REFERENCES
- Jhavar, S.; Jain, N.K.; Paul, C.P. Enhancement of deposition quality in micro-plasma transferred arc deposition process. Materials and Manufacturing Processes 2014, 29(8), 1017–1023.
- Mendez, P.F.; Barnes, N.; Bell, K.; Borle, S.D.; Gajapathi, S.S.; Guest, S.D.; Izadi, H.; Gol, A.K.; Wood, G. Welding processes for wear resistant overlays. Journal of Manufacturing Processes 2014, 16(1), 4–25.
- Robert Jayachandran, J.A.; Murugan, N. Investigations on the influence of surfacing process parameters over bead properties during stainless steel cladding. Materials and Manufacturing Processes 2012, 27(1), 69–77.
- Tosun, G. Coating of AISI 1010 steel by Ni-WC using plasma transferred arc process. Arabian Journal for Science and Engineering 2014, 39(4), 3271–3277.
- Klimpel, A.; Janicki, D.; Lisiecki, A.; Wilk, Z.; Burda, M.; St. Klimpel, A. Plasma welding repair procedure for turbine jet apparatus rings in aircraft engines. Welding International 2014, 28(6), 495–500.
- Deng, D.; Zhang, L.; Niu, T.; Liu, H.; Zhang, H. Microstructures and wear performance of PTAW deposited Ni-based coatings with spherical tungsten carbide. Metals 2015, 5(4), 1984–1996.
- Bohatch, R.; Athayde, J.; Siqueira, J.; D’Oliveira, A.; Scheid, A. Influence of processing on the microstructure and properties of CoCrMoSi alloy PTA coatings. Soldagem & Inspeção 2015, 20(2), 219–227.
- Bradstreet, B.J. Effect of surface tension and metal flow on weld bead formation. Welding Journal 1968, 47(7), 314s–322s.
- Kumar, A.; DebRoy, T. Toward a unified model to prevent humping defects in gas tungsten arc welding. Welding Journal 2006, 85(12), 292s–304s.
- Nguyen, T.; Weckman, D.; Johnson, D. The discontinuous weld bead defect in high-speed gas metal arc welds. Welding Journal 2007, 86(11), 360s–372s.
- Nguyen, T.C.; Weckman, D.C.; Johnson, D.A.; Kerr, H.W. The humping phenomenon during high speed gas metal arc welding. Science and Technology of Welding and Joining 2005, 10(4), 447–459.
- Nguyen, T.C.; Weckman, D.C.; Johnson, D.A.; Kerr, H.W. High speed fusion weld bead defects. Science and Technology of Welding and Joining 2006, 11(6), 618–633.
- Yamauchi, N.; Taka, T. TIG arc welding with hollow tungsten electrodes. International Institute of Welding 1979, IIW-Document 212-452-79. 212–452.
- Mendez, P.F.; Eagar, T.W. Penetration and defect formation in high-current arc welding. Welding Journal 2003, 82(10), 296s–306s.
- Savage, W.; Nippes, E.; Agusa, K. Effect of arc force on defect formation in GTA welding. Welding Journal 1979, 58(7), 212s–224s.
- Bhargava, P.; Paul, C.; Premsingh, C.; Mishra, S.; Kumar, A.; Nagpure, D.; Singh, G.; Kukreja, L. Tandem rapid manufacturing of Inconel-625 using laser assisted and plasma transferred arc depositions. Advances in Manufacturing 2013, 1(4), 305–313.
- Jendrzejewski, R.; Conde, A.; Damborenea, J.D.; Sliwinski, G. Characterisation of the laser-clad stellite layers for protective coatings. Materials & Design 2002, 23(1), 83–88.
- Wu, D.; Wang, X.; Zhang, P.; Cai, L.; Sun, H. Defects in the in situ synthesized TiB2/Fe composite coatings during PTA process. Applied Surface Science 2011, 257(23), 10119–10125.
- Mandal, S.; Kumar, S.; Bhargava, P.; Premsingh, C.H.; Paul, C.P.; Kukreja, L.M. An experimental investigation and analysis of PTAW process. Materials and Manufacturing Processes 2015, 30(9), 1131–1137.
- Messler, R.W. Principles of Welding Processes, Physics, Chemistry and Metallurgy; WILEY-VCH, 2004.