Machinability Study of Laser Surface Treated 15-5 PH Stainless Steel

REFERENCES

• Hsiao, C.N.; Chiou, C.S.; Yang, J.R. Aging reactions in a 17–4 PH stainless steel. Materials Chemistry and Physics 2002, 74, 134–142.
   Web of Science ®Google Scholar
• Mondelin, Alexandre; Valiorgue, Frederic; Rech, Joel; Coret, Michel; Feulvarch, Eric. Hybrid model for the prediction of residual stresses induced by 15–5 PH steel turning. International Journal of Mechanical Sciences 2012, 58, 69–85.
   Web of Science ®Google Scholar
• Selvaraj, D.P.; Chandramohan, P.; Mohanraj, M. Optimization of surface roughness, cutting force and tool wear of nitrogen alloyed duplex stainless steel in a dry turning process using Taguchi method. Measurement 2014, 49, 205–215.
   Web of Science ®Google Scholar
• Aouici, Hamdi; Yallese, Mohamed Athmane; Chaoui, Kamel; Mabrouki, Tarek; Rigal, Jean-Francois. Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization. Measurement 2012, 45, 344–353.
   Web of Science ®Google Scholar
• Bouacha, K.; Yallese, M.A.; Mabrouki, T.; Rigal, J.F. Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool. International Journal of refractory metals and hard Materials 2010, 28, 349–361.
   Web of Science ®Google Scholar
• Krolczyk, G.; Nieslony, P.; Legutko, S. Microhardness and surface integrity in turning process of duplex stainless steel (DSS) for different cutting conditions. Journal of Materials Engineering and Performance 2014, 23, 859–866.
   Web of Science ®Google Scholar
• Krolczyk, G.; Legutko, S.; Stoic, A. Influence of cutting parameters and conditions onto surface hardness of duplex stainless steel after turning process. Tehnicki Vjesnik 2013, 20 (6), 1077–1080.
   Web of Science ®Google Scholar
• Oliveira, C.A. Jr.; Diniz, A.E.; Bertazzoli, R. Correlating tool wear, surface roughness and corrosion resistance in the turning process of super duplex stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2014, 36, 775–785. doi:10.1007/s40430-013-0119-6.
   Web of Science ®Google Scholar
• Krolczyk, G.M.; Nieslony, P.; Legutko, S. Determination of tool life and research wear during duplex stainless steel turning. Archives of Civil and Mechanical Engineering 2015, 15, 347–354.
   Web of Science ®Google Scholar
• Suresh, R.; Basavarajappa, S.; Gaitonde, V.N.; Samuel, G.L. Machinability investigations on hardened AISI 4340 steel using coated carbide insert. International Journal of Refractory Metals and Hard Materials 2012, 33, 75–86.
   Web of Science ®Google Scholar
• Ding, H.; Shin, Y.C. Laser-assisted machining of hardened steel parts with surface integrity analysis. International Journal of Machine Tools and Manufacture 2010, 50 (1), 106–114.
   Web of Science ®Google Scholar
• Bermingham, M.J.; Kent, D.; Dargusch, M.S. A new understanding of the wear processes during laser assisted milling 17–4 precipitation hardened stainless steel. Wear 2015, 328–329, 518–530.
   Web of Science ®Google Scholar
• Bermingham, M.J.; Palanisamy, S.; Dargusch, M.S. Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. International Journal of Machine Tools and Manufacture 2012, 62, 76–87.
   Web of Science ®Google Scholar
• Khani, Salman; Farahnakian, Masoud; Razfar, Mohammad Reza. Experimental study on hybrid cryogenic and plasma-enhanced turning of 17–4PH stainless steel. Materials and Manufacturing Processes 2015, 30, 868–874.
   Web of Science ®Google Scholar
• RahmanRashid, R.A.; Sun, S.; Wanga, G.; Dargusch, M.S. An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy. International Journal of Machine Tools and Manufacture 2012, 63, 58–69.
   Web of Science ®Google Scholar
• Atta, H.; Tavakoli, S.; Vargas, R.; Thomson, V. Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Annals – Manufacturing Technology 2010, 59, 83–88.
   Web of Science ®Google Scholar
• Ranganathan, S.; Senthilvelan, T.; Sriram, G. Evaluation of machining parameters of hot turning of stainless steel (Type 316) by applying ANN and RSM. Materials and Manufacturing Processes 2010, 25, 1131–1141.
   Web of Science ®Google Scholar
• Navas, Virginia Garciab; Arriola, Iban; Gonzalo, Oscar; Leunda, Josu. Mechanisms involved in the improvement of Inconel 718 machinability by laser assisted machining (LAM). International Journal of Machine Tools and Manufacture 2013, 74, 19–28.
   Web of Science ®Google Scholar
• Chikarakara, E.; Naher, S.; Brabazon, D. Analysis of microstructural changes during pulsed CO2 laser surface processing of AISI 316 L stainless steel. Advanced Materials Research 2011, 264–265, 1401–1408.
   Google Scholar
• Ding, Hongtao; Yung Shin, C. Laser-assisted machining of hardened steel parts with surface integrity analysis. International Journal of Machine Tools and Manufacture 2010, 50, 106–114.
   Web of Science ®Google Scholar
• Raghavan, Sathyanarayan; Melkote, Shreyas; Hashimoto, Fulko. Laser tempering based turning process for efficient machining of hardened AISI 52100 steel. Journal of Manufacturing Processes 2013, 15, 318–328.
   Web of Science ®Google Scholar
• Mahmoudi, B.; Torkamany, M.J.; Sabour Rouh Aghdam, A.R.; Sabbaghzade, J. Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd: YAG laser. Materials & Design 2010, 31, 2553–2560.
   Web of Science ®Google Scholar
• Yao, Chengwu; Xu, Binshi; Huang, Jian; Zhang, Peilei; Wu, Yixiong. Study on the softening in overlapping zone by laser-overlapping scanning surface hardening for carbon and alloyed steel. Optics and Lasers in Engineering 2010, 48, 20–26.
   Web of Science ®Google Scholar
• Venkatesan, K.; Ramanujam, R.; Kuppan, P. Laser assisted machining of difficult to cut materials: Research opportunities and future directions – A comprehensive review. Procedia Engineering 2014, 97, 1626–1636.
   Google Scholar
• Pal, Awadhesh; Choudhury, S.K.; Chinchanikar, Satish. Machinability assessment through experimental investigation during hard and soft turning of hardened steel. Procedia Materials Science 2014, 6, 80–91.
   Google Scholar
• Pervaiz, Salman; Rashid, Amir; Deiab, Ibrahim; Nicolescu, Mihai. Influence of tool materials on machinability of titanium and nickel-based alloys: A review. Materials and Manufacturing Processes 2014, 29, 219–252.
   Web of Science ®Google Scholar
• Mohanty, A.; Gangopadhyay, S.; Thakur, A. On applicability of multilayer coated tool in dry machining of aerospace grade stainless steel. Materials and Manufacturing Processes 2015, 1070413. doi:10.1080/10426914.
   Web of Science ®Google Scholar