An Experimental Investigation and Analysis of PTAW Process

REFERENCES

• Su, C.; Chou, C.; Wu, B.; Lih, W. Plasma transferred arc repair welding of the nickel-base superalloy IN-738LC. Journal of Materials Engineering and Performance 1997, 6 (5), 619–627.
   Web of Science ®Google Scholar
• Gorbach, V.D.; Bochkarev, V.P.; Nazaruk, V.K. Manufacture and repair of propeller shafts and rotating parts using plasma technology. Welding International 2000, 14 (1), 71–74.
   Google Scholar
• Klimpel, A.; Janicki, D.; Lisiecki, A.; Wilk, Z.; Burda, M.; St. Klimpel, A. Plasma welding repair procedure for turbine jet apparatus rings in aircraft engines. Welding International 2014, 28 (6), 495–500.
   Google Scholar
• Zhang, H.; Xu, J.; Wang, G. Fundamental study on plasma deposition manufacturing. Surface and Coatings Technology 2002, 171 (1–3), 112–118.
   Web of Science ®Google Scholar
• Klimpel, A.; Dobrzański, L.; Lisiecki, A.; Janicki, D. The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders. Journal of Materials Processing Technology 2006, 175 (1–3), 251–256.
   Web of Science ®Google Scholar
• Mendez, P.F.; Barnes, N.; Bell, K.; Borle, S.D.; Gajapathi, S.S.; Guest, S.D.; Izadi, H.; Gol, A.K.; Wood, G. Welding processes for wear resistant overlays. Journal of Manufacturing Processes 2014, 16 (1), 4–25.
   Web of Science ®Google Scholar
• Xibao, W.; Hua, L. Metal powder thermal behaviour during the plasma transferred-arc surfacing process. Surface and Coatings Technology 1998, 106 (2–3), 156–161.
   Web of Science ®Google Scholar
• Harris, P.; Smith, B.L. Factorial technique for weld quality prediction. Metal Construction 1983, 15 (11), 661–666.
   Google Scholar
• Gatto, A.; Bassoli, E.; Fornari, M. Plasma Transferred Arc deposition of powdered high performances alloys: process parameters optimisation as a function of alloy and geometrical configuration. Surface and Coatings Technology 2004, 187 (2–3), 265–271.
   Web of Science ®Google Scholar
• Reinaldo, P.; D'Oliveira, A. NiCrSiB Coatings Deposited by Plasma Transferred Arc on Different Steel Substrates. Journal of Materials Engineering and Performance 2013, 22 (2), 590–597.
   Web of Science ®Google Scholar
• Ozel, S.; Kurt, B.; Somunkiran, I.; Orhan, N. Microstructural characteristic of NiTi coating on stainless steel by plasma transferred arc process. Surface and Coatings Technology 2008, 202 (15), 3633–3637.
   Web of Science ®Google Scholar
• Fernandes, F.; Lopes, B.; Cavaleiro, A.; Ramalho, A.; Loureiro, A. Effect of arc current on microstructure and wear characteristics of a Ni-based coating deposited by PTA on gray cast iron. Surface and Coatings Technology 2011, 205 (16), 4094–4106.
   Web of Science ®Google Scholar
• Lakshminarayanan, A.; Balasubramanian, V.; Varahamoorthy, R.; Babu, S. Predicting the dilution of plasma transferred arc hardfacing of stellite on carbon steel using response surface methodology. Metals and Materials International 2008, 14 (6), 779–789.
   Web of Science ®Google Scholar
• Barroi, A.; Hermsdorf, J.; Prank, U.; Kaierle, S. A Novel Approach for High Deposition Rate Cladding with Minimal Dilution with an Arc – Laser Process Combination. Physics Procedia 2013, 41, 249–254.
   Google Scholar
• Robert Jayachandran, J.A.; Murugan, N. Investigations on the Influence of Surfacing Process Parameters Over Bead Properties During Stainless Steel Cladding. Materials and Manufacturing Processes 2012, 27 (1), 69–77.
   Web of Science ®Google Scholar
• Xibao, W.; Xiaofeng, W.; Zhongquan, S. The composite Fe-Ti-B-C Coatings by PTA powder surfacing process. Surface and Coatings Technology 2005, 192 (2–3), 257–262.
   Web of Science ®Google Scholar
• Sudha, C.; Shankar, P.; Rao, R.S.; Thirumurugesan, R.; Vijayalakshmi, M.; Raj, B. Microchemical and microstructural studies in a PTA weld overlay of Ni-Cr-Si-B alloy on AISI 304L stainless steel. Surface and Coatings Technology 2008, 202 (10), 2103–2112.
   Web of Science ®Google Scholar
• Kumar, H.; Albert, S.; Sudha, C.; Vijayashree, R.; Bhaduri, A.; Balasubramanian, C. Hardfacing of a Modified 9Cr-1Mo Steel Component Using a Nickel-Base Alloy. Transactions of the Indian Institute of Metals 2011, 64 (4–5), 339–343.
   Web of Science ®Google Scholar
• Tigrinho, J.; d'Oliveira, A. Plasma transferred arc surface modification of a low carbon steel. Journal of Materials Science 2007, 42 (17), 7554–7557.
   Web of Science ®Google Scholar