Influence of reinforcement and processing on steel-based composites: Microstructure and mechanical response

References

• Karimzadeh, A.; Sabour Rouhaghdam, A. Effect of Nickel Pre-plated on Microstructure and Oxidation Behavior of Aluminized AISI 316 Stainless Steel. Mater. Manuf. Processes 2016, 31, 87–94. DOI:10.1080/10426914.2015.1019091
   Web of Science ®Google Scholar
• Ushashri, K.; Masanta, M. Hard TiC Coating on AISI304 Steel by Laser Surface Engineering Using Pulsed Nd:YAG Laser. Mater. Manuf. Processes 2015, 30, 730–735. DOI:10.1080/10426914.2014.973593
   Web of Science ®Google Scholar
• Krishna, D. S. R.; Sun, Y. Effect of Thermal Oxidation Conditions on Tribological Behaviour of Titanium Films on 316L Stainless Steel. Surf. Coat. Technol. 2005, 198, 447–453. DOI:10.1016/j.sufcoat.2004.10.102
   Web of Science ®Google Scholar
• Fernandez, A.; Springer, H.; Szczepaniak, A.; Zhang, H.; Raabe, D. In-situ Metal Matrix Composite Steels: Effect of Alloying and Annealing on Morphology, Structure and Mechanical Properties of TiB2 Particle Containing High Modulus Steels. Acta Mater. 2016, 107, 38–48. DOI:10.1016/j.actamat.2016.01.048
   Web of Science ®Google Scholar
• Sulima, I.; Boczkal, S.; Jaworska, L. SEM and TEM Characterization of Microstructure of Stainless Steel Composites Reinforced with TiB2. Mater. Charact. 2016, 118, 560–569. DOI:10.1016/j.matchar.2016.07.005
   Web of Science ®Google Scholar
• Bains, P. S.; Sidhu, S. S.; Payal, H. S. Fabrication and Machining of Metal Matrix Composites: A Review. Mater. Manuf. Processes 2016, 31, 553–573. DOI:10.1080/10426914.2015.1025976
   Web of Science ®Google Scholar
• Gao, Q.; Yang, B.; Mei, H.; Wu, H. Microstructure and Wear Resistance of Semisolid TiB2/7050 Composites Produced by Serpentine Tube Pouring Technique. Mater. Manuf. Processes 2016, 31, 1029–1036. DOI:10.1080/10426914.2015.1037917
   Web of Science ®Google Scholar
• Ahasan, M. D.; Davidson, M. J. Modeling Aspects of Hot Densification and Deformation Studies on Al–TiB2 Composite Preforms. Mater. Manuf. Processes 2015, 30, 1190–1195. DOI:10.1080/10426914.2015.1019099
   Web of Science ®Google Scholar
• Sulima, I. Effect of Titanium Diboride Addition on Microstructure and Properties of the 316l Stainless Steel. 23rd International Conference on Metallurgy and Materials, Brno, Czech Republic, EU, May 21–23, 2014.
   Google Scholar
• Biedunkiewicz, A.; Biedunkiewicz, W.; Figiel, P.; Gabriel-Polrolniczak, U.; Grzesiak, D.; Krawczyk, M. Effect of Milling Time on Thermal Treatment of TiC, TiB2/Steel Powders. J. Therm. Anal. Calorim. 2013, 113(1), 379–383. DOI:10.1007/s10973-013-3251-8
   Web of Science ®Google Scholar
• Wang, X. H.; Zhang, M.; Du, B. S. Fabrication of Multiple Ceramic Particle Reinforced Iron Matrix Coating by Laser Cladding. Mater. Manuf. Processes 2013, 28, 509–513. DOI:10.1080/10426914.2012.70015
   Web of Science ®Google Scholar
• Khoa, H. X.; Tuan, N. Q.; Lee, Y. H.; Lee, B. H.; Viet, N. H.; Kim, J. Fabrication of Fe-Titanium diboride Composite Powder by High-Energy Milling and Subsequent Reaction Synthesis. J. Korean Powder Metall. Inst. 2013, 20(3), 221–227. DOI:10.4150/KPMI.2013.20.3.22
   Google Scholar
• Akhtar, F. Microstructure Evolution and Wear Properties of In Situ Synthesized Titanium Diboride and TiC Reinforced Steel Matrix Composites. J. Alloys Compd. 2008, 459, 491–497. DOI:10.1016/j.jallcom.2007.05.018
   Web of Science ®Google Scholar
• Sabahi Namini, A.; Azadbeh, M. Microstructural Characterisation and Mechanical Properties of Spark Plasma-Sintered TiB2-Reinforced Titanium Matrix Composite. Powder Metall. 2017, 60(1), 22–32. DOI:10.1080/00325899.2016.1265805
   Web of Science ®Google Scholar
• Sulima, I.; Klimczyk, P.; Hyjek, P. The Influence of the Sintering Conditions on the Properties of the Stainless Steel Reinforced with Titanium Diboride Ceramics. J. Achiev. Mater. Manuf. Eng. 2009, 39(2), 103–108.
   Google Scholar
• Fedrizzi, A.; Pellizzari, M.; Zadrab, M.; Marin, E. Microstructural Study and Densification Analysis of Hot Work Tool Steel Matrix Composites Reinforced with Titanium Diboride Particles. Mater. Charact. 2013, 86, 69–79. DOI:10.1016/J.MATCHAR.2013.09.012
   Web of Science ®Google Scholar
• Wang, Y.; Zhang, Z. Q.; Wang, H. Y.; Ma, B. X.; Jiang, Q. C. Effect of Fe Content in Fe–Ti–B System on Fabricating Titanium Diboride Particulate Locally Reinforced Steel Matrix Composites. Mater. Sci. Eng. A 2006, 422, 339–345. DOI:10.1016/j.msea.2006.02.012
   Web of Science ®Google Scholar
• Yang, Y. F.; Wang, H. Y.; Zhao, R. Y.; Liang, Y. H.; Jiang, Q. C. In Situ TiC/Titanium diboride Particulate Locally Reinforced Steel Matrix Composites Fabricated Via the SHS Reaction of Ni–Ti–B4C System. Int. J. Appl. Ceram. Technol. 2009, 6(3), 437–446. DOI:10.1111/j.1744-7402.2008.02282.x
   Web of Science ®Google Scholar
• Zhang, Z.; Shen, P.; Wang, Y.; Dong, Y.; Jiang, Q. Fabrication of TiC and Titanium Diboride Locally Reinforced Steel Matrix Composites Using a Fe–Ti–B4C–C System by an SHS-Casting Route. J. Mater. Sci. 2007, 42, 8350–8356. DOI:10.1007/s10853-006-0764-6
   Web of Science ®Google Scholar
• Pagounis, E.; Lindroos, V. K. Processing and Properties of Particulate Reinforced Steel Matrix Composites. Mater. Sci. Eng. A 1998, 246, 221–234. DOI:10.1016/S0921-5093(97)00710-7
   Web of Science ®Google Scholar
• He, S.; Fan, X.; Chang, Q.; Xiao, L. TiC-Fe-Based Composite Coating Prepared by Self-Propagating High-Temperature Synthesis. Metall. Mater. Trans. B 2017, 48(3), 1748–1753. DOI:10.1007/s11663-017-0942-8.
   Web of Science ®Google Scholar
• Anal, A.; Bandyopadhyay, T. K.; Das, K. Synthesis and Characterization of Titanium Diboride-Reinforced Iron-Based Composites. J. Mater. Process. Technol. 2006, 172(1), 70–76. DOI:10.1016/j.jmatprotec.2005.09.011
   Web of Science ®Google Scholar
• Bains, P. S.; Sidhu, S. S.; Payal, H. S. Fabrication and Machining of Metal Matrix Composites: A Review. Mater. Manuf. Processes 2016, 31, 553–573. DOI:10.1080/10426914.2015.1025976
   Web of Science ®Google Scholar
• Tjong, S. C.; Lau, K. C. Sliding Wear of Stainless Steel Matrix Composite Reinforced with Titanium Diboride Particles. Materials Letters 1999, 41, 153–158. DOI:10.1016/S0167-577X(99)00123-8
   Web of Science ®Google Scholar
• Tjong, S. C.; Lau, K. C. Abrasion Resistance of Stainless-Steel Composites Reinforced with Hard Titanium Diboride Particles. Compos. Sci. Technol. 2000, 60, 1141–1146. DOI:10.1016/S0266.3538(00)00008-7
   Web of Science ®Google Scholar
• Nahme, H.; Lach, E.; Tarran, A. Mechanical Property Under High Dynamic Loading and Microstructure Evaluation of Titanium Diboride Particle Reinforced Stainless Steel. J. Mater. Sci. 2009, 44, 463–468. DOI:10.1007/s10853-008-3091-2
   Web of Science ®Google Scholar
• Sulima, I.; Jaworska, L.; Wyżga, P.; Perek-Nowak, M. The Influence of Reinforcing Particles on Mechanical and Tribological Properties and Microstructure of the Steel-Titanium Diboride Composites. J. Achiev. Mater. Manuf. Eng. 2011, 48(1), 52–57.
   Google Scholar
• Bacon, D. H.; Edwards, L.; Moffatt, J. E.; Fitzpatrick, M. E. Fatigue and Fracture of a 316 Stainless Steel Metal Matrix Composite Reinforced with 25% Titanium Diboride. Int. J. Fatigue 2012, 48, 39–47. DOI:10.1016/j.ijfatigue.2012.09.016
   Web of Science ®Google Scholar
• He, P.; Yue, X.; Zhang, J. Hot Pressing Diffusion Bonding of a Titanium Alloy to a Stainless Steel with an Aluminium Alloy Interlayer. Mater. Sci. Eng. A 2008, 486, 171–176. DOI:10.1016/j.msea.2007.08.076
   Web of Science ®Google Scholar
• Oliver, W. C.; Pharr, G. M. An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments. J. Mater. Res. 1992, 7, 1564–1583. DOI:10.1557/JMR.1992.1564
   Web of Science ®Google Scholar
• Shahedi, M.; Ghassemi Kakroudi, M. A Processing–Microstructure Correlation in ZrB2–SiC Composites Hot-Pressed Under a Load of 10 MPa. Univers. J. Mater. Sci. 2015, 3(1), 14–21. DOI:10.13189/ujms.2015.030103
   Google Scholar
• Guyot, P.; Antou, G.; Pradeilles, N.; Weibel, A.; Vandenhende, M.; Chevallier, G.; Peigney, A.; Estourne, C.; Maıtre, A. Hot Pressing and Spark Plasma Sintering of Alumina: Discussion About an Analytical Modelling Used for Sintering Mechanism Determination. Scr. Mater. 2014, 84–85, 35–38. DOI:10.1016/j.scriptamat.2014.04.013
   Web of Science ®Google Scholar
• Kim, J. M.; Park, J. S.; Yun, H. S. Microstructure and Mechanical Properties of Tic Nanoparticle-Reinforced Iron-Matrix Composites. Strength Mater. 2014, 46(2), 177–182. DOI:10.1007/s11223-014-9633-y
   Web of Science ®Google Scholar
• Çalik, A.; Karakaþ, S.; Uçar, N.; Akkurt, Y.; Turhan, A. Study on the Mechanical and Radiation-Shielding Properties of Borided AISI 304 Stainless Steels. Mater. Technol. 2013, 47(5), 679–681.
   Google Scholar
• Sulima, I.; Jaworska, L.; Figiel, P. Influence of Processing Parameters and Different Content of Titanium Diboride Ceramics on the Properties of Composites Sintered by High Pressure - High Temperature (HP-HT) Method. Archiv. of Metall. Mater. 2014, 59(1), 205–209. DOI:10.2478/amm-2014-0033
   Web of Science ®Google Scholar
• Sulima, I.; Hyjek, P.; Tokarski, T. Influence of Annealing Conditions on the Properties and Microstructure of Steel Composites. Metall. Foundry Eng. 2014, 40(1), 33–43. DOI:10.7494/mafe.2014.40.1.33
   Google Scholar
• Degnan, C. C.; Shipway, P. H. Influence of Reinforcement Volume Fraction on Sliding Wear Behaviour of SHS Derived Ferrous Based Metal Matrix Composite. Mater. Sci. Technol. 2002, 18, 1156–1162. DOI:10.1179/026708302225007240
   Web of Science ®Google Scholar
• Yuan, Z.; Li, F.; Xue, F.; Zhang, M.; Li, J. An Investigation of Micro-Mechanical Properties of Al Matrix in SiC/Al Composite by Indentation Experiments. J. Mater. Eng. Perform. 2015, 24(2), 654–663. DOI:10.1007/s11665-014-1350-8
   Web of Science ®Google Scholar
• Pramanik, A.; Zhang, L. C.; Arsecularatne, J. A. Deformation Mechanisms of MMCs Under Indentation. Compos. Sci. Technol. 2008, 68, 1304–1312. DOI:10.1016/j.compscitech.2007.12.008
   Web of Science ®Google Scholar
• Lloyd, D. J. Particle Reinforced Aluminium and Magnesium Matrix Composites. Int. Mater. Rev. 1994, 39, 1–24. DOI:10.179/imr.1994.39.1.1
   Web of Science ®Google Scholar
• Kim, C. S.; Nezafati, M.; Ferguson, J. B.; Schultz, B. F.; Gohari, Z. B.; Rohatgi, P. K.; Cho, K. Prediction Models for the Yield Strength of Particle-Reinforced Unimodal Pure Magnesium (Mg) Metal Matrix Nanocomposites. J. Mater. Sci. 2013, 48, 4191–4204. DOI:10.1007/s10853-013-7232-x
   Web of Science ®Google Scholar