Modulation-Assisted Drilling of Glass-Fiber-Reinforced Plastics

REFERENCES

• Soutis , C. Fibre reinforced composite in aircraft construction . Progress in Aerospace Science 2005 , 41 , 143 – 151 .
   Web of Science ®Google Scholar
• Arul , S. ; Vijayaraghavan , L. ; Malhotra , S.K. ; Krishnamurthy , R. The effect of vibratory drilling on hole quality in polymeric composites . International Journal of Machine Tools & Manufacture 2006 , 46 , 252 – 259 .
   Web of Science ®Google Scholar
• Kishore , R.A. ; Tiwari , R. ; Rakesh , P.K. ; Singh , I. ; Bhatnagar , N. Investigation of drilling in fibre-reinforced plastics using response surface methodology . Proceeding of IMechE Part B: J. Engineering Manufacture 2010 , 225 , 453 – 457 .
   Web of Science ®Google Scholar
• Bhatnagar , N. ; Singh , I. ; Nayak , D. Damage investigation in drilling glass fiber reinforced plastic composites . Materials and Manufacturing Processes 2004 , 19 ( 6 ), 995 – 1007 .
   Web of Science ®Google Scholar
• Bhatnagar , N. ; Nayak , D. ; Singh , I. ; Chouhan , H. ; Mahajan , P. Determination of machining induced damage characteristics of fibre reinforced plastic composites laminates . Materials and Manufacturing Processes 2004 , 19 ( 6 ), 1009 – 1023 .
   Web of Science ®Google Scholar
• Palanikumar , K. ; Prakash , S. ; Shanmugam , K. Evaluation of delamination in drilling GFRP composites . Materials and Manufacturing Processes 2008 , 23 ( 8 ), 858 – 864 .
   Web of Science ®Google Scholar
• Kumar , S. ; Chauhan , S.R. ; Rakesh , P.K. ; Singh , I. ; Davim , J.P. Drilling of glass fiber/vinyl ester composites with fillers . Materials and Manufacturing Processes 2012 , 27 ( 3 ), 314 – 319 .
   Web of Science ®Google Scholar
• Singh , I. ; Bhatnagar , N. Drilling induced damage in uni-directional glass fibre reinforced plastic (UD-GFRP) composite laminates . International Journal of Advanced Manufacturing Technology 2006 , 27 , 877 – 882 .
   Web of Science ®Google Scholar
• Ramkumar , J. ; Malhotra , S.K. ; Krishnamurthy , R. Effect of workpiece vibration on drilling of GFRP laminates . Journal of Material Processing Technology 2004 , 152 , 329 – 332 .
   Web of Science ®Google Scholar
• Wang , X. ; Wang , L.J. ; Tao , J.P. Investigation on thrust in vibration drilling of fiber-reinforced plastics . Journal of Materials Processing Technology 2004 , 148 , 239 – 244 .
   Web of Science ®Google Scholar
• Liu , D. ; Tang , Y. ; Cong , W.L. A review of mechanical drilling for composite laminates . Composite Structures 2012 , 94 , 1265 – 1279 .
   Web of Science ®Google Scholar
• Kilickap , E. Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite . Expert System with Applications 2010 , 37 , 6116 – 6122 .
   Web of Science ®Google Scholar
• Davim , J.P. ; Reis , P. ; Antonio , C.C. Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up . Composite Science and Technology 2004 , 64 , 289 – 297 .
   Web of Science ®Google Scholar
• Sardinas , R.Q. ; Reis , P. ; Davim , J.P. Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms . Composite Science and Technology 2006 , 66 , 3083 – 3088 .
   Web of Science ®Google Scholar
• Khashaba , U.A. ; EI-Sobaty , I.A. ; Selmy , A.I. ; Megahed , A.A. Machinability analysis in drilling woven GFR/epoxy composites: part I – effect of machining parameters . Composites: Part A 2010 , 41 , 391 – 400 .
   Web of Science ®Google Scholar
• Gaitonde , V.N. ; Karnik , S.R. ; Rubio , J.C. ; Correia , A.E. ; Abrao , A.M. ; Davim , J.P. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites. Journal of Material Processing Technology 2008, 203, 431–438.
   Web of Science ®Google Scholar
• Karnik , S.R. ; Gaitonde , V.N. ; Rubio , J.C. ; Correia , A.E. ; Abrao , A.M. ; Davim , J.P. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model . Material and Design 2008 , 29 , 1768 – 1776 .
   Web of Science ®Google Scholar
• Rubio , J.C. ; Abrao , A.M. ; Faria , P.E. ; Correia , A.E. ; Davim , J.P. Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of delamination factor . International Journal of Machine Tools and Manufacture 2008 , 48 , 715 – 720 .
   Web of Science ®Google Scholar
• Rawat , S. ; Attia , H. Characterization of the dry high speed drilling process of woven composites using machinability maps approach . CIRP Annals – Manufacturing Technology 2009 , 58 , 105 – 108 .
   Web of Science ®Google Scholar
• Toews III , H.G. ; Compton , W.D. ; Chandrasekar , S. A study of the influence of superimposed low-frequency modulation on the drilling process . Precision Engineering 1998 , 22 ( 1 ), 1 – 9 .
   Web of Science ®Google Scholar
• Chhabra , P.N. ; Ackroyd , B. ; Compton , W.D. ; Chandrasekar , S. Low-frequency modulation-assisted drilling using linear drives . Proceeding of the IMechE Part B-Journal of Engineering Manufacture 2002 , 216 ( 3 ), 321 – 330 .
   Web of Science ®Google Scholar
• Mann , J.B. ; Chandrasekar , S. ; Compton , W.D. Tool holder assembly and method for modulation-assisted machining. US Patent No. 7,587, 965 B2, 2009.
   Google Scholar
• Mann , J.B. ; Saldana , C. ; Compton , W.D. ; Farris , T.N. ; Trumble , K.P. ; Chandrasekar , S. Effect of controlled modulation on chip formation and interface tribology in machining . Manufacturing Science and Engineering 2009 , 1 , 187 – 191 .
   Google Scholar
• Joshi , R.S. ; Singh , H. Using X-ray diffraction for studying the effect of modulation and machining parameters on deformation level in brass particulate produced by modulation assisted machining . Powder Diffraction Journal 2013 , 28 , S315 – S326 .
   Web of Science ®Google Scholar
• Mann , J.B. ; Guo , Y. ; Saldana , C. ; Compton , W.D. ; Chandrasekar , S. Enhancing material removal processes using modulation-assisted machining . Tribology International 2011 , 44 ( 10 ), 1225 – 1235 .
   Web of Science ®Google Scholar
• Chen , W.C. Some experimental investigations in the drilling of carbon fiber- reinforced plastic (CFRP) composite laminates . International Journal of Machine Tools & Manufacture 1997 , 37 ( 8 ), 1097 – 1108 .
   Web of Science ®Google Scholar
• Faraz , A. ; Biermann , D. ; Weinert , K. Cutting edge rounding: an innovative tool wear criterion in drilling CFRP composite laminates . International Journal of Machine Tools and Manufacture 2009 , 49 , 1185 – 1196 .
   Web of Science ®Google Scholar
• Joshi , R.S. ; Singh , H. An investigation on flank wear mechanism of tungsten carbide drills during conventional and modulation assisted drilling . Machining Science and Technology 2014 , 18 ( 1 ), 99 – 119 .
   Web of Science ®Google Scholar
• Lee , S.J. ; Eman , K.F. ; Wu , S.M. An analysis of the drill wandering motion . Journal of Engineering for Industry 1987 , 109 , 297 – 305 .
   Google Scholar
• Furness , R.J. ; Wu , C.L. ; Ulsoy , A.G. Statistical analysis of the effects of feed, speed and wear on hole quality in drilling . Journal of Manufacturing Science and Engineering 1996 , 118 , 367 – 375 .
   Web of Science ®Google Scholar
• Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/lmmp.
   Google Scholar