Deposition efficiency of low pressure cold sprayed aluminum coating

References

• Champagne, V.; Dan, K.; Champagne, V. K.; Howe, C.; West, M. K.; Mcnally, B. Dissimilar metal Joining and Structural Repair of Ze41A-T5 Cast Magnesium by the Cold Spray (CS) Process. Mater. Manuf. Proc. 2016, 31, 1–10. DOI: 10.1080/10426914.2016.1257137.
   Google Scholar
• Klinkov, S. V.; Kosarev, V. F.; Zaikovskii, V. N. Preliminary Study of Cold Spraying Using Radial Supersonic Nozzle. Surf. Eng. 2016, 32(9), 701–706. DOI: 10.1179/1743294415y.0000000070.
   Web of Science ®Google Scholar
• Huang, C. J.; Li, W. Y. Strengthening Mechanism and Metal/Ceramic Bonding Interface of Cold Sprayed TiN/Al5356 Deposits. Surf. Eng. 2016, 32(9), 663–669. DOI: 10.1179/1743294415y.0000000089.
   Web of Science ®Google Scholar
• Papyrin, A.; Kosarev, V.; Klinkov, S.; Alkhimov, A.; Fomin, V. Cold Spray Technology, 1st ed.; Elsevier Science, Amsterdam USA, 2006; pp 41–42, 118–120.
   Google Scholar
• Yang, T.; Yu, M.; Chen, H.; Li W. Y.; Liao, H. L. Characterisation of Cold Sprayed Al5056/SiCp Coating: Effect of SiC Particle Size. Surf. Eng. 2016, 32(9), 641–649. DOI: 10.1179/1743294415y.0000000042.
   Web of Science ®Google Scholar
• Tarun, G.; Ravinderjit, S.; Sidhu, T. Study of Coating Thickness of Cold Spray Process using Taguchi Method. Mater. Manuf. Proc. 2012, 27(2), 185–192. DOI: 10.1080/10426914.2011.564249.
   Web of Science ®Google Scholar
• Singh, H.; Khosla, H.; Sidhu, T. S.; Kalsi, S. B. S.; Karthikeyan, J. Characteristic Study of N07718 Superalloy Surface Prepared by Cold Spray. Mater. Manuf. Proc. 2016, 31, 1–9, DOI:10.1080/10426914.2016.1269922.
   Google Scholar
• Champagne, V. K. The Repair of Magnesium Rotorcraft Components by Cold Spray. J. Failure Anal. Prevention 2008, 8(2), 164–175. DOI: 10.1007/s11668-008-9116-y.
   Google Scholar
• Villafuerte, J.; Wright, D. Practical Cold Spray Success: Repair of Al and Mg Alloy Aircraft Components. Mater. Proc. 2010, 168(5), 53–59.
   Google Scholar
• Dzhurinskiy, D.; Maeva, E.; Leshchinsky, E.; Maev, R. G. Corrosion Protection of Light Alloys Using Low Pressure Cold Spray. J. Therm. Spray Technol. 2012, 21(2), 304–313. DOI: 10.1007/s11666-011-9729-7.
   Web of Science ®Google Scholar
• Leyman, P. F.; Champagne, V. K. Cold Spray Process Development for the Reclamation of the Apache Helicopter Mast Support; Army Research Laboratory, Aberdeen Proving Ground: MD, Aberdeen Proving Ground, USA, 2009.
   Google Scholar
• Winnicki, M.; Baszczuk, A.; Rutkowskagorczyca, M.; Małachowska, A.; Ambroziak, A. Corrosion Resistance of tin Coatings Deposited by Cold Spraying. Surf. Eng. 2016, 32(9), 691–700. DOI: 10.1080/02670844.2016.1190064.
   Web of Science ®Google Scholar
• Klinkov, S. V.; Kosarev, V. F.; SovaI, A. A.; Smurov, I. Calculation of Particle Parameters for Cold Spraying of Metal-Ceramic Mixtures. J. Therm. Spray Technol. 2009, 18(9), 44–48. DOI: 10.1007/s11666-009-9346-x.
   Google Scholar
• Adebiyi, D. I.; Popoola, A. P.; Botef. I. Experimental Verification of Statistically Optimized Parameters for Low-Pressure Cold Spray Coating of Titanium. Metals 2016, 6(6), 135. DOI: 10.3390/met6060135.
   Web of Science ®Google Scholar
• Singh, H.; Sidhu, T.; Kalsi, S.; Karthikeyan, J. Evolution of Microstructure by High Velocity Impacts of Particles by Cold Spray. Mater. Manuf. Proc. 2014, 31(11), 1514–1520. DOI: 10.1080/10426914.2014.994766.
   Web of Science ®Google Scholar
• Singh, H.; Sidhu, T. S.; Karthikeyan, J.; Kalsi, S. B. S. Development and Characterization of crc–nicr Coated Superalloy by Novel Cold Spray Process. Mater. Manuf. Proc. 2016, 11, 1468–1476. DOI: 10.1080/10426914.2014.973599.
   Google Scholar
• Kalsi, S.; Sidhu, T.; Singh, H.; Karthikeyan, J. Behavior of Cold Spray Coating in Real Incineration Environment. Mater. Manuf. Proc. 2016, 31(11), 1468–1475. DOI: 10.1080/10426914.2014.912319.
   Web of Science ®Google Scholar
• Ning, X.; Wang, Q.; Ma, Z.; Kim, H. Numerical Study of In-flight Particle Parameters in Low-Pressure Cold Spray Process. J. Therm. Spray Technol. 2010, 19(6), 1211–1217. DOI: 10.1007/s11666-010-9548-2.
   Web of Science ®Google Scholar
• Poirier, D.; Legoux, J.; Drew, A.; Gauvin, R. Consolidation of Al2O3/Al Nano Composite Powder by Cold Spray. J. Therm. Spray Technol. 2011, 20(1–2), 275–285. DOI: 10.1007/s11666-010-9595-8.
   Web of Science ®Google Scholar
• Melendez, N.; Narulkar, V.; Fisher, G.; Mcdonald, A. Effect of Reinforcing Particles on the Wear Rate of Low-pressure Cold-sprayed WC-based MMC Coatings. Wear 2013, 306(1–2), 185–195. DOI: 10.1016/j.wear.2013.08.006.
   Web of Science ®Google Scholar
• Price, T. S. Cold Gas Dynamic Spraying of Titanium Coatings; PHD thesis, University of Nottingham, 2008.
   Google Scholar
• Rokni, M.; Widener, C.; Crawford, G. Microstructural Evolution of 7075 Al Gas Atomized Powder and High-Pressure Cold Sprayed Deposition. Surf. Coat. Technol. 2014, 251(29), 254–263. DOI: 10.1016/j.surfcoat.2014.04.035.
   Google Scholar
• Wang, Q.; Spencer, K.; Birbilis, N. The Influence of Ceramic Particles on Bond Strength of Cold Spray Composite Coating on AZ91 Alloy Substrate. Surf. Coat. Technol. 2010, 205(11), 50–56. DOI: 10.1016/j.surfcoat.2010.06.008.
   Google Scholar
• Raoelison, R. N.; Aubignat, E.; Planche, M. P.; Costil, S.; Langlade, C.; Liao, H. Low Pressure Cold Spraying Under 6 Bar Pressure Deposition: Exploration of High Deposition Efficiency Solutions Using a Mathematical Modelling. Surf. Coat. Technol. 2016, 302, 47–55. DOI: 10.1016/j.surfcoat.2016.05.068.
   Web of Science ®Google Scholar
• Nunthavarawong, P.; Sacks, N.; Botef, I. Effect of Powder Feed Rate on the Mechanical Properties of WC-5wt%Ni Coatings Deposited using Low Pressure Cold Spray. Int. J. Refract. Met. Hard Mater. 2016, 61(12), 230–237. DOI: 10.1016/j.ijrmhm.2016.10.001.
   Google Scholar
• Meyer, M. C.; Yin, S.; Mcdonnell, K. A.; Stier, O.; Lupoi, R. Feed Rate Effect on Particulate Acceleration in Cold Spray Under Low Stagnation Pressure Conditions. Surf. Coat. Technol. 2016, 304, 237–245. DOI: 10.1016/j.surfcoat.2016.07.017.
   Web of Science ®Google Scholar
• Kosarev, V. F.; Klinkov, S. V.; Sova, A. A. Recently Patented Facilities and Applications in Cold Spray Engineering. Recent Pat. Eng. 2007, 1(1), 35–42. DOI: 10.2174/187221207779814716.
   Google Scholar
• Raoelison, R. N.; Verdy, C.; Liao, H. L. Cold Gas Dynamic Spray Additive Manufacturing Today: Deposit Possibilities, Technological Solutions and Viable Applications. Mater. Design 2017, 133, 266–287. DOI: 10.1016/j.matdes.2017.07.067.
   Web of Science ®Google Scholar
• Shikina, N.; Podyacheva, O.; Kosarev, V.; Ismagilov, Z. Formation and Study of Porous Alumina and Catalytic Coatings by the Use of Cold Gas Dynamic Spraying Method. Mater. Manuf. Proc. 2016, 3(11), 1521–1526. DOI: 10.1080/10426914.2015.1037902.
   Google Scholar
• Atieh, M.; Mostafa, H. G. Powder Consolidation Using Cold Spray: Process Modeling and Emerging Applications. Ebook. 2016, https://download-geek.com/sign-up.html?aff.id=5992
   Google Scholar
• Singh, T. Investigation of Flow Parameters for Titanium Cold Spraying Using CFD Simulation (Thesis, Master of Engineering (ME)). University of Waikato, Hamilton, New Zealand, 2010. Retrieved from http://hdl.handle.net/10289/5002
   Google Scholar
• Sova, A.; Kosarev, V.; Papyrin, A.; Smurov, I. Effect of Ceramic Particle Velocity on Cold Spray Deposition of Metal-Ceramic Coatings. J. Therm. Spray Technol. 2011, 20(1–2), 285–293. DOI: 10.1007/s11666-010-9571-3.
   Web of Science ®Google Scholar
• Małachowska, A.; Winnicki, M.; Stachowicz, M.; Korzeniowski, M. Metallisation of Polycarbonates using a Low Pressure Cold Spray Method. Surf. Eng. 2017, 33, 1–8.
   Google Scholar
• Sova, A.; Grigoriev, S.; Okunkova, A.; Smurov, I. Potential of Cold Gas Dynamic Spray as Additive Manufacturing Technology. Int. J. Adv. Manuf. Technol. 2013, 69(9–12), 2269–2278. DOI: 10.1007/s00170-013-5166-8.
   Web of Science ®Google Scholar
• Wang, F.; Zhao, M. Simulation of Particle Deposition Behavior in Cold-Sprayed Mg Anticorrosion Coating. Mater. Manuf. Proc. 2016, 3(11), 1483–1489. DOI: 10.1080/10426914.2014.952042.
   Google Scholar
• Buhl, S.; Breuninger, P.; Sergiy Antonyuk, S. Optimization of a Laval Nozzle for Energy-Efficient Cold Spraying of Microparticles, Mater. Manuf. Proc. 2017, 11, 1–8. DOI: 10.1080/10426914.2017.1279322.
   Google Scholar
• Li, W. Y.; Liao, H. L.; Li, C.J. Numerical Simulation of Deformation Behavior of Al Particles Impacting on Al Substrate and Effect of Surface Oxide Films on Interfacial Bonding in Cold Spraying. Appl. Surf. Sci. 2007, 253(11), 5084–5091. DOI: 10.1016/j.apsusc.2006.11.020.
   Web of Science ®Google Scholar
• Huang, G.; Gu, D.; Li, X.; Xing, L. Numerical Simulation on Syphonage Effect of Laval Nozzle for Low Pressure Cold Spray System. J. Mater. Proc. Technol. 2014, 214(11), 2497–2504. DOI: 10.1016/j.jmatprotec.2014.05.014.
   Web of Science ®Google Scholar
• Price, T. S. Cold Gas Dynamic Spraying of Titanium Coatings (Thesis, Master of Engineering (ME)), University of Nottingham, 2008.
   Google Scholar
• Felice, R.; Antonello, A.; Pierpaolo, C.; Silvio, G.; Claudio, L.; Fabrizio, M. C.; Antonino, S. Selective Laser Post-Treatment on Titanium Cold Spray Coatings. Mater. Manuf. Proc. 2016, 3(11), 1500–1506. DOI: 10.1080/10426914.2015.1037912.
   Google Scholar
• Narita, Z. Introductions and Applications of Portable Low Pressure Cold Spray and Supersonic Low Pressure Cold Spray. Funct. Mater. 2009, 29(7), 52–58.
   Google Scholar
• Ogawa, K.; Ito, K.; Ichimura, K.; Ichikawa, Y.; Ohno, S.; Onda, N. Characterization of Low-Pressure Cold-Sprayed Aluminium Coatings. J. Therm. Spray Technol. 2008, 17(5–6), 728–735. DOI: 10.1007/s11666-008-9254-5.
   Web of Science ®Google Scholar
• Goyal, T.; Walia, R. S.; Sharma, P. Finite Element Modeling and Analysis of Powder Stream in Low Pressure Cold Spray Process. J. Ins. Eng. 2016, 97(3), 1–14. DOI: 10.1007/s40032-016-0234-0.
   Google Scholar
• Olakanmi, E. O. Optimization of the Quality Characteristics of Laser-Assisted Cold-Sprayed (LACS) Aluminium Coatings with Taguchi Design of Experiments (DOE). Mater. Manuf. Proc. 2016, 31(11), 1–10. DOI: 10.1080/10426914.2014.984306.
   Web of Science ®Google Scholar
• Winnicki, M.; Małachowska, A.; Dudzik, G. Numerical and Experimental Analysis of Copper Particles Velocity in Low-Pressure Cold Spraying Process. Surf. Coat. Technol. 2015, 268(1), 230–240. DOI: 10.1016/j.surfcoat.2014.11.059.
   Google Scholar