Effect of FSW parameters on microstructure and mechanical properties of AM20 welds

References

• Shao, Z.C.; Zhang, Q.F.; Yang, L.; Wang, M.; Gao, H. Preparation of dark-red membrane by micro-arc oxidation on AM50 alloys. Materials and Manufacturing Processes 2015, 30 (12), 1505–1509.
   Web of Science ®Google Scholar
• Rajakumar, S.; Razal Rose, A.; Balasubramanian, V. Friction stir welding of AZ61A magnesium alloy, a parametric study. International Journal of Advanced Manufacturing Technology 2013, 68 (1), 277–292.
   Web of Science ®Google Scholar
• Kulekci, M.K. Magnesium and its alloys applications in automotive industry. International Journal of Advanced Manufacturing Technology 2008, 39 (9), 851–865.
   Web of Science ®Google Scholar
• Zeng, R.C.; Chen, J.; Dietzel, W.; Zettler, R.; Santos, J.F.D.; Nascimento, M.L.; Kainer, K.U. Corrosion of friction stir welded magnesium alloy AM50. Corrosion Science 2009, 51 (8), 1738–1746.
   Web of Science ®Google Scholar
• Asadi, P.; Besharati Givi, M.K.; Faraji, G. Producing Ultrafine-Grained AZ91 from as-cast AZ91 by FSP. Materials and Manufacturing Processes 2010, 25 (11), 1219–1226.
   Web of Science ®Google Scholar
• Dhanapal, A.; Boopathy, S.R.; Balasubramanian, V. Corrosion behaviour of friction stir welded AZ61A Mg alloy welds immersed in NaCl solutions. Transactions of Nonferrous Metals Society of China 2012, 22 (4), 793–802.
   Web of Science ®Google Scholar
• Sahu, P.K.; Pal, S.; Pal, S.K.; Jain, R. Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints. Journal of Materials Processing Technology 2016, 235, 55–67.
   Web of Science ®Google Scholar
• Mehta, K.P.; Badheka, V.J. Effects of tilt angle on the properties of dissimilar friction stir welding copper to aluminium. Materials and Manufacturing Processes 2016, 31 (3), 255–263.
   Web of Science ®Google Scholar
• Deepandurai, K.; Parameshwaran, R. Multi response optimization of FSW parameters for cast AA7075/SiCp composite. Materials and Manufacturing Processes 2016, 31 (10), 1333–1341.
   Web of Science ®Google Scholar
• Mehta, K.P.; Badheka, V.J. A Review on dissimilar friction stir welding of copper to aluminium: process, properties, and variants. Materials and Manufacturing Processes 2016, 31 (3), 233–254.
   Web of Science ®Google Scholar
• Sahu, P.K.; Kumari, K.; Pal, S.; Pal, S.K. Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints. Advances in Manufacturing 2016, 4 (3), 237–247.
   Web of Science ®Google Scholar
• Patel, V.V.; Badheka, V.; Kumar, A. Influence of Friction stir processed parameters on superplasticity of Al-Zn-Mg-Cu Alloy. Materials and Manufacturing Processes 2016, 31 (12), 1573–1582.
   Web of Science ®Google Scholar
• Dragatogiannis, D.A.; Koumoulos, E.P.; Kartsonakis, I.A.; Pantelis, D.I.; Karakizis, P.N.; Charitidis, C.A. Dissimilar friction stir welding between 5083 and 6082 Al alloys reinforced with TiC nanoparticles. Materials and Manufacturing Processes 2016, 31 (16), 2101–2114.
   Web of Science ®Google Scholar
• Pantelis, D.I.; Karakizis, P.N.; Daniolos, N.M.; Charitidis, C.A.; Koumoulos, E.P.; Dragatogiannis, D.A. Microstructural study and mechanical properties of dissimilar friction stir welded AA5083-H111 and AA6082-T6 reinforced with SiC nanoparticles. Materials and Manufacturing Processes 2016, 31 (3), 264–274.
   Web of Science ®Google Scholar
• Panaskar, N.J.; Sharma, A. Surface modification and nanocomposites layering of fastener-hole through friction stir processing. Materials and Manufacturing Processes 2014, 29 (6), 726–732.
   Web of Science ®Google Scholar
• Pieta, G.; dos Santos, J.; Strohaecker, T.R.; Clarke, T. Optimization of friction spot welding process parameters for AA2198-T8 sheets. Materials and Manufacturing Processes 2014, 29 (8), 934–940.
   Web of Science ®Google Scholar
• Das, B.; Bag, S.; Pal, S. Defect detection in friction stir welding process through characterization of signals by fractal dimension. Manufacturing Letters 2016, 7, 6–10.
   Google Scholar
• Abbasi, M.; Abdollahzadeh, A.; Bagheri, B.; Omidvar, H. The effect of SiC particle addition during FSW on microstructure and mechanical properties of AZ31 magnesium alloy. Journal of Materials Engineering and Performance 2015, 24 (12), 5037–5045.
   Web of Science ®Google Scholar
• Pramanik, A.; Littlefair, G.; Basak, A.K. Weldability of duplex stainless steel. Materials and Manufacturing Processes 2015, 30 (9), 1053–1068.
   Web of Science ®Google Scholar
• Mazzaferro, C.C.P.; Rosendo, T.S.; Tier, M.A.D.; Mazzaferro, J.A.E.; Dos Santos, J.F.; Strohaecker, T.R. Microstructural and mechanical observations of galvanized TRIP steel after friction stir spot welding. Materials and Manufacturing Processes 2015, 30 (9), 1090–1103.
   Web of Science ®Google Scholar
• Chandima Ratnayake, R.M.; Brevik, V.A. Experimental Investigation of Underwater Stud Friction Stir Welding Parameters. Materials and Manufacturing Processes 2014, 29 (10), 1219–1225.
   Web of Science ®Google Scholar
• Langlade, C.; Roman, A.; Schlegel, D.; Gete, E.; Folea, M. Formation of a Tribologically Transformed Surface (TTS) on AISI 1045 Steel by Friction Stir Processing. Materials and Manufacturing Processes 2016, 31 (12), 1565–1572.
   Web of Science ®Google Scholar
• Sharma, V.; Gupta, Y.; Kumar, B.V.M.; Prakash, U. Friction stir processing strategies for uniform distribution of reinforcement in a surface composite. Materials and Manufacturing Processes 2016, 31 (10), 1384–1392.
   Web of Science ®Google Scholar
• Yang, J.; Wang, D.; Xiao, B.L.; Ni, D.R.; Ma, Z.Y. Effects of rotation rates on microstructure, mechanical properties, and fracture behavior of friction stir welded AZ31 magnesium alloy. Metallurgical and Materials Transactions A 2012, 44 (1), 517–530.
   Google Scholar
• Commin, L.; Dumont, M.; Masse, J.E.; Barrallier, L. Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters. Acta Materialia 2009, 57 (2), 326–334.
   Web of Science ®Google Scholar
• Razal Rose, A.; Manisekar, K.; Balasubramanian, V. Influences of welding speed on tensile properties of friction stir welded AZ61A magnesium alloy. Journal of Materials Engineering and Performance 2012, 21 (2), 257–265.
   Web of Science ®Google Scholar
• Padmanaban, G.; Balasubramanian, V. Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy - An experimental approach. Materials and Design 2009, 30 (7), 2647–2656.
   Web of Science ®Google Scholar
• Montazerolghaem, H.; Badrossamay, M.; Tehrani, A.F.; Rad, S.Z.; Esfahani, M.S. Dual rotation speed friction stir welding: experimentation and modeling. Materials and Manufacturing Processes 2015, 30 (9), 1109–1114.
   Web of Science ®Google Scholar
• Selvaraj, M.; Murali, V.; Koteswara Rao, S.R. Mechanism of weld formation during friction stir welding of aluminium alloy. Materials and Manufacturing Processes 2013, 28 (5), 595–600.
   Web of Science ®Google Scholar
• Ganesh, P.; Senthil Kumar, V.S. Superplastic forming of friction stir welded AA6061-T6 alloy sheet with various tool rotation speed. Materials and Manufacturing Processes 2015, 30 (9), 1080–1089.
   Web of Science ®Google Scholar
• Simoncini, M.; Forcellese, A. Effect of the welding parameters and tool configuration on micro- and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets. Materials and Design 2012, 41, 50–60.
   Web of Science ®Google Scholar
• Chen, Y.C.; Nakata, K. Effect of tool geometry on microstructure and mechanical properties of friction stir lap welded magnesium alloy and steel. Materials and Design 2009, 30 (9), 3913–3919.
   Web of Science ®Google Scholar
• Malarvizhi, S.; Balasubramanian, V. Influences of tool shoulder diameter to plate thickness ratio (D/T) on stir zone formation and tensile properties of friction stir welded dissimilar joints of AA6061 aluminum–AZ31B magnesium alloy. Materials and Design 2012, 40, 453–460.
   Web of Science ®Google Scholar
• Firouzdor, V.; Kou, S. Al-to-Mg friction stir welding: effect of material position, travel speed, and rotation speed. Metallurgical and Materials Transactions A 2010, 41 (11), 2914–2935.
   Web of Science ®Google Scholar
• Fu, B.; Qin, G.; Li, F.; Meng, X.; Zhang, J.; Wu, C. Friction stir welding process of dissimilar metals of 6061-T6 aluminum alloy to AZ31B magnesium alloy. Journal of Materials Processing Technology 2015, 218, 38–47.
   Web of Science ®Google Scholar
• Xu, R.Z.; Ni, D.R.; Yang, Q.; Liu, C.Z.; Ma, Z.Y. Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg–Al–Zn alloy joints. Materials and Design 2015, 69, 163–169.
   Web of Science ®Google Scholar
• Xu, R.Z.; Ni, D.R.; Yang, Q.; Liu, C.Z.; Ma, Z.Y. Pinless friction stir spot welding of Mg-3Al-2012;1Zn alloy with Zn Interlayer. Journal of Materials Science and Technology 2016, 32 (1), 76–88.
   Web of Science ®Google Scholar
• Chen, J.; Fujii, H.; Sun, Y.; Morisada, Y.; Kondoh, K.; Hashimoto, K. Effect of grain size on the microstructure and mechanical properties of friction stir welded non-combustive magnesium alloys. Materials Science and Engineering A 2012, 549, 176–184.
   Web of Science ®Google Scholar
• Sirong, Y.; Xianjun, C.; Zhiqiu, H.; Yaohui, L. Microstructure and mechanical properties of friction stir welding of AZ31B magnesium alloy added with cerium. Journal of Rare Earths 2010, 28 (2), 316–320.
   Web of Science ®Google Scholar
• Dobriyal, R.P.; Dhindawa, B.K.; Muthukumaran, S.; Mukherjee, S.K. Microstructure and properties of friction stir butt-welded AE42 magnesium alloy. Materials Science and Engineering A 2008, 477 (1), 243–249.
   Web of Science ®Google Scholar
• Yu, L.; Nakata, K.; Liao, J. Microstructural modification and mechanical property improvement in friction stir zone of thixo-molded AE42 Mg alloy. Journal of Alloys and Compounds 2009, 480 (2), 340–346.
   Web of Science ®Google Scholar
• Sahu, P.K.; Pal, S. Multi-response optimization of process parameters in friction stir welded AM20 magnesium alloy by Taguchi grey relational analysis. Journal of Magnesium and Alloys 2015, 3 (1), 36–46.
   Web of Science ®Google Scholar
• Rong-chang, Z.; Dietzel, W.; Zettler, R.; Jun, C.; Kainer, K.U. Microstructure evolution and tensile properties of friction-stir-welded AM50 magnesium alloy. Transactions of Nonferrous Metals Society of China 2008, 18 (1), 76–80.
   Google Scholar
• Padmanaban, G.; Balasubramanian, V.; Sarin Sundar, J.K. Influences of welding processes on microstructure, hardness and tensile properties of AZ31B magnesium alloy. Journal of Materials Engineering and Performance 2010, 19 (2), 155–165.
   Web of Science ®Google Scholar
• Nia, A.A.; Omidvar, H.; Nourbakhsh, S.H. Investigation of the effects of thread pitch and water cooling action on the mechanical strength and microstructure of friction stir processed AZ31. Materials and Design 2013, 52, 615–620.
   Web of Science ®Google Scholar
• Parida, B.; Vishwakarma, S.D.; Pal, S. Design and development of fixture and force measuring system for friction stir welding process using strain gauges. Journal of Mechanical Science and Technology 2015, 29 (2), 739–749.
   Web of Science ®Google Scholar
• Hall, E.O. Nature, 1954, 173, 948–949.
   Google Scholar
• ASTM International standard. E112–04, Standard Test Methods for Determining Average Grain Size, 2006.
   Google Scholar
• Rajakumar, S.; Balasubramanian, V. Predicting grain size and tensile strength of friction stir welded joints of AA7075-T6 aluminium alloy. Materials and Manufacturing Processes 2012, 27 (1), 78–83.
   Web of Science ®Google Scholar
• ASM Handbook. Metallography and Microstructures 2004, 9, 890–916.
   Google Scholar