy Using Cooling Slope

REFERENCES

• Ning , Z.L. ; Wang , H. ; Sun , J.F. Deformation behavior of semisolid A356 alloy prepared by low temperature pouring . Materials and Manufacturing Processes 2010 , 25 ( 7 ), 648 – 653 .
   Web of Science ®Google Scholar
• Fan , Z. Semisolid metal processing . International Materials Reviews 2002 , 47 , 49 – 85 .
   Web of Science ®Google Scholar
• Salleh , M.S. ; Omar , M.Z. ; Syarif , J. ; Mohammed , M.N. An overview of semisolid processing of aluminium alloys . ISRN Material Science 2013 , 227 , 1 – 9 .
   Google Scholar
• Mao , W. ; Zheng , Q. ; Zhu , D. Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry . The Transactions of Nonferrous Metals Society of China 2010 , 20 , 1769 – 1773 .
   Web of Science ®Google Scholar
• Guan , R.G. ; Zhao , Z.Y. ; Dai , C.G. ; Lee , C.S. ; Liu , C.M. A novel semisolid rheo-rolling process of AZ31 alloy with vibrating sloping plate . Materials and Manufacturing Processes 2013 , 28 ( 3 ), 299 – 305 .
   Web of Science ®Google Scholar
• Das , P. ; Samanta , S.K. ; Chattopadhyay , H. ; Sharma , B.B. ; Dutta , P. Eulerian two-phase flow simulation and experimental validation of semisolid slurry generation process using cooling slope . Material Science and Technology 2013 , 29 ( 1 ), 83 – 92 .
   Web of Science ®Google Scholar
• Das , P. ; Samanta , S.K. ; Chattopadhyay , H. ; Dutta , P. Effect of pouring temperature on cooling channel semi solid slurry generation process . Acta Metallurgica Sinica (English Letters) 2012 , 25 ( 5 ), 329 – 339 .
   Google Scholar
• Das , P.; Samanta S.K. ; Chattopadhyay , H. ; Dutta , P. Studies on rheocasting using cooling slope . Solid State Phenomena 2013 , 192–193 , 341 .
   Google Scholar
• Farahany , S. ; Ourdjini , A. Effect of cooling rate and silicon refiner/modifier on solidification pathways of Al-11.3Si-2Cu-0.4Fe alloy . Materials and Manufacturing Processes 2013 , 28 ( 6 ), 657 – 663 .
   Web of Science ®Google Scholar
• Gowri , S. ; Samuel , F.H. Microstructure of Al-Si-Cu-Mg-Fe 380 alloy . Metallurgical and Materials Transactions A 1994 , 25A , 437 – 440 .
   Web of Science ®Google Scholar
• Avner , S.H. Introduction to Physical Metallurgy, , 2nd ed. ; Tata McGraw-Hill Education : India , 2012 , 481 – 490 .
   Google Scholar
• Seifeddine , S. ; Svensson , I.L. The influence of Fe and Mn content and cooling rate on the microstructure and mechanical properties of A380-die casting alloys . Metallurgical Science and Technology 2009 , 27-1 , 11 – 20 .
   Google Scholar
• Rodrguez , S.H. ; Reyes , R.E.G. ; Dwivedi , D.K. ; Gonzlez , O.A. ; Hernndez , V.H.B. The effect of Al-5Ti-1B on microstructure and mechanical properties of Al-12Si-xFe alloy . Materials and Manufacturing Processes 2012 , 27 ( 6 ), 599 – 604 .
   Web of Science ®Google Scholar
• Suwanpinji , P. ; Kitkamthorn , U. ; Diewwanit , I. ; Umeda , T. Influence of copper and iron on solidification characteristics of 356 and 380-type aluminium alloy . Material Transactions 2003 , 44 , 845 – 852 .
   Web of Science ®Google Scholar
• Gencalp , S. ; Saklakoglu , N. Semisolid microstructure evolution during cooling slope casting under vibration of A380 aluminium alloy . Materials and Manufacturing Processes 2010 , 25 , 943 – 947 .
   Web of Science ®Google Scholar
• Abtan , N.S. ; Ghlaim , K.H. Comparision of applied pressure effect on improving density, hardness, and microstructure by both squeeze casting process and pressure die casting process for 380-Al alloy. The Iraqi Journal For Mechanical and Material Engineering 2012, 12 (2), 334–343.
   Google Scholar
• Guo , H. ; Yang , X. ; Hu , B. ; Zhu , G. Rheo-diecasting process for semi-solid aluminium alloys . Journal of Wuhan University of Technology-Materials Science Edition 2007 , 22 , 590 – 595 .
   Web of Science ®Google Scholar
• Das , P. ; Samanta , S.K. ; Ray , T. ; Venkatpathi , B.R.K. Mechanical properties and tensile fracture mechanism of Rheocast A356 Al alloy using cooling slope . Advanced Materials Research 2012 , 585 , 354 – 358 .
   Google Scholar
• Kashyap , K.T. ; Chandrasekhar , T. Effects and mechanisms of grain refinement in aluminium alloys . Bulletin of Material Science 2001 , 24 , 345 – 353 .
   Web of Science ®Google Scholar
• Das , P. ; Samanta , S.K. ; Venkatpathi , B.R.K. ; Chattopadhyay , H. ; Dutta , P. Microstructure evolution of A356 Al alloy during flow along a cooling slope . Transactions of The Indian Institute of Metals 2012 , 65 ( 6 ), 669 – 672 .
   Web of Science ®Google Scholar
• Zhao , Z. ; Wang , J. ; Liu , L. Grain refinement by pulse electric discharging and undercooling mechanism . Materials and Manufacturing Processes 2011 , 26 ( 2 ), 249 – 254 .
   Web of Science ®Google Scholar
• Zhao , Z. ; Liu , Y. ; Liu , L. Grain refinement induced by a pulsed magnetic field and synchronous solidification . Materials and Manufacturing Processes 2011 , 26 ( 9 ), 1202 – 1206 .
   Web of Science ®Google Scholar
• Canyook , R. ; Petsut , S. ; Wisutmethangoon , S. ; Flemings , M.C. ; Wannasin , J. Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy . The Transactions of Nonferrous Metals Society of China 2010 , 20 , 1649 .
   Web of Science ®Google Scholar
• Guo , H.M. ; Luo , X.Q. ; Zhang , A.S. ; Yang , X.J. Isothermal coarsening of primary particles during rheocasting . The Transactions of Nonferrous Metals Society of China 2010 , 20 , 1361 – 1366 .
   Web of Science ®Google Scholar
• Liu , Z. ; Mao , W.M. ; Zhao , Z.D. Effect of grain refining on primary α phase in semi-solid A356 alloy prepared by low superheat pouring and slight electromagnetic stirring . Acta Metallurgica Sinica (English Letters) 2008 , 21 , 57 – 64 .
   Google Scholar
• Das , P. ; Dutta , S. ; Samanta , S.K. Evaluation of primary phase morphology of cooling slope cast Al-Si-Mg alloy samples using image. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2013, 227 (10), 1474–1483.
   Google Scholar
• Burapa , R. ; Janudom , S. ; Chucheep , T. ; Canyook , R. ; Wannasin , J. Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process . The Transactions of Nonferrous Metals Society of China 2010 , 20 , s857 – s861 .
   Web of Science ®Google Scholar
• Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/lmmp.
   Google Scholar