Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 31, 2016 - Issue 7
Submit an article Journal homepage
317
Views
13
CrossRef citations to date
0
Altmetric
Original Articles

Micromilling of Lamellar Ti6Al4V: Cutting Force Analysis

M. GelfiDepartment of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
,
A. AttanasioDepartment of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
,
E. CerettiDepartment of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
,
A. GarbelliniDepartment of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy
&
A. PolaDepartment of Mechanical and Industrial Engineering, University of Brescia, Brescia, ItalyCorrespondence[email protected]
Pages 919-925 | Received 24 Feb 2015, Accepted 08 May 2015, Published online: 29 Dec 2015

REFERENCES

  • Masuzawa, T. State of the art of micromachining. CIRP Annals Manufacturing Technology 2000, 49 (2), 473–488.
  • Liu, Z.; Shi Zhenyu, Z.; Wan, Y. Definition and determination of the minimum uncut chip thickness of microcutting. International Journal of Advanced Manufacturing Technology 2013, 69, 1219–1232.
  • Komatsu, T.; Yoshino, T.; Matsumura, T.; Torizuka, S. Effect of crystal grain size in stainless steel on cutting process in micromilling. In Proceedings 5th CIRP Conference on High Performance Cutting, Zurich, Switzerland, June 4–7, 2012; 1 (1). 150–155.
  • Mamedov, A.; Ehsan Layegh, S.; Lazoglu, K.I. Machining forces and tool deflections in micro milling. In Proceedings 12th CIRP Conference Modeling of Machining Operations, Turin, Italy, June 13–14, 2013; 147–151.
  • Li, K.M.; Chou, S.Y. Experimental evaluation of minimum quantity lubrication in near micro-milling. Journal of Materials Processing Technology 2010, 210 (15), 2163–2170.
  • Monroy-Vázquez, K.P.; Attanasio, A.; Ceretti, E.; Siller, H.R.; Hendrichs-Troeglen, N.J.; Giardini, C. Evaluation of superficial and dimensional quality features in metallic micro-channels manufactured by micro-end-milling. Materials 2013, 6 (4), 1434–1451.
  • Bissacco, G.; Hansen, H.N.; de Chiffre, L. Size effects on surface generation in micro milling of hardened tool steel. CIRP Annals Manufacturing Technology 2006, 55 (1), 593–596.
  • Altintas, Y.; Jin, X. Mechanics of micro-milling with round edge tools. CIRP Annals Manufacturing Technology 2011, 60 (1), 77–80.
  • Zaman, M.T.; Kumar, A.S.;. Rahman, M.; Sreeram, S. A three-dimensional analytical cutting force model for micro end milling operation. International Journal of Machine Tools & Manufacturing 2006, 46 (3–4), 353–366.
  • Thepsonthi, T.; Özel, T. Experimental and finite element simulation based investigations on micro-milling Ti-6Al-4V titanium alloy: Effects of cBN coating on tool wear. Journal of Materials Processing Technology 2013, 213 (4), 532–542.
  • Jin, X.; Altintas, Y. Prediction of micro-milling forces with finite element method. Journal of Materials Processing Technology 2012, 212 (3), 542–552.
  • Uhlmann, E.; Schauer, K. Dynamic load and strain analysis for the optimization of micro end mills. CIRP Annals Manufacturing Technology 2005, 54 (1), 75–78.
  • Lampman, S. Wrought titanium and titanium alloys. In Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th edition; ASM International: Russell Township, USA, 1990; Vol. 2.
  • Lütjering, G.; Williams, J.C. Titanium-Engineering Materials and Processes, 2nd edition; Springer: Berlin, Germany, 2007.
  • Leyens, C.; Peters, M. Titanium and Titanium Alloys – Fundamentals and Applications; WILEY-VCH Verlag GmbH: Weinheim, Germany, 2003.
  • Attanasio, A.; Gelfi, M.; Pola, A.; Ceretti, E.; Giardini, C. Influence of material microstructures in micromilling of Ti6Al4V alloy. Materials 2013, 6 (9), 4268–4283.
  • Malinov, S.; Sha, W.; Guo, Z.; Tang, C.C.; Long, A.E. Synchrotron X-ray diffraction study of the phase transformations in titanium alloys. Materials Characterization 2002, 48 (4), 279–295.
  • Jovanović, M.T.; Bobić, I.; Mišković, Z.; Zec, S. Precision cast Ti-based alloys – Microstructure and mechanical properties. Metallurgical & Materials Engineering 2009, 15 (1), 53–69.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.