TiH₂-based Ti-1Al-8V-5Fe PM alloys with different addition methods of alloying elements

References

• Boyer, R. R.; Briggs, R. D. The Use of β Titanium Alloys in the Aerospace Industry. J. Mater. Eng. Perform. 2005, 14(6), 681–685.
   Web of Science ®Google Scholar
• Hua, K.; Li, J. S.; Kou, H. C.; Fan, J. K.; Sun, M.; Tang, B. Phase Precipitation Behavior During Isothermal Deformation in β-Quenched Near Beta Titanium Alloy Ti-7333. J. Alloys Compd. 2016, 671, 381–388.
   Web of Science ®Google Scholar
• Boyer, R.; Welsch, G.; Collings, E. W. Materials Properties Hand-book-Titanium Alloys; ASM International: Materials Park, OH, 1998; pp 105–130.
   Google Scholar
• Joshi, V. V.; Lavender, C.; Moxson, V. S.; Duz, V.; Nyberg, E.; Scott Well, K. Development of Ti-6Al-4V and Ti-1Al-8V- 5Fe Alloys Using Low-Cost TiH2 Powder Feedstock. J. Mater. Eng. Perform. 2013, 22, 995–1003.
   Web of Science ®Google Scholar
• Bolzoni, L.; Ruiz-Navas, E. M.; Gordo, E. Quantifying the Properties of Low-Cost Powder Metallurgy Titanium Alloys. Mater. Sci. Eng. A 2017, 687, 47–53.
   Web of Science ®Google Scholar
• Devaraj, A.; Joshi, V. V.; Srivastava, A.; Manandhar, S.; Moxson, V.; Duz, V. A.; Lavender, C. A Low-Cost Hierarchical Nanostructured Beta-Titanium Alloy with High Strength. Nat. Commun. 2016, 7, 111176.
   Web of Science ®Google Scholar
• Shekhar, S.; Sarkar, R.; Kar, S. K.; Bhattacharjee, A. Effect of Solution Treatment and Aging on Microstructure and Tensile Properties of High Strength β Titanium Alloy, Ti-5Al-5V-5Mo-3Cr. Mater. Des. 2015, 66, 596–610.
   Web of Science ®Google Scholar
• Yang, Y. F.; Luo, S. D.; Schaffer, G. B.; Qian, M. Sintering of Ti-10V-2Fe-3Al and Mechanical Properties. Mater. Sci. Eng. A 2011, 528, 6719–6726.
   Web of Science ®Google Scholar
• Bolzoni, L.; Ruiz-Navas, E. M.; Gordo, E. Understanding the Properties of Low-Cost Iron-Containing Powder Metallurgy Titanium Alloys. Mater. Des. 2016, 110, 317–323.
   Web of Science ®Google Scholar
• Balamurugan, P.; Uthayakumar, M. Influence of Process Parameters on Cu-Fly Ash Composite by Powder Metallurgy Technique. Mater. Manuf. Processes 2015, 30(3), 313–319.
   Web of Science ®Google Scholar
• Bolzoni, L.; Ruiznavas, E. M.; Gordo, E. Evaluation of the Mechanical Properties of Powder Metallurgy Ti-6Al-7Nb Alloy. J. Mech. Behav. Biomed. Mater. 2017, 67, 110–116.
   PubMed Web of Science ®Google Scholar
• Sharma, B.; Vajpai, S. K.; Ameyama, K. Microstructure and Properties of Beta Ti-Nb Alloy Prepared by Powder Metallurgy Route Using Titanium Hydride Powder. J. Alloys Compd. 2016, 656, 978–986.
   Web of Science ®Google Scholar
• Ivasishin, O. M.; Eylon, D.; Bondarchuk, V. I.; Savvakin, D. G. Diffusion During Powder Metallurgy Synthesis of Titanium Alloys. Defect Diffus. Forum 2008, 277, 177–185.
   Google Scholar
• Ivasishin, O. M.; Savvakin, D. G.; Bondareva, X. O.; Dekhtyar, O. I. Synthesis of PM Titanium Alloys Using Titanium Hydride Powder: Mechanism of Densification. Proceedings of 10th World Conference, 1. In Titanium (Hamburg, 2003), Wiley-VCH Verlag, Weinheim, 2004; pp 495–502.
   Google Scholar
• Wang, C. M.; Zhang, Y. N.; Xiao, S. F.; Chen, Y. G. Sintering Densification of Titanium Hydride Powders. Mater. Manuf. Processes 2017, 5(32), 517–522.
   Web of Science ®Google Scholar
• Ivasishin, O. M.; Savvakin, D. G.; Gumenyak, M. M.; Bondarchuk, O. B. Role of Surface Contamination in Titanium PM. Key Eng. Mater. 2012, 520, 121–132.
   Google Scholar
• Ivasishin, O. M.; Savvakin, D. G.; Matviychuk, M.; Melnyk, Y. Microstructure and Properties of High-Strength Titanium Alloys Produced with BEPM Approach. Proceedings of the 13th World Conference on Titanium, San Diego, CA, 2016; pp 1183–1187.
   Google Scholar
• Lee, D. W.; Lee, H. S.; Park, J. H.; Shin, S. M.; Wang, J. P. Sintering of Titanium Hydride Powder Compaction. Procedia Manuf. 2015, 2, 550–557.
   Google Scholar
• Li, H. M.; Lei, T.; Zhao, J. C.; Shang, Q. L.; Lin, Z. Production of Ti-13Nb-13Zr Alloy by Powder Metallurgy (P/M) via Sintering Hydrides. Mater. Manuf. Processes 2016, 31(6), 719–724.
   Web of Science ®Google Scholar
• Hosseini, S. A.; Yazdani-Rad, R.; Kazemzadeh, A.; Alizadeh, M. Influence of Thermal Hydrogen Treatment of Titanium Particles on Powder Metallurgical Processing of NiTi-SMA. Mater. Manuf. Processes 2013, 28(11), 1179–1183.
   Web of Science ®Google Scholar
• Esteban, P. G.; Bolzoni, L.; Ruiznavas, E. M.; Gordo, E. PM Processing and Characterisation of Ti-7Fe Low Cost Titanium Alloys. Powder Metall. 2011, 54(3), 242–252.
   Web of Science ®Google Scholar
• Shi, S. J.; Jin, Z. J.; Bao, Y.; Jiang, G. N. Study of Milling Time and Process Control Agent on W-Mo-Cr Pre-Alloying Powders. Mater. Manuf. Processes 2016, 31, 926–932.
   Web of Science ®Google Scholar
• Narayan, S.; Rajeshkannan, A. Workability Behavior of Powder Metallurgy Carbide Reinforced Aluminum Composites During Hot Forging. Mater. Manuf. Processes 2015, 30, 1196–1201.
   Web of Science ®Google Scholar
• Savvakin, D. G.; Carman, A.; Ivasishin, O. M.; Matviychuk, M. V.; Gazder, A. A.; Pereloma, E. V. Effect of Iron Content on Sintering Behavior of Ti-V-Fe-Al Near-β Titanium Alloy. Metall. Mater. Trans. A 2012, 43(2), 716–723.
   Web of Science ®Google Scholar
• Joshi, M. V. V.; Devaraj, A.; Lavender, M. C.; Thevuthasan, S. Microstructure-Property Relationship in Low Cost Powder Processed Ti1Al8V5Fe Alloy. Aeromat 24 Conference and Exposition American Society for Metals, Bellevue, Washington USA, April, 2013.
   Google Scholar
• Gao, S. Y.; Liu, P.; Wang C. M.; Xiao, S. F.; Chen, Y. G. Microstructure and Mechanical Properties of Low-Cost Ti-1Al-8V-5Fe Alloy using PM Method. Powder Metall. Technol. 2014, 32(6), 427–430.
   Google Scholar
• Zhang, Y. N.; Wang, C. M.; Zhang, Y. G.; Cheng, P.; Wei, Y. H.; Xiao, S. F.; Chen, Y. G. Fabrication of Low-Cost Ti-1Al-8V-5Fe by Powder Metallurgy with TiH2 and FeV80 Alloy. Mater. Manuf. Processes 2017, 12, 1–15. DOI:10.1080/10426914.2017.1303163.
   Google Scholar
• Böhm, A.; Kieback, B. Investigation of swelling Behaviour of Ti-Al Elemental Powder Mixtures During Reaction Sintering. Z. Metall. 1998, 89, 90–95.
   Google Scholar
• Wang, H. T.; Lefler, M.; Fang, Z. Z.; Lei, T.; Fang, S. M.; Zhang, J. M.; Zhao, Q. Titanium and Titanium Alloy via Sintering of TiH2. Key Eng. Mater. 2010, 436, 157–163.
   Google Scholar
• Wang, C. M.; Pan, L.; Zhang, Y. N.; Xiao, S. F.; Chen, Y. G. Deoxidization Mechanism of Hydrogen in TiH2 Dehydrogenation Process. Int. J. Hydrogen Energy 2016, 41(33), 14836–14841.
   Web of Science ®Google Scholar
• Wang, C. M.; Zhang, Y. G.; Wei, Y. H.; Mei, L. B.; Xiao, S. F.; Chen, Y. G. XPS Study of the Deoxidization Behavior of Hydrogen in TiH2 Powders. Powder Technol. 2016, 302, 423–425.
   Web of Science ®Google Scholar
• Sahoo, R.; Jha, B. B.; Sahoo, T. K.; Sahoo, D. Effect of Microstructural Variation on Dry Sliding Wear Behavior of Ti-6Al-4V Alloy. J. Mater. Eng. Perform. 2014, 23, 2092–2102.
   Web of Science ®Google Scholar
• Sahoo, R.; Mantry, S.; Sahoo, T. K.; Mishra, S.; Jha, B. B. Effect of Microstructural Variation on Erosion Wear Behavior of Ti-6Al-4V Alloy. Tribol. Trans. 2013, 56, 555–560.
   Web of Science ®Google Scholar
• Sahoo, R.; Jha, B. B.; Sahoo, T. K. Effect of Primary Alpha Phase Variation on Mechanical Behaviour of Ti-6Al-4V Alloy. Mater. Sci. Technol. 2015, 31(12), 1486–1494.
   Web of Science ®Google Scholar