Influence of Cerium on Microstructure and Solidification of Eutectic Al–Si Piston Alloy

REFERENCES

• Wang, E.R.; Hui, X.D.; Chen, G.L. Eutectic Al–Si–Cu–Fe–Mn alloys with enhanced mechanical properties at room and elevated temperature. Materials & Design 2011, 32, 4333–4340.
   Web of Science ®Google Scholar
• Manasijevic, S.; Radisa, R.; Markovic, S.; Acimovic-Pavlovic, Z.; Raic, K. Thermal analysis and microscopic characterization of the piston alloy AlSi13Cu4Ni2Mg. Intermetallics 2011, 19, 486–492.
   Web of Science ®Google Scholar
• Ahmad, R.; Asmael, M.B.A.; Ourdjini, A. Effect of high cerium and lanthanum on impact toughness of Al-11Si-Cu eutectic cast alloy. Applied Mechanics and Materials 2014, 660, 195–198.
   Google Scholar
• Ibrahim, M.F.; Samuel, E.; Samuel, A.M.; Al-Ahmari, A.M.A.; Samuel, F.H. Impact toughness and fractography of Al–Si–Cu–Mg base alloys. Materials & Design 2011, 32, 2130–2142.
   Web of Science ®Google Scholar
• Swamy, N.H.S.; Joseph, M.A.; Nagarajan, N.M.; Sudarsan, N. Effects of rapid heating on microstructure and mechanical properties of modified vibrated Al–Si–Mg alloys using a fluidized bed. Materials and Manufacturing Processes 2011, 26, 210–217.
   Web of Science ®Google Scholar
• Samuel, A.M.; Doty, H.W.; Valtierra, S.; Samuel, F.H. Effect of grain refining and Sr-modification interactions on the impact toughness of Al–Si–Mg cast alloys. Materials & Design 2014, 56, 938–946.
   Web of Science ®Google Scholar
• Zhang, J.; Yu, H.; Kang, S.B.; Cho, J.H.; Min, G. Electron backscattered diffraction analysis of eutectic solidification in a continuous cast aluminum alloy billet. Materials and Manufacturing Processes 2014, 29, 472–476.
   Web of Science ®Google Scholar
• Taylor, P.; Dwivedi, D.K.; Sharma, A.; Rajan, T.V. Influence of silicon morphology and mechanical properties of piston alloys. Materials and Manufacturing Processes 2005, 20, 777–791.
   Web of Science ®Google Scholar
• Zahedi, H.; Emamy, M.; Razaghian, A.; Mahta, M.; Campbell, J.; Tiryakioğlu, M. The effect of Fe-rich intermetallics on the Weibull distribution of tensile properties in a cast Al-5% Si-3% Cu-1% Fe-0.3% Mg alloy. Metallurgical and Materials Transactions A 2007, 38, 659–670.
   Web of Science ®Google Scholar
• Zhang, X.; Sun, J.; Zhou, C.; Zhang, Y.; Ma, N.; Wang, H. Improvement of grain refinement efficiency in pure aluminum by embryos proliferation. Materials and Manufacturing Processes 2014, 29, 826–831.
   Web of Science ®Google Scholar
• Zedan, Y.; Samuel, F.; Samue, A.; Doty, H. Effects of Fe intermetallics on the machinability of heat- treated Al–(7–11)% Si alloys. Journal of Materials Processing Technology 2010, 210, 245–257.
   Web of Science ®Google Scholar
• Karimian, M.; Ourdjini, A.; Idris, M.H.; Asmael, M.B.A. Effect of pouring temperature and melt treatment on microstructure of lost foam casting of AL-Si LM6 alloy. Advanced Materials Research 2011, 264–265, 295–300.
   Google Scholar
• Nikanorov, S.P.; Volkov, M.P.; Gurin, V.N.; Burenkov, Y.A.; Derkachenko, L.I.; Kardashev, B.K.; Regel, L.L.; Wilcox, W.R. Structural and mechanical properties of Al–Si alloys obtained by fast cooling of a levitated melt. Materials Science and Engineering: A 2005, 390, 63–69.
   Web of Science ®Google Scholar
• Herrera, A.; Martinez-Madrid, M.; Horta, J.; Castaño, V.M. Effect of solidification times on crack opening displacement of aluminium alloy castings. Materials and Manufacturing Processes 2003, 18, 979–992.
   Web of Science ®Google Scholar
• Kores, S.; Vončina, M.; Kosec, B.; Mrvar, P.; Medved, J. Effect of cerium additions on the AlSi17 casting alloy. Materiali in tehnologije 2010, 44 (3), 137–140.
   Web of Science ®Google Scholar
• Vončina, M.; Kores, S.; Medved, J. Influence of Ce addition on solidification and mechanical properties of AlSi10Mg alloy. In Proceedings of Tofa 2010 Discussion Meeting on Thermodynamics, Porto, 2010; pp. 12–17.
   Google Scholar
• Vijayan, V.; Narayan Prabhu, K. Effect of chilling and cerium addition on microstructure and cooling curve parameters of Al–14%Si alloy. Canadian Metallurgical Quarterly 2015, 54, 66–76.
   Web of Science ®Google Scholar
• Hu, P.; Su, Y.; Chen, W.P.; Jiang, Y. Effects of Ce, Mn, Cr on the microstructure and properties of high-iron eutectic Al-Si piston alloy. Advanced Materials Research 2013, 652–654, 1023–1029.
   Google Scholar
• Xiao, D.H.H.; Wang, J.N.N.; Ding, D.Y.Y.; Yang, H.L.L. Effect of rare earth Ce addition on the microstructure and mechanical properties of an Al–Cu–Mg–Ag alloy. Journal of Alloys and Compounds 2003, 352, 84–88.
   Web of Science ®Google Scholar
• Li, Q.; Xia, T.; Lan, Y.; Zhao, W.; Fan, L.; Li, P. Effect of rare earth cerium addition on the microstructure and tensile properties of hypereutectic Al–20%Si alloy. Journal of Alloys and Compounds 2013, 562, 25–32.
   Web of Science ®Google Scholar
• Vončina, M.; Kores, S.; Mrvar, P.; Medved, J. Effect of Ce on solidification and mechanical properties of A360 alloy. Journal of Alloys and Compounds 2011, 509, 7349–7355.
   Web of Science ®Google Scholar
• Vončina, M.; Mrvar, P.; Petric, M.; Medved, J. Microstructure and grain refining performance of Ce on A380 alloy. Journal of Mining and Metallurgy, Section B: Metallurgy 2012, 48, 265–272.
   Web of Science ®Google Scholar
• Vončina, M.; Medved, J.; Bončina, T.; Zupanič, F. Effect of Ce on morphology of α(Al)–Al2Cu eutectic in Al–Si–Cu alloy. Transactions of Nonferrous Metals Society of China 2014, 24, 36–41.
   Web of Science ®Google Scholar
• Vončina, M.; Kores, S.; Mrvar, P.; Medved, J. Solidification and precipitation behaviour in the AlSi9Cu3 alloy with various Ce additions. Materials and Technology 2011, 45, 549–554.
   Web of Science ®Google Scholar
• Gurusamy, P.; Prabu, S.B.; Paskaramoorthy, R. Interfacial thermal resistance and the solidification behavior of the Al/SiCp composites. Materials and Manufacturing Processes 2015, 30, 381–386.
   Web of Science ®Google Scholar
• Ghandvar, H.; Farahany, S.; Idris, J. Wettability enhancement of SiCp in cast A356/SiCp composite using semisolid process. Materials and Manufacturing Processes 2015, 30, 1442–1449.
   Web of Science ®Google Scholar
• Nordin, N.A.; Farahany, S.; Abu Bakar, T.A.; Hamzah, E.; Ourdjini, A. Microstructure development, phase reaction characteristics and mechanical properties of a commercial Al–20%Mg2Si–xCe in situ composite solidified at a slow cooling rate. Journal of Alloys and Compounds 2015, 650, 821–834.
   Web of Science ®Google Scholar
• Li, J.H.; Wang, X.D.; Ludwig, T.H.; Tsunekawa, Y.; Arnberg, L.; Jiang, J.Z.; Schumacher, P. Modification of eutectic Si in Al–Si alloys with Eu addition. Acta Materialia 2015, 84, 153–163.
   Web of Science ®Google Scholar
• Ahmad, A.H.; Naher, S.; Brabazon, D. The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes 2014, 29, 134–139.
   Web of Science ®Google Scholar
• Das, P.; Kumar, M.; Samanta, S.K.; Dutta, P.; Ghosh, D. Semisolid processing of A380 Al alloy using cooling slope. Materials and Manufacturing Processes 2014, 29, 422–428.
   Web of Science ®Google Scholar
• Farahany, S.; Ourdjini, A. Effect of cooling rate and silicon refiner/modifier on solidification pathways of Al-11Si-2Cu-0.4Fe alloy. Materials and Manufacturing Processes 2013, 28, 657–663.
   Web of Science ®Google Scholar
• Ludwig, T.H.; Schaffer, P.L.; Arnberg, L. Influence of some trace elements on solidification path and microstructure of Al-Si foundry alloys. Metallurgical and Materials Transactions A 2013, 44, 3783–3796.
   Web of Science ®Google Scholar
• Ozawa, T. Thermal analysis – Review and prospect. Thermochimica Acta 2000, 355, 35–42.
   Web of Science ®Google Scholar
• Farahany, S.; Ourdjini, A.; Idris, M.H.; Shabestari, S.G. Computer-aided cooling curve thermal analysis of near eutectic Al–Si–Cu–Fe alloy. Journal of Thermal Analysis and Calorimetry 2013, 114, 705–717.
   Web of Science ®Google Scholar
• Farahany, S.; Idris, M.H.; Ourdjini, A.; Faris, F.; Ghandvar, H. Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis. Journal of Thermal Analysis and Calorimetry 2015, 119, 1593–1601.
   Web of Science ®Google Scholar
• Farahany, S.; Ourdjini, A.; Idrsi, M.H.; Shabestari, S.G. Evaluation of the effect of Bi, Sb, Sr and cooling condition on eutectic phases in an Al–Si–Cu alloy (ADC12) by in situ thermal analysis. Thermochimica Acta 2013, 559, 59–68.
   Web of Science ®Google Scholar
• Shabestari, S.G.; Ghodrat, S. Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis. Materials Science and Engineering: A 2007, 467, 150–158.
   Web of Science ®Google Scholar
• Qiu, H.; Yan, H.; Hu, Z. Effect of samarium (Sm) addition on the microstructures and mechanical properties of Al–7Si–0.7Mg alloys. Journal of Alloys and Compounds 2013, 567, 77–81.
   Web of Science ®Google Scholar
• Ludwig, T.H.; Schonhovd Dæhlen, E.; Schaffer, P.L.; Arnberg, L. The effect of Ca and P interaction on the Al–Si eutectic in a hypoeutectic Al–Si alloy. Journal of Alloys and Compounds 2014, 586, 180–190.
   Web of Science ®Google Scholar
• Li, J.H.; Schumacher, P. Effect of Y addition and cooling rate on refinement of eutectic Si in Al–5 wt-%Si alloys. International Journal of Cast Metals Research 2012, 25, 347–357.
   Web of Science ®Google Scholar
• Knuutinen, A.; Nogita, K.; Mcdonald, S.D.; Dahle, A.K. Modification of Al–Si alloys with Ba, Ca, Y and Yb. Journal of Light Metals 2002, 1, 229–240.
   Google Scholar
• Canales, A.A.; Talamantes-Silva, J.; Gloria, D.; Valtierra, S.; Colás, R. Thermal analysis during solidification of cast Al–Si alloys. Thermochimica Acta 2010, 510, 82–87.
   Web of Science ®Google Scholar
• Ibrahim, M.F.; Samuel, E.; Samuel, A.M.; Al-Ahmari, A.M.A.; Samuel, F.H. Metallurgical parameters controlling the microstructure and hardness of Al–Si–Cu–Mg base alloys. Materials & Design 2011, 32, 2130–2142.
   Web of Science ®Google Scholar
• Tsai, Y.C.; Lee, S.L.; Lin, C.K. Effect of trace Ce addition on the microstructures and mechanical properties of A356 (AL–7SI–0.35 Mg) aluminum alloys. Journal of the Chinese Institute of Engineers 2011, 34, 609–616.
   Web of Science ®Google Scholar
• Chang, J.Y.; Ko, H.S. Twin probability of eutectic Si in rare earth modified Al-7wt%Si alloy. Journal of Materials Science Letters 2000, 19, 197–199.
   Google Scholar
• Hu, Z.; Yan, H.; Rao, Y. Effects of samarium addition on microstructure and mechanical properties of as-cast Al-Si-Cu alloy. Transactions of Nonferrous Metals Society of China 2013, 23, 3228–3234.
   Web of Science ®Google Scholar
• Rao, Y.; Yan, H.; Hu, Z. Modification of eutectic silicon and β-Al5FeSi phases in as-cast ADC12 alloys by using samarium addition. Journal of Rare Earths 2013, 31, 916–922.
   Web of Science ®Google Scholar
• Yi, H.; Zhang, D. Morphologies of Si phase and La-rich phase in as-cast hypereutectic Al–Si–xLa alloys. Materials Letters 2003, 57, 2523–2529.
   Web of Science ®Google Scholar
• Kores, S.; Vončina, M.; Kosec, B.; Medved, J. Formation of AlFeSi phase in AlSi12 alloy with Ce addition. Metalurgija 2012, 51, 216–220.
   Web of Science ®Google Scholar
• Vijeesh, V.; Prabhu, K.N. Computer aided cooling curve analysis and microstructure of cerium added hypereutectic Al–Si (LM29) alloy. Transactions of the Indian Institute of Metals 2014, 67, 541–549.
   Web of Science ®Google Scholar
• Jiang, W.; Fan, Z.; Dai, Y.; Li, C. Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy. Materials Science and Engineering A 2014, 597, 237–244.
   Web of Science ®Google Scholar
• Mogucheva, A.; Zyabkin, D.; Kaibyshev, R. Effect of the thermomechanical processing on microstructure and properties of an Al-Ce alloy. Materials Science Forum 2012, 706–709, 361–366.
   Google Scholar
• Anasyida, A.S.; Daud, A.R.; Ghazali, M.J. Dry sliding wear behaviour of Al–12Si–4Mg alloy with cerium addition. Materials & Design 2010, 31, 365–374.
   Web of Science ®Google Scholar