REFERENCES
- Širok, B.; Bizjan, B.; Orbanić, A.; Bajcar, T. Mineral wool melt fiberization on a spinner wheel. Chemical Engineering Research and Design 2014, 92 (1), 80–90.
- Gnip, I.; Vaitkus, S.; Véjelis, S. An estimated prediction of the deformability of mineral wool (MW) slabs under long-term compressive stress. Construction and Building Materials 2013, 38, 675–680.
- Bajcar, T.; Blagojević, B.; Širok, B.; Dular, M. Influence of flow properties on a structure of a mineral wool primary layer. Experimental Thermal and Fluid Science 2007, 32 (2), 440–449.
- Mohan, N.; Natarajan, S.; Kumaresh Bbau, S.P.; Siddaramaiah, S.; Lee, J.H. Studies on erosive wear behavior of UHMWPE-filled aramid-epoxy hybrid composites. Materials and Manufacturing Processes 2012, 27 (4), 430–435.
- Lu, Z.L.; Lu, F.; Cao, J.W.; Li, D.C. Manufacturing properties of turbine blades of carbon fiber-reinforced SiC composite based on stereolithography. Materials and Manufacturing Processes 2014, 29 (2), 201–209.
- Zafar, A.; Schjødt-Thomsen, J.; Sodhi, R.; Goacher, R.; Kubber, D. Investigation of the ageing effects on phenol-urea-formaldehyde binder and alkanol amine-acid anhydride binder coated mineral fibers. Polymer Degradation and Stability 2013, 98 (1), 339–347.
- Toma, I.-O.; Covatariu, D.; Toma, A.-M.; Taranu, G.; Budescu, M. Strength and elastic properties of mortars with various percentages of environmentally sustainable mineral binder. Construction and Building Materials 2013, 43, 348–361.
- Medri, V.; Martelli, S.; Landi, E.; Esposito, L. Alkali inorganic binders for the production of fiber based foams. Ceramics International 2014, 40 (7), 10131–10136.
- Kaïkea, A.; Achoura, D.; Duplan, F.; Rizzuti, L. Effect of mineral admixtures and steel fiber volume contents on the behavior of high performance fiber reinforced concrete. Materials & Design 2014, 63, 493–499.
- Nozahic, V.; Amziane, S. Influence of sunflower aggregates surface treatments on physical properties and adhesion with a mineral binder. Composites Part A: Applied Science and Manufacturing 2012, 43 (11), 1837–1849.
- Rosu, M.-C.; Mihet, M.; Bratu, I. The influence of drying conditions on some physical–chemical properties of TiO2-based layers prepared using different organic binders. Materials Science in Semiconductor Processing 2014, 19, 95–100.
- Park, S.; Lee, J.-H.; Yoo, K.; Park, H.-J.; Kim, H.S.; Lee, J.C. Adhesion properties of inorganic binders for the immobilization of photocatalytic ZnO and TiO2 nanopowders. Journal of Physics and Chemistry of Solids 2008, 69 (5–6), 1461–1463.
- Wang, L.; Liu, P.; Wang, L.; Xing, W.; Fan, Y.; Xu, N. Preparation conditions and porosity of porous titanium sintered under positive pressure. Materials and Manufacturing Processes 2013, 28 (11), 1166–1170.
- Ayawanna, J.; Wattanasiriwech, D.; Wattanasiriwech, S.; Sato, K. Effect of NiO/GDC ratios and additives on electrical properties of SPFC anodes. Materials and Manufacturing Processes 2014, 29 (7), 767–770.
- Tanaka, S.; Chiu, C.-P.; Kato, Z.; Uematsu, K. Effect of internal binder on microstructure in compacts made from granules. Journal of the European Ceramic Society 2007, 27 (2–3), 873–877.
- Nampi, P.P.; Kume, S.; Hotta, Y.; Watari, K.; Itoh, M.; Toda, H.; Matsutani, A. The effect of polyvinyl alcohol as a binder and stearic acid as an internal lubricant in the formation, and subsequent sintering of spray-dried alumina. Ceramics International 2011, 37 (8), 3445–3450.
- Shin, M.-S.; Byun, Y.-J.; Choi, Y.-W.; Kang, M.-S.; Park, J.-S. On-site crosslinked quaternized poly(vinyl alcohol) as ionomer binder for solid alkaline fuel cells. International Journal of Hydrogen Energy 2014, 39 (29), 16556–16561.
- Tian, G.; Liu, L.; Meng, Q.; Cao, B. Preparation and characterization of cross-linked quaternised polyvinyl alcohol membrane/activated carbon composite electrode for membrane capacitive deionization. Desalination 2014, 354, 107–115.
- Yuan, W.-X.; Li, Z.J. Effects of PVA organic binder on electric properties of CaCu3Ti4O12 ceramics. Journal of Physics and Chemistry of Solids 2012, 73 (4), 599–603.
- Lee, S.; Kim, E.-Y.; Lee, H.; Oh, E.-S. Effects of polymeric binders on electrochemical performances of spinel lithium manganese oxide cathodes in lithium ion batteries. Journal of Power Sources 2014, 269, 418–423.