Effect of physical vapor deposited bilayer (AlCrN + TiAlN) coating on high-speed steel single point cutting tool

References

• Sharma, A.V.N.L.; Satyanarayana Raju, P.; Gopichand, A.; Subbiah, K.V. Optimization of cutting parameters on mild steel with HSS & Cemented carbide tipped tools using Ann. International Journal of Research in Engineering and Technology 2012, 1, 226–228.
   Google Scholar
• Altuncu, E.; Ustel, F. Correlation between sputtering conditions and growth properties of (TiAl)N/AlN multilayer coatings. Materials and Manufacturing Processes 2009, 24, 796–799.
   Web of Science ®Google Scholar
• Venkatakrishna, K.; Chitharanjan Hegde, A. Composition modulated multilayer Zn-Fe alloy coatings on mild steel for better corrosion resistance. Materials and Manufacturing Processes 2011, 337, 29–36.
   Web of Science ®Google Scholar
• Saini, S.; Ahuja, I.S.; Sharma, V.S. Residual stresses, surface roughness and tool wear in hard turning. Materials and Manufacturing Processes 2011, 584, 583–598.
   Google Scholar
• Sargade, V.G.; Gangopadhyay, S.; Paul, Chattopadhyay A.K. Effect of coating thickness on the characteristics and dry machining performance of TiN film deposited on cemented carbide inserts using CFUBMS. Materials and Manufacturing Processes 2011, 26, 1028–1033.
   Web of Science ®Google Scholar
• EL-Hossainv, T.M.; El-Zoghby, A.A.; Badrc, M.A.; Maalawi, K.Y.; Nasr, M.F. Cutting parameter optimization when machining different materials. Materials and Manufacturing Processes 2010, 335, 1101–1114.
   Web of Science ®Google Scholar
• Chang, D.-Y.; Lin, S.-Y. Tool wear, hole characteristics, and manufacturing tolerance in Alumina ceramic micro drilling process. Materials and Manufacturing Processes 2012, 183, 306–313.
   Web of Science ®Google Scholar
• Joseph, A.; Braza, F. Review of surface modification technologies II. Materials and Manufacturing Processes 1989, 3, 349–352.
   Google Scholar
• Ogale, S.B.; Malshe, A.P.; Kanelkar, S.M. Deposition of diamond like and other special coatings by pulsed laser ablation and their post synthesis processing. Materials and Manufacturing Processes 2007, 8, 19–58.
   Google Scholar
• Okutomi, M. Sintering and coating of ceramics using carbon dioxide laser. Materials and Manufacturing Processes 2007, 6, 139–159.
   Google Scholar
• Pervaiz, S.; Rashid, A.; Deiab, I.; Nicolescu, M. Influence of tool materials on machinability of titanium and nickel based alloys. Materials and Manufacturing Processes 2014, 126, 219–252.
   Web of Science ®Google Scholar
• Bhaduri, D.A.; Chattopadhyay, K. Influence of grinding parameters and substrate bias voltage in dry surface grinding with TiN coated single layer galvanic CBN wheel. Materials and Manufacturing Processes 2011, 68, 982–990.
   Web of Science ®Google Scholar
• Rickerby, D.S.; Winstone, M.R. Coatings for gas turbines. Materials and Manufacturing Processes 2007, 26, 495–526.
   Google Scholar
• Hao, Z.-P.; Lu, Y.; Gao, D.; Fan, Y.-H.; Chang, Y.-L. Cutting parameter optimization based on optimal cutting temperature in machining Inconel 718. Materials and Manufacturing Processes 2012, 170, 1084–1089.
   Web of Science ®Google Scholar
• Bouzakis, K.-D.; Michailidis, N.; Skordaris, G.; Bouzakis, E.; Biermann, D.; Saoubi, R.M. Cutting with coated tools, Coating technologies, characterization methods and performance optimization. CIRP Annals-Manufacturing Technology. Tec 2012, 61, 703–723.
   Web of Science ®Google Scholar
• Ospina, R.; Escobar, D.; Restrepo-parra, E.; Arango, P.J.; Jurado, J.F. Mechanical and tribological behavior of W/WCN bilayers grown by pulsed vacuum arc discharge. Tribology International 2013, 62, 124–129.
   Web of Science ®Google Scholar
• Shalaby, M.A.; Elhakim,Magdy, M.A.; Abdel Hameed, M.B.; Kiranowski, J.E.; Veldhis, S.C.; Dosbaeva, G.K. Wear mechanism of several cutting tool materials in hard turning of high carbon chromium tool steel. Tribology International 2014, 70, 148–154.
   Web of Science ®Google Scholar
• Vereschaka, A.; Volosova, M.; Grigoriev, S.; Vereschaka, A. Development of wear-resistant complex for High speed steel tool when using process of combined cathodic vacuum arc deposition. Procedia CIRP 2013, 9, 8–12.
   Google Scholar
• Povstugar, I.; Choi, P.-P.; Tytko, D.; Ahn, J.-P.; Raabe, D. Interface-directed spinoidal decomposition in TiAlN/CrN multilayer hard coatings studied by atom probe tomography. Acta Materialia 2013, 61, 7534–7542.
   Web of Science ®Google Scholar
• Lamri, S.; Langlade, C.; Kermouche, G. Damage phenomena of thin hard coatings submitted to repeated impacts:Influence of the substrate and film properties. Materials science and Engineering A 2013, 560, 296–305.
   Web of Science ®Google Scholar
• Haubner, R. The history of hard CVD coatings for tool Applications at the university of Technology Vienna. International Journal of Refractory Metals and Hard Materials 2013, 41, 22–34.
   Web of Science ®Google Scholar
• Schmidtova, T.; Soucek, P.; Kudrle, V.; Vasina, P. Non-monotonous evolution of hybrid PVD-PECVDNprocess characteristics on hydrocarbon supply. Surface and Coating Technology 2013, 232, 283–289.
   Web of Science ®Google Scholar
• Yasuoka, M.; Wang, P.; Murakami, R.-I. Comparison of the mechanical performance of cutting tools coated by either a TiCxN1-x single-layer or a TiC/TiC0.5N0.5/TiN multilayer using the hollow cathode discharge ion plating method. Surface and Coating Technology 2012, 206, 2168–2172.
   Web of Science ®Google Scholar
• Lamri, S.; Langlade, C.; Kermouche, G. Damage phenomena of thin hard coatings submitted to repeated impacts: Influence of the substrate and film properties. Materials Science and Engineering A 2013, 560, 296–305.
   Web of Science ®Google Scholar
• Zavaleyeva, V.; Walkowicz, J.; Greczynski, G.; Hultman, L. Effect of substrate temperature on properties of diamond-like films deposited by combined DC impulse vacuum-arc method. Surface and Coatings Technology 2013, 236, 444–449.
   Web of Science ®Google Scholar
• Choe, H.J.; Kwon, S.-H.; Lee, J.-J. Tribological properties and thermal stability of TiAlCN coating deposited by ICP-assisted sputtering. Surface and Coatings Technology 2013, 228, 282–285.
   Web of Science ®Google Scholar
• Singh, K.; Krishnamurthy, N.; Suri, A.K. Adhesion and wear studies of magnetron sputtered NbN films. Tribology International 2012, 50, 16–25.
   Web of Science ®Google Scholar
• Kim, C.-S.; Ahn, S.-H.; Jang, D.-Y. Review: Developments in micro/nanoscale fabrication by focused ion beams. Vacuum 2012, 86, 1014–1035.
   Web of Science ®Google Scholar
• Ojolo, S.J.; Ogunkomaiya, O. A study of effects of machining parameters on tool life. International Journal of Materials Science and Applications 2014, 3, 183–199.
   Google Scholar
• Nagarajan, A.; Sangeetha, T.S. Analysis of coated single point cutting tool. International Journal of Engineering Technologies in Engineering Research 2015, 2, 5–9.
   Google Scholar
• HMT. Production Technology, Tata Mcgraw- Hill, 1998.
   Google Scholar
• Zheng, Z.; Zhao, S.; Dong, S.; Li, L.; Xiao, A.; Li, S. Preparation of nickel-copper bilayers coated on single-walled carbon nanotubes. Journal of Nanomaterials 2015, 2015, Article ID 679049, 8 pages.
   Web of Science ®Google Scholar