Fabrication and Machining of Metal Matrix Composites: A Review

REFERENCES

• Callister, W.D. Fundamentals of Materials Science and Engineering; Wiley: New York, 2001.
   Google Scholar
• Marsh, G. Next step for automotive materials. Materials Today 2003, 6 (4), 36–43.
   Google Scholar
• Matthews, F.L.; Rawlings, R.D. Composite Materials: Engineering and Science; Chapman & Hall, 1994.
   Google Scholar
• Surappa, M.K. Aluminium matrix composites: Challenges and opportunities. Sadhana 2003, 28 (1–2), 319–334.
   Web of Science ®Google Scholar
• Waku, Y.; Nagasawa, T. Future trends and recent developments of fabrication technology for advanced metal matrix composites. Material and Manufacturing Processes 1994, 9 (5), 937–963.
   Google Scholar
• Hehmann, F.; Froes, F.H. PM'94, Vol. III, Paris, 1994, pp. 1591–1604.
   Google Scholar
• Willis, T.C.; White, J.; Jordan, R.M.; Hughes, I.R. In Third lnt. Solidification Processing Conference, University of Sheffield, London; 1987; pp. 21–24.
   Google Scholar
• Miller, W.S.; Lenssen, L.A.; Humphreys, F.J. The strength, toughness and fracture behaviour in aluminium-lithium based metal matrix composites, In Aluminium-Lithium V, ed. by Starke, Jr. B.A.; Sanders, Jr. T.H.; MCEP Ltd.: Birmingham, 1989; 931–941.
   Google Scholar
• Sánchez, M.; Rams, J.; A. Ureña. Fabrication of aluminium composites reinforced with carbon fibres by a centrifugal infiltration process. Composites Part A: Applied Science and Manufacturing 2010, 41 (11), 1605–1611.
   Web of Science ®Google Scholar
• Sidhu, S.S.; Batish, A.; Kumar, S. Fabrication and electrical discharge machining of metal–matrix composites: A review. Journal of Reinforced Plastics and Composites 2013, 32 (17), 1310–1320.
   Web of Science ®Google Scholar
• Rosso, M. Ceramic and metal matrix composites: Routes and properties. Journal of Materials Processing Technology 2006, 175 (1), 364–375.
   Web of Science ®Google Scholar
• Jha, P.; Gupta, P.; Kumar, D.; Parkash, O. Synthesis and characterization of Fe-ZrO2 metal matrix composites. Journal of Composite Materials 2013. doi:0021998313494915.
   Google Scholar
• Konopka, K.; A. Ozie¸bło. Microstructure and the fracture toughness of the Al2O3–Fe composites. Materials characterization 2001, 46 (2), 125–129.
   Web of Science ®Google Scholar
• Pagounis, E.; Talvitie, M.; Lindroos, V.K. Influence of the metal/ceramic interface on the microstructure and mechanical properties of HIPed iron-based composites. Composites Science and Technology 1996, 56 (11), 1329–1337.
   Web of Science ®Google Scholar
• Zadra, M.; Girardini, L. High-performance, low-cost titanium metal matrix composites. Materials Science and Engineering: A 2014, 608, 155–163.
   Web of Science ®Google Scholar
• Muñoz-Moreno, R.; Boehlert, C.J.; Pérez-Prado, M.T.; Ruiz-Navas, E.M.; Llorca, J. In situ observations of the deformation behavior and fracture mechanisms of Ti-45Al-2Nb-2Mn+ 0.8 vol % TiB2. Metallurgical and Materials Transactions A 2012, 43 (4), 1198–1208.
   Web of Science ®Google Scholar
• Harrigan Jr, W.C. Commercial processing of metal matrix composites. Materials Science and Engineering: A 1998, 244 (1), 75–79.
   Web of Science ®Google Scholar
• Moustafa, S.F.; Abdel-Hamid, Z.; Abd-Elhay, A.M. Copper matrix SiC and Al2O3 particulate composites by powder metallurgy technique. Materials Letters 2002, 53 (4), 244–249.
   Web of Science ®Google Scholar
• Lai, S.-W.; Chung, D.D.L. Consumption of SiC whiskers by the Al–SiC reaction in aluminium-matrix SiC whisker composites. Journal of Materials Chemistry 1996, 6 (3), 469–477.
   Web of Science ®Google Scholar
• Schöbel, M.; Requena, G.; Fiedler, G.; Tolnai, D.; Vaucher, S.; Degischer, H.P. Void formation in metal matrix composites by solidification and shrinkage of an AlSi7 matrix between densely packed particles. Composites Part A: Applied Science and Manufacturing 2014, 66, 103–108.
   Web of Science ®Google Scholar
• Kayikci, R.; Savaş, Ö. Fabrication and properties of functionally graded Al/AlB2 composites. Journal of Composite Materials 2014. doi:0021998314541490.
   Google Scholar
• Manna, A.; Bains, H.S.; Mahapatra, P.B. Experimental study on fabrication of Al—Al2O3/Grp metal matrix composites. Journal of Composite Materials 2011, 45 (19), 2003–2010.
   Web of Science ®Google Scholar
• Harris, S.J.; AGARD Lectures Series no. 174, New Light Alloys, 1990; 4–1–4–21.
   Google Scholar
• Ramrattan, S.; Sitkins, F.; Nallakatala, M. Optimization of the casting and machining processes for a metal-matrix composite. In Proc. Canadian Soc. Mech. Eng. Symp.; McMaster University, 1996; 624–629.
   Google Scholar
• Manna, A.; Bhattacharyya, B. A study on different tooling systems during machining of Al/SiC-MMC. Journal of Materials Processing Technology 2002, 123 (3), 476–482.
   Web of Science ®Google Scholar
• Coelho, R.T.; Yamada, S.; IeRoux, T.; Aspinwall, D.K.; Wis, M.L.H. Conventional machining of an aluminium based SiC reinforced metal matrix composite (MMC) alloy. In Proceeding of the 30th MATADOR, Manchester 1993; 125–133.
   Google Scholar
• Chen, P.; Hoshi, T. High-performance machining of SiC whisker-reinforced aluminium composite by self-propelled rotary tools. CIRP Annals-Manufacturing Technology 1992, 41 (1), 59–62.
   Google Scholar
• Lin, J.T.; Bhattacharyya, D.; Lane, C. Machinability of a silicon carbide reinforced aluminium metal matrix composite. Wear 1995, 181, 883–888.
   Web of Science ®Google Scholar
• Sahin, Y.; Kok, M.; Celik, H. Tool wear and surface roughness of Al2O3 particle-reinforced aluminium alloy composites. Journal of Materials Processing Technology 2002, 128 (1), 280–291.
   Web of Science ®Google Scholar
• Manna, A.; Bhattacharayya, B. A study on machinability of Al/SiC-MMC. Journal of Materials Processing Technology 2003, 140 (1), 711–716.
   Web of Science ®Google Scholar
• Hung, N.P.; Yeo, S.H.; Lee, K.K.; Ng, K.J. Chip formation in machining particle-reinforced metal matrix composites. Material and Manufacturing Processes 1998, 13 (1), 85–100.
   Web of Science ®Google Scholar
• Lin, J.T.; Bhattacharyya, D.; Ferguson, W.G. Chip formation in the machining of SiC-particle-reinforced aluminium-matrix composites. Composites Science and Technology 1998, 58 (2), 285–291.
   Web of Science ®Google Scholar
• Davim, J.P. Diamond tool performance in machining metal–matrix composites. Journal of Materials Processing Technology 2002, 128 (1), 100–105.
   Web of Science ®Google Scholar
• El-Gallab, M.; Sklad, M. Machining of Al/SiC particulate metal matrix composites: part II: workpiece surface integrity. Journal of Materials Processing Technology 1998, 83 (1), 277–285.
   Web of Science ®Google Scholar
• Ciftci, I.; Turker, M.; Seker, U. Evaluation of tool wear when machining SiCp/-reinforced Al-2014 alloy matrix composites. Materials & Design 2004, 25 (3), 251–255.
   Web of Science ®Google Scholar
• Basavarajappa, S. Tool wear in turning of graphitic hybrid metal matrix composites. Materials and Manufacturing Processes 2009, 24 (4), 484–487.
   Web of Science ®Google Scholar
• Chambers, A.R. The machinability of light alloy MMCs. Composites Part A-Applied Science 1996, 27 (2), 143–147.
   Web of Science ®Google Scholar
• El-Gallab, M.; Sklad, M. Machining of Al/SiC particulate metal matrix composites part III: comprehensive tool wear models. Journal of Materials Processing Technology 2000, 101 (1), 10–20.
   Web of Science ®Google Scholar
• Kannan, S.; Kishawy, H.A. Surface characteristics of machined aluminium metal matrix composites. International Journal of Machine Tools and Manufacture 2006, 46 (15), 2017–2025.
   Web of Science ®Google Scholar
• Basavarajappa, S.; Chandramohan, G.; Prabu, M.; Mukund, K.; Ashwin, M. Drilling of hybrid metal matrix composites—Workpiece surface integrity. International Journal of Machine Tools and Manufacture 2007, 47 (1), 92–96.
   Web of Science ®Google Scholar
• Andrewes, C.J.E.; Feng, H.-Y.; Lau, W.M. Machining of an aluminum/SiC composite using diamond inserts. Journal of Materials Processing Technology 2000, 102 (1), 25–29.
   Web of Science ®Google Scholar
• Weinert, K.; Lange, M.; Schroer, M. Machining of Light‐metal Matrix Composites. In Magnesium Alloys and Their Applications; Editor K. U. Kainer; Wiley-VCH:Weinheim, 2000; 412–417.
   Google Scholar
• Weinert, K.; König, W. A consideration of tool wear mechanism when machining metal matrix composites (MMC). CIRP Annals-Manufacturing Technology 1993, 42 (1), 95–98.
   Google Scholar
• Ferreira, J.R.; Coppini, N.L.; Miranda, G.W.A. Machining optimization in carbon fibre reinforced composite materials. Journal of Materials Processing Technology 1999, 92, 135–140.
   Google Scholar
• Paulo Davim, J.; Monteiro Baptista, A. Relationship between cutting force and PCD cutting tool wear in machining silicon carbide reinforced aluminium. Journal of Materials Processing Technology 2000, 103 (3), 417–423.
   Web of Science ®Google Scholar
• Teti, R. Machining of composite materials. CIRP Annals-Manufacturing Technology 2002, 51 (2), 611–634.
   Web of Science ®Google Scholar
• Komanduri, R. Machining of fiber-reinforced composites. Machining Science and Technology 1997, 1 (1), 113–152.
   Web of Science ®Google Scholar
• Hung, N.P.; Venkatesh, V.C.; Loh, N.L. Machining of metal matrix composites. Manufacturing Engineering And Materials Processing 1999, 53, 295–356.
   Google Scholar
• Ferreira, J.R.; Coppini, N.L.; Miranda, G.W.A. Machining optimization in carbon fibre reinforced composite materials. Journal of Materials Processing Technology 1999, 92, 135–140.
   Google Scholar
• Hung, N.P.; Venkatesh, V.C.; Loh, N.L. Cutting tools for metal matrix composites. Key Engineering Materials 1997, 138, 289–326.
   Google Scholar
• Looney, L.A.; Monaghan, J.M.; O'Reilly, P.; Taplin, D.M.R. The turning of an Al/SiC metal-matrix composite. Journal of Materials Processing Technology 1992, 33 (4), 453–468.
   Web of Science ®Google Scholar
• Coelho, R.T.; Aspinwall, D.K.; Wise, M.L.H. Drilling and reaming aluminium-based metal matrix composites (MMC) using PCD tooling. In Trans North American Manufacturing Research Institution/society of manufacturing engineers (NAMRI/SME), Northwestern University, Evanston, IL, May 25–27, 1994.
   Google Scholar
• Coelho, R.T.; Yamada, S.; Aspinwall, D.K.; Wise, M.L.H. The application of polycrystalline diamond (PCD) tool materials when drilling and reaming aluminium based alloys including MMC. International Journal of Machine Tools and Manufacture 1995, 35 (5), 761–774.
   Web of Science ®Google Scholar
• Lane, C. Machining characteristics of particulate-reinforced aluminum, In: Fabrication of particle reinforced metal composites. ASM: Ohio; 1990: 195–201.
   Google Scholar
• Jawaid, A.; Barnes, S.; Ghadimzadeh, S.R. Drilling of particulate aluminum silicon carbide metal matrix composites. In Machining of composite materials (A 95–15178 02–37), Materials Park, OH, ASM International, 1992, 1992; 35–47.
   Google Scholar
• Songmene, V.; Balazinski, M. Machinability of graphitic metal matrix composites as a function of reinforcing particles. CIRP Annals-Manufacturing Technology 1999, 48 (1), 77–80.
   Google Scholar
• Songmene, V.; Stephenson, T.F.; Waner, A.E.M. Machinability of graphitic silicon carbide aluminum metal matrix composite GrA–NiTM. In ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, 1997.
   Google Scholar
• Rohatgi, P.K.; Narendranath, C.S. Tribological Properties of Al-Si-Gr-SiC Hybrid Composite. Proc. of ASM Materials Congress, Pittsburgh, PA, 1993, 17–25.
   Google Scholar
• Ames, W.; Alpas, A.T. Sliding wear of an Al-Si alloy reinforced with silicon carbide particles and graphite flakes. Friction and wear technology for advanced composite materials (A 96–16704 03–24), ASM International: Materials Park, OH, 1995; 27–35.
   Google Scholar
• Cronjäger, L.; Meister, D. Machining of fibre and particle-reinforced aluminium. CIRP Annals-Manufacturing Technology 1992, 41 (1), 63–66.
   Google Scholar
• Vaccari, J.A.; Lane, C.T. Machining a New Breed of Aluminum. American Machinist 1993, 11, 56–60.
   Google Scholar
• Zhong, Z.W. Grinding of aluminium-based metal matrix composites reinforced with Al2O3 or SiC particles. The International Journal of Advanced Manufacturing Technology 2003, 21 (2), 79–83.
   Web of Science ®Google Scholar
• Zhong C.H Machinability of metal matrix composites, Thesis; Nanyang Technological University: Singapore, 1996.
   Google Scholar
• Quan, Y.; Ye, B. The effect of machining on the surface properties of SiC/Al composites. Journal of Materials Processing Technology 2003, 138 (1), 464–467.
   Web of Science ®Google Scholar
• Pramanik, A.; Zhang, L.C.; Arsecularatne, J.A. Prediction of cutting forces in machining of metal matrix composites. International Journal of Machine Tools and Manufacture 2006, 46 (14), 1795–1803.
   Web of Science ®Google Scholar
• Mohd Abbas, N.; Solomon, D.G.; Fuad Bahari, M. A review on current research trends in electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture 2007, 47 (7), 1214–1228.
   Web of Science ®Google Scholar
• Ho, K.H.; Newman, S.T. State of the art electrical discharge machining (EDM). International Journal of Machine Tools and Manufacture 2003, 43 (13), 1287–1300.
   Web of Science ®Google Scholar
• Ramasawmy, H.; Blunt, L. Effect of EDM process parameters on 3D surface topography. Journal of Materials Processing Technology 2004, 148 (2), 155–164.
   Web of Science ®Google Scholar
• Houman, L. Total EDM. In Electrical Discharge Machining: Tooling, Methods and Applications; SME: Dearborn, MI, 1983; 5–19.
   Google Scholar
• Webzell, S. ‘That first step into EDM. In: Machinery, 159. 4040 Findlay Publications Ltd: Kent, November 2001; 41.
   Google Scholar
• Anonymous. History and development. In The Techniques and Practice of Spark Erosion Machining. Sparcatron Limited: Gloucester, UK, 1965; 6.
   Google Scholar
• Garg, R.K.; Singh, K.K.; Sachdeva, A.; Sharma, V.S.; Ojha, K.; Singh, S. Review of research work in sinking EDM and WEDM on metal matrix composite materials. The International Journal of Advanced Manufacturing Technology 2010, 50 (5–8), 611–624.
   Web of Science ®Google Scholar
• Rajurkar, K.P. Nontraditional manufacturing processes. In Handbook of Design, Manufacturing and Automation; Dorf, R. C., and Kusiak, A., Eds.; John Wiley & Sons, Inc.: Hoboken, NJ, 1994.
   Google Scholar
• Kansal, H.K.; Singh, S.; Kumar, P. Technology and research developments in powder mixed electric discharge machining (PMEDM). Journal of Materials Processing Technology 2007, 184 (1), 32–41.
   Web of Science ®Google Scholar
• Uno, Y.; Okada, A. Surface generation mechanism in electrical discharge machining with silicon powder mixed fluid. International Journal of Electrical Machining 1997, 2, 13–18.
   Google Scholar
• Uno, Y.; Okada, A.; Hayashi, Y.; Tabuchi, Y. Surface integrity in EDM of aluminum bronze with nickel powder mixed fluid. Journal of Japanese Society of Electrical Machining Engineers 1998, 32 (70), 24–31.
   Google Scholar
• Sidhu, S.S.; Batish, A.; Kumar, S. Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM). Materials and Manufacturing Processes 2014, 29 (1), 46–52.
   Web of Science ®Google Scholar
• Erden, A.; Bilgin, S. Role of impurities in electric discharge machining. In Proceedings of the 21st international machine tool design and research conference, Macmillan, London, 1980.
   Google Scholar
• Jeswani, M.L. Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining. Wear 1981, 70 (2), 133–139.
   Web of Science ®Google Scholar
• Zhixin, J.; Jianhua, Z.; Xing, A. Ultrasonic vibration pulse electro-discharge machining of holes in engineering ceramics. Journal of Materials Processing Technology 1995, 53 (3), 811–816.
   Web of Science ®Google Scholar
• Hitoshi, O.; Teruo, N.; Iwao, M. Study of Micro Machining of Metals by EDM with High Frequency Vibration; Takushima Prefectural Industrial Technology Center: Tokushima, 2001.
   Google Scholar
• Stovicek, D.R. The state-of-the-art EDM science. In Tooling and Production; Nelson Publishing: Lakewood, OH, 1993; 42.
   Google Scholar
• Ramasawmy, H.; Blunt, L.; Effect of EDM process parameters on 3D surface topography. Journal of Materials Processing Technology, 2004, 148, 155–164.
   Web of Science ®Google Scholar
• Shrivastava, P.K.; Dubey, A.K. Electrical discharge machining–based hybrid machining processes: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2014, 228 (6), 799–825.
   Web of Science ®Google Scholar
• Jain, V.K. Advanced Machining Processes; Allied Publishers: New Delhi, India, 2009.
   Google Scholar
• Guo, Z.N.; Lee, T.C.; Yue, T.M.; Lau, W.S. A study of ultrasonic aided wire electrical discharge machining. Journal of Materials Processing Technology, 1997, 63, 823–828.
   Web of Science ®Google Scholar
• Zhang, J.H.; Lee, T.C.; Lau, W.S.; Ai, X. Spark erosion with ultrasonic frequency. Journal of Materials Processing Technology 1997, 68, 83–88.
   Web of Science ®Google Scholar
• Huang, H.; Zhang, H.; Zhou, L.; Zheng, H.Y. Ultrasonic vibration assisted electro-discharge machining of microholes in Nitinol. Journal of Micromechanics and Micro Engineering, 2003, 13, 693–700.
   Web of Science ®Google Scholar
• Egashira, K.; Masuzawa, T. Micro ultrasonic machining by the application of work piece vibration. CIRP Annals—Manufacturing Technology, 1999, 48, 131–134.
   Google Scholar
• Rajurkar, K.P.; Yu, Z.Y. 3D micro-EDM using CAD/CAM. Annals of CIRP 2000, 49 (1), 127–130.
   Google Scholar
• Masuzawa, T.; Fujino, M.; Kobayashi, K. Wire electro-discharge grinding for micro-machining. Annals of CIRP 1985, 34 (1), 431–434.
   Google Scholar
• Masuzawa, T.; Kuo, C.L.; Fujino, M. A combined electrical machining process for micro nozzle fabrication. Annals of CIRP 1994, 43 (1), 189–192.
   Google Scholar
• Yu, Z.Y.; Masuzawa, T.; Fujino, M. Micro-EDM for three dimensional cavities—development of uniform wear method. Annals of CIRP 1998, 47 (1), 169–172.
   Google Scholar
• Zhang, Q.H.; Du, R.; Zhang, J.H.; Zhang, Q.B. An investigation of ultrasonic-assisted electrical discharge machining in gas. International Journal of Machine Tools and Manufacture 2006, 46 (12), 1582–1588.
   Web of Science ®Google Scholar
• Yu, Z.B.; Jun, T.; Masanori, K. Dry electrical discharge machining of cemented carbide. Journal of Materials Processing Technology 2004, 149, 353–357.
   Web of Science ®Google Scholar
• Kunieda, M.; Miyoshi, Y.; Takaya, T.; Nakajima, N.; Bo, Y.Z.; Yoshida, M. High speed 3D milling by dry EDM. CIRP Annals—Manufacturing Technology 2003, 52, 147–150.
   Web of Science ®Google Scholar
• Wong, Y.S.; Lim, L.C.; Rahuman, I.; Tee, W.M. Near-mirror-finish phenomenon in EDM using powder-mixed dielectric. Journal of Materials Processing Technology 1998, 79, 30–40.
   Web of Science ®Google Scholar
• Yan, B.H.; Lin, Y.C.; Huang, F.Y.; Wang, C.H. Surface modification of SKD 61 during EDM with metal powder in the dielectric. Materials Transactions 2001, 42, 2597–2604.
   Web of Science ®Google Scholar
• Jeswani, M.L. Electrical discharge machining in distilled water. Wear 1981, 72, 81–88.
   Web of Science ®Google Scholar
• Tariq Jilani, S.; Pandey, P.C. Experimental investigations into the performance of water as dielectric in EDM. International Journal of Machine Tool Design and Research 1984, 24, 31–43.
   Web of Science ®Google Scholar
• Hocheng, H.; Lei, W.T.; Hsu, H.S. Preliminary study of material removal in electrical-discharge machining of SiC/Al. Journal of Materials Processing Technology 1997, 63 (1), 813–818.
   Web of Science ®Google Scholar
• Müller, F.; Monaghan, J. Non-conventional machining of particle reinforced metal matrix composites. Journal of Materials Processing Technology 2001, 118 (1), 278–285.
   Web of Science ®Google Scholar
• Muller, F.; Monaghan, J. Electro discharge machining of particle reinforced metal matrix composite. In Proceedings if 12th International symposium for electro machining (ISEM XII), VDI, Berichte 1405, Aachen, Germany, 1993; 513–522.
   Google Scholar
• Seo, Y.W.; Kim, D.; Ramulu, M. Electrical discharge machining of functionally graded 15–35 vol% SiCp/Al composites. Materials and Manufacturing Processes 2006, 21 (5), 479–487.
   Web of Science ®Google Scholar
• Patel, K.M.; Pandey, P.M.; Venkateswara Rao, P. Understanding the role of weight percentage and size of silicon carbide particulate reinforcement on electro-discharge machining of aluminium-based composites. Materials and Manufacturing Processes 2008, 23 (7), 665–673.
   Web of Science ®Google Scholar
• Yan, B.H.; Wang, C.C.; Liu, W.D.; Huang, F.Y. Machining characteristics of Al2O3/6061Al composite using rotary EDM with a disklike electrode. International Journal of Advanced Manufacturing Technology 2000, 16 (5), 322–333.
   Web of Science ®Google Scholar
• Mamalis, A.G.; Vaxevanidis, N.M.; Pantelis, D.I. On the electro discharge machining of ceramic plasma-sprayed steel plates. Annals of CIRP 1992, 41 (1), 235–238.
   Google Scholar
• Muller, F. Non-conventional machining of particle reinforced metal matrix composite. International Journal of Machine Tools and Manufacture 2000, 40 (9), 1351–1366.
   Web of Science ®Google Scholar
• Mahdavinejad, R.A.; Mahdavinejad, A. ED machining of WC–Co. Journal of Materials Processing Technology 2005, 162, 637–643.
   Web of Science ®Google Scholar
• Chiang, K.-T. Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al2O3+TiC mixed ceramic. International Journal of Advanced Manufacturing Technology 2009, 37, 523–533.
   Web of Science ®Google Scholar
• Ramulu, M.; Jenkins, M.G.; Daigneault, J.A. Spark-erosion process effects on the properties and performance of TiB2 particulate-reinforced/SiC matrix ceramic composite. Ceramic Engineering and Science Proceedings 1997, 8, 227–238.
   Google Scholar
• Thomson, P.F. Surface damage in electro-discharge machining. Journal of Materials Science and Technology 1989, 5, 1153–1157.
   Web of Science ®Google Scholar
• Lee, L.C.; Lim, L.C.; Wong, Y.S.; Lu, H.H. Towards a better understanding of the surface features of electro discharge machined tool steel. Journal of Materials Science and Technology 1990, 24, 513–523.
   Web of Science ®Google Scholar
• Rhoades, L.J. Abrasive flow machining [AFM]. Manufacturing Engineering 1988, 101 (5), 75–78.
   Web of Science ®Google Scholar
• Kalpakjian, S.; Schmid, S.; Manufacturing Engineering and Technology; Prentice Hall: New Jersey, Asia, 2000.
   Google Scholar
• Jain, V.K. Magnetic field assisted abrasive based micro-/nano-finishing. Journal of Materials Processing Technology 2009, 209 (20), 6022–6038.
   Web of Science ®Google Scholar
• Benedict, G.F. Nontraditional Manufacturing Processes; Marcel Dekker: New York, 1987.
   Google Scholar
• Kim, J.D.; Kim, K.D. De-burring of burrs in spring collets by abrasive flow machining. International Journal of Advanced Manufacturing Technology 2004, 24, 469–473.
   Web of Science ®Google Scholar
• Jung, D.; Wang, W.L.; Jack Hu, S. Microscopic geometry changes of a direct-injection diesel injector nozzle due to abrasive flow machining and a numerical investigation of its effects on engine performance and emissions. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2008, 222 (2), 241–252.
   Web of Science ®Google Scholar
• Sankar, M.R.; Jain, V.K.; Ramkumar, J. Abrasive flow machining (AFM): An overview. In INDO-US Workshop on Smart Machine Tools Intelligent Machining Systems and Multi-scale Manufacturing, PSG College, Coimbatore, India, December 2008.
   Google Scholar
• Kozak, J.; Oczos, K. Selected problems of abrasive hybrid machining. Journal of Materials Processing Technology 2001, 109, 360–366.
   Web of Science ®Google Scholar
• Hamatani, G.; Ramulu, L.A. Machinability of high temperature composites by abrasive waterjet. Journal of Engineering Materials and Technology 1990, 112 (4), 381–386.
   Web of Science ®Google Scholar
• Jain, V.K.; Adsul, S.G. Experimental investigations into abrasive flow machining (AFM). International Journal of Machine Tools and Manufacture 2000, 40 (7), 1003–1021.
   Web of Science ®Google Scholar
• Williams, R.E.; Rajurkar, K.P. Stochastic modeling and analysis of abrasive flow machining. Journal of Manufacturing Science and Engineering 1992, 114 (1), 74–81.
   Web of Science ®Google Scholar
• Wang, A.C.; Weng, S.H. Developing the polymer abrasive gels in AFM process. Journal of Materials Processing Technology 2007, 192, 486–490.
   Web of Science ®Google Scholar
• Sankar, M.R.; Ramkumar, J.; Jain, V.K. Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process. Wear 2009, 266 (7), 688–698.
   Web of Science ®Google Scholar
• Sankar, M.R.; Jain, V.K.; Ramkumar, J. Experimental investigations into rotating workpiece abrasive flow finishing. Wear 2009, 267 (1), 43–51.
   Web of Science ®Google Scholar
• Müller, F.; Monaghan, J. Non-conventional machining of particle reinforced metal matrix composite. International Journal of Machine Tools and Manufacture 2000, 40 (9), 1351–1366.
   Web of Science ®Google Scholar
• Shanmugam, D.K.; Chen, F.L.; Siores, E.; Brandt, M. Comparative study of jetting machining technologies over laser machining technology for cutting composite materials. Composite Structures 2002, 57 (1), 289–296.
   Web of Science ®Google Scholar
• Vicario, I.; Gonzalo, O.; Bengoetxea, I. Rotary ultrasonic machining of aluminium oxide ceramics: designed experiments. International Journal of Machining and Machinability of Materials 2007, 2 (2), 233–243.
   Google Scholar
• Schubert, A.; Nestler, A.; Pinternagel, S.; Zeidler, H. Influence of ultrasonic vibration assistance on the surface integrity in turning of the aluminium alloy AA2017. Materialwissenschaft und Werkstofftechnik 2011, 42 (7), 658–665.
   Web of Science ®Google Scholar
• Liang, Z.; Wu, Y.; Wang, X.; Zhao, W. A new two-dimensional ultrasonic assisted grinding (2D-UAG) method and its fundamental performance in monocrystal silicon machining. International Journal of Machine Tools and Manufacture 2010, 50 (8), 728–736.
   Web of Science ®Google Scholar
• Liu, K.; Li, X.P.; Rahman, M. Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide. The International Journal of Advanced Manufacturing Technology 2008, 35 (7–8), 833–841.
   Web of Science ®Google Scholar
• Dornfeld, D.; Min, S.; Takeuchi, Y. Recent advances in mechanical micromachining. CIRP Annals-Manufacturing Technology 2006, 55 (2), 745–768.
   Web of Science ®Google Scholar
• Chen, Y.-F.; Lin, Y.C. Surface modifications of Al–Zn–Mg alloy using combined EDM with ultrasonic machining and addition of TiC particles into the dielectric. Journal of Materials Processing Technology 2009, 209 (9), 4343–4350.
   Web of Science ®Google Scholar
• Praneetpongrung, C.; Fukuzawa, Y.; Nagasawa, S.; Yamashita, K. Effects of the EDM combined ultrasonic vibration on the machining properties of Si3N4. Materials Transactions 2010, 51 (11), 2113.
   Web of Science ®Google Scholar
• Tong, H.; Yong, L.; Yang, W. Experimental research on vibration assisted EDM of micro-structures with non-circular cross-section. Journal of Materials Processing Technology 2008, 208, 289–298.
   Web of Science ®Google Scholar
• Ding, H.; Shin, Y.C. Laser-assisted machining of hardened steel parts with surface integrity analysis. International Journal of Machine Tools and Manufactures 2010, 50 (1), 106–114.
   Web of Science ®Google Scholar
• Li, L.; Diver, C.; Atkinson, J.; Giedl-Wagner, R.; Helml, H.J. Sequential laser and EDM micro-drilling for next generation fuel injection nozzle manufacture. CIRP Annals-Manufacturing Technology 2006, 55 (1), 179–182.
   Web of Science ®Google Scholar
• Attia, H.; Tavakoli, S.; Vargas, R.; Thomson, V. Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Annals-Manufacturing Technology 2010, 59 (1), 83–88.
   Web of Science ®Google Scholar
• Lei, S.; Shin, Y.C.; Incropera, F.P. Experimental investigation of thermo-mechanical characteristics in laser-assisted machining of silicon nitride ceramics. Journal of Manufacturing Science and Engineering 2001, 123 (4), 639–646.
   Web of Science ®Google Scholar
• Kuo, C-L.; Huang, J-D.; Liang, H.-Y. Fabrication of 3D metal microstructures using a hybrid process of micro-EDM and laser assembly. The International Journal of Advanced Manufacturing Technology 2003, 21 (10–11), 796–800.
   Web of Science ®Google Scholar
• Chang, C.-W.; Kuo, C.-P. An investigation of laser-assisted machining of Al2O3 ceramics planning. International Journal of Machine Tools and Manufacture 2007, 47 (3), 452–461.
   Web of Science ®Google Scholar
• Kaminski, J.; Alvelid, B. Temperature reduction in the cutting zone in water-jet assisted turning. Journal of Materials Processing Technology 2000, 106 (1), 68–73.
   Web of Science ®Google Scholar
• Sharman, A.R.C.; Hughes, J.I.; Ridgway, K. Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2008, 222 (6), 653–664.
   Web of Science ®Google Scholar
• Pusavec, F.; Hamdi, H.; Kopac, J.; Jawahir, I.S. Surface integrity in cryogenic machining of nickel based alloy—Inconel 718. Journal of Materials Processing Technology 2011, 211 (4), 773–783.
   Web of Science ®Google Scholar
• Clement, J.P.; Rack, H.J.; Wu, K.T.; Spencer, H.G. Interfacial modification in metal matrix composites by the sol-gel process. Material And Manufacturing Processes 1990, 5 (1), 17–33.
   Google Scholar
• Ullbrand, J.M.; Córdoba, J.M.; Tamayo-Ariztondo, J.; Elizalde, M.R.; Nygren, M.; Molina-Aldareguia, J.M.; Odén, M. Thermomechanical properties of copper–carbon nanofibre composites prepared by spark plasma sintering and hot pressing. Composites Science and Technology 2010, 70 (16), 2263–2268.
   Web of Science ®Google Scholar