WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters

References

• Soorya Prakash, K.; Sathiya Moorthy, R.; Gopal, P.M.; Kavimani, V. Effect of reinforcement, compact pressure and hard ceramic coating on aluminium rock dust composite performance. International Journal of Refractory Metals and Hard Materials 2016, 54, 223–229.
   Web of Science ®Google Scholar
• Kalpakjian, S.; Steven, S.R. Manufacturing Engineering and Technology; Pearson Education: India, 2010; 228 pp.
   Google Scholar
• Hung, N.P.; Yang, L.J.; Leong, K.W. Electrical discharge machining of cast metal matrix composites. Journal of Material Processing Technology 1994, 44, 229–236.
   Web of Science ®Google Scholar
• Benedict, G.F. Electric Discharge Machining (EDM)-Nontraditional Manufacturing Processes; Marcel Dekker: New York, Basel, 1987; 231pp.
   Google Scholar
• Boothroyd, G.; Winston, A.K. Non-Conventional Machining Processes–Fundamentals of Machining; Marcel Dekker: New York, Basel, 1989; 491pp.
   Google Scholar
• Sanjeev Kumar, Garg; Alakesh, Manna; Ajai, Jain. Experimental investigation of spark gap and material removal rate of Al/ZrO2(P)-MMC machined with wire EDM. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2015, 38 (2), 481–491.
   Web of Science ®Google Scholar
• Garg, R.K.; Singh, K.K.; Anish, Sachdeva; Ishal, S.Sharma; Kuldeep, Ojha; Sharanjit, Singh. Review of research work in sinking EDM and WEDM on metal matrix composite materials. International Journal of Advanced Manufacturing Technology 2010, 50 (5), 611–624.
   Web of Science ®Google Scholar
• Yue, T.M.; Dai, Y.; Lau, W.S. An examination of wire electrical discharge machining (WEDM) of Al2O3 particulate reinforced aluminum based composites. Materials and Manufacturing Processes 1996, 11 (3), 341–350.
   Web of Science ®Google Scholar
• Rozenek, M.; Kozak, J.; Daibrowski, L.; Eubkowski, K. Electrical discharge machining characteristics of metal matrix composites. Journal of Materials Processing Technology 2001, 109 (3), 367–370.
   Web of Science ®Google Scholar
• Patil, Nilesh Ganpatrao; Brahmankar, P.K. Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis. International Journal of Advanced Manufacturing Technology 2010, 51 (5), 599–610.
   Web of Science ®Google Scholar
• Reza Kashiry, Fard.; Reza Azar, Afza.; Reza, Teimouri. Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite. Journal of Manufacturing Processes 2013, 15 (4), 483–494.
   Web of Science ®Google Scholar
• Patil, N.G.; Brahmankar, P.K. Some investigations into wire electro-discharge machining performance of Al/SiCp composites. International Journal of Machining and Machinability of Materials 2006, 1 (4), 412–431.
   Google Scholar
• Anand Babu, K.; Venkataramaiah, P. Multi-response optimization in wire electrical discharge machining (WEDM) of Al6061/SiCp composite using hybrid approach. Journal for Manufacturing Science and Production 2015, 15 (4), 327–338.
   Web of Science ®Google Scholar
• Singh, Preetkanwal; Sidhu, Sarabjeet Singh; Payal, H.S. Fabrication and machining of metal matrix composites: A review. Materials and Manufacturing Processes 2016, 31 (5), 553–573.
   Web of Science ®Google Scholar
• Bernardo, E.; Scarinci, G.; Hreglich, S. Mechanical properties of metal-particulate lead-silicate glass matrix composites obtained by means of powder technology. Journal of the European Ceramic Society 2003, 23 (11), 1819–1827.
   Web of Science ®Google Scholar
• Yan, Biing Hwa; Tsai, Hsien Chung; Huang, Fuang Yuan; Lee, Long Chorng. Examination of wire electrical discharge machining of Al2O3p/6061Al composites. International Journal of Machine Tools & Manufacture 2005, 45 (3), 251–259.
   Web of Science ®Google Scholar
• Pramanik, A.; Basak, A.K. Effect of reinforced particle size on wire EDM of MMCs. International Journal of Machining and Machinability of Materials 2015, 17 (2), 139–149.
   Google Scholar
• Suresh Kumar, S.; Uthayakumar, M.; Thirumalai Kumaran, S.; Parameswaran, P.; Mohandas, E.; Kempulraj, G.; Ramesh Babu, B.S.; Natarajan, S.A. Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis. Journal of Manufacturing Processes 2015, 20 (1), 33–39.
   Google Scholar
• Pramanik, A. Electrical discharge machining of MMCs reinforced with very small particles. Materials and Manufacturing Processes 2016, 31 (4), 397–404.
   Web of Science ®Google Scholar
• Satishkumar, D.; Kanthababu, M.; Vajjiravelu, V.; Anburaj, R.; Thirumalai Sundarrajan, N.; Arul, H. Investigation of wire electrical discharge machining characteristics of Al6063/SiCp composites. International Journal of Advanced Manufacturing Technology 2011, 56 (9), 975–986.
   Web of Science ®Google Scholar
• Pramanik, A.; Littlefair, G. Wire EDM mechanism of MMCs with the variation of reinforced particle size. Materials and Manufacturing Processes 2016, 31 (13), 1700–1708.
   Web of Science ®Google Scholar
• Somashekhar, Kodalagara Puttanarasaiah; Ramachandran, Nottath; Mathew, Jose. Material removal characteristics of micro slot (kerf) geometry in μ-WEDM on aluminum. International Journal of Advanced Manufacturing Technology 2010, 51 (5), 611–626.
   Web of Science ®Google Scholar
• Kataria, Ravinder; Kumar, Jatinder; Pabla, B.S. Experimental investigation and optimization of machining characteristics in ultrasonic machining of WC-Co composite using GRA method. Materials and Manufacturing Processes 2016, 31 (5), 685–693.
   Web of Science ®Google Scholar