3D printed biocompatible polylactide-hydroxyapatite based material for bone implants

References

• Ratner, B. D.; Hoffman, A. S.; Schoen, F. J.; Lemons, J. E. Biomaterials Science: An Introduction to Materials in Medicine, 2nd ed. Elsevier Academic Press: San Diego, 2004.
   Google Scholar
• Petrovskaya, T. S.; Vereschagin, V. I. Effectiveness of the Technologies of Titanium Implants Covering. Key Engineering Materials 2015, 670, 183–188. doi:10.4028/www.scientific.net/KEM.670.183
   Google Scholar
• Sheikh, Z.; Sima, C.; Glogauer, M. Bone Replacement Materials and Techniques Used for Achieving Vertical Alveolar Bone Augmentation. Mater 2015, 8(6), 2953–2993. doi:10.3390/ma8062953
   Google Scholar
• Avinash, B.; Shing-Chung, W.; Srivatsan, T. S.; Njus, G. O.; Mathur, G. Processing Nethodologies for Polycaprolactone-Hydroxyapatite Composites: A Review. Materials and Manufacturing Processing 2006, 21(2), 211–218. doi:10.1081/AMP-200068681
   Web of Science ®Google Scholar
• Lee, S.; Jiang, C. Development of a Three-Dimensional Slurry Printing System USing Dynamic Mask Projection for Fabricating Zirconia Dental Implants Pages. Materials and Manufacturing Processing 2015, 30(12), 1498–1504. doi:10.1080/10426914.2014.984208
   Web of Science ®Google Scholar
• Kuroda, K.; Nakamoto, S.; Ichino, R.; Okido, M.; Robert, M. P. Hydroxyapatite Coatings on a 3D Porous Surface Using Thermal Substrate Method. Materials Transactions 2005, 46(7), 1633–1635. doi:10.2320/matertrans.46.1633
   Web of Science ®Google Scholar
• Dorozhkin, S. V. Calcium Orthophosphates Bioceramics. Ceramics International 2015, 21(10Part B), 13913–13966. doi:10.1016/j.ceramint.2015.08.004
   Google Scholar
• Dellinger, J. G.; Eurell, J. A.; Stewart, M.; Jamison, R. D. Bone Response to 3d Periodic Hydroxyapatite Scaffolds with and Without Tailored Microporosity to Deliver Bone Morphogenetic Protein 2. Journal Biomedical Materials Researcher Particle A 2006, 76(2), 366–376. doi:10.1002/jbm.a.30523
   PubMedGoogle Scholar
• Ning, X.; Xiaojian, Y.; Daixu, W.; Jian, Z.; Yuyun, C.; Guohua, X.; Dannong, H. 3d Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair. ACS Applications Materials Interfaces 2014, 6(17), 14952–14963. doi:10.1021/am502716
   PubMed Web of Science ®Google Scholar
• Jacek, J.;. Manufacturing of Instructional Aids for Students at Low Cost by Means of 3D Printing. Materials and Manufacturing Processing 2017, 32(10), 1116–1130. doi:10.1080/10426914.2016.1257135
   Web of Science ®Google Scholar
• Volova, T. G.;. Polyhydroxyalkanoates – Plastic Materials of the 21st Century: Production, Properties, Application. Nova Science Publisher: Hauppauge, 2004.
   Google Scholar
• Akkouch, A.; Zhang, Z.; Rouabhia, M. A Novel collagen/hydroxyapatite/poly(lactide-co-ε-caprolactone) Biodegradable and Bioactive 3D Porous Scaffold for Bone Regeneration. Journal Biomedical Materials Researcher Particle A 2011, 96(4), 693–704. doi:10.1002/jbm.a.33033
   PubMedGoogle Scholar
• Glotova, V. N.; Bikmullina, T. N.; Lukianov, A. E.; Novikov, V. T. Lactide and Lactic Acid Oligomer Solubility in Certain Solvents. Petrol and Coal 2016, 58(5), 585–589.
   Google Scholar
• Kurniawan, D.; Kim, B. S.; Lee, H. Y.; Lim, J. Y. Towards Improving Mechanical Properties of Basalt Fiber/Polylactic Acid Composites by Fiber Surface Treatments. Composite Interfaces 2015, 22(7), 553–562. doi:10.1080/09276440.2015.1054743
   Web of Science ®Google Scholar
• Jukkala-Partio, K.; Laitinen, O.; Vasenius, J.; Partio, E. K.; Toivonen, T.; Tervahartiala, P.; Kinnunen, J.; Rokkanen, P. Healing of Subcapital Femoral Osteotomies Fixed with Self-Reinforced Poly-L-Lactide Screws: An Experimental Long-Term Study in Sheep. Archives Orthopedic Trauma Surgery 2002, 122(6), 360–364. doi:10.1007/s00402-001-0379-y
   PubMed Web of Science ®Google Scholar
• Stenson, C.; McDonnell, K. A.; Yin, S.; Aldwell, B.; Meyer, M.; Dowling, D. P.; Lupoi, R. Cold Spray Deposition to Prevent Fouling of Polymer Surfaces. Surf Engineering 2018, 34(3), 193–204. doi:10.1080/02670844.2016.1229833
   Web of Science ®Google Scholar
• Bayer, I. S.; Megaridis, C. M.; Zhang, J.; Gamota, D.; Biswas, A. Analysis and Surface Energy Estimation of Various Model Polymeric Surfaces Using Contact Angle Hysteresis. Journal Adhesion Sciences Technical 2012, 21(15), 1439–1467. doi:10.1163/156856107782844800
   Google Scholar
• Krishnan, S.; Pandey, P.; Mohanty, S.; Nayak, S. K. Toughening of Polylactic Acid: An Overview of Research Progress Pages. Polymer-Plastics Technical Engineering 2015, 55(15), 1623–1652. doi:10.1080/03602559.2015.1098698
   Web of Science ®Google Scholar
• Park, S. A.; Lee, S. H.; Kim, W. D. Fabrication of Porous Polycaprolactone/Hydroxyapatite (Pcl/Ha) Blend Scaffolds Using A 3d Plotting System for Bone Tissue Engineering. Bioproc Biosystematics Engineering 2011, 34(4), 505–513. doi:10.1155/2014/321549
   PubMed Web of Science ®Google Scholar
• Jowsey, J.; Riggs, B. L.; Kelly, P. J. New Concept in the Treatment Of Osteoporosis. Postgraduate Medica 2016, 52(4), 62–67. doi:10.1080/00325481.1972.11713258
   Google Scholar
• Toropkov, N. E.; Vereshchagin, V. I.; Petrovskaya, T. S.; Antonkin, N. S. Influence of Synthesis Conditions on the Crystallinity of Hydroxyapatite Obtained by Chemical Deposition. IOP Conference Series: Materials Sciences Engineering 2016, 156(1), 6–13. doi:10.1088/1757-899X/156/1/012038
   Google Scholar
• Jabbari, E.; Xuezhong, E. Synthesis and Characterization of Bioresorbable In Situ Crosslinkable Ultra Low Molecular Weight Poly(Lactide) Macromere. Journal Materials Science: Materials Medica 2008, 19(1), 311–317. doi:10.1007/s10856-006-0020-2
   PubMed Web of Science ®Google Scholar
• Ferreira, D.; Duarte, T.; Alves, J. L.; Ferreira, I. Development of Low-Cost Customised Hand Prostheses by Additive Manufacturing. Plastics, Rubber Compos 2017, 47(1), 25–34. doi:10.1080/14658011.2017.1413793
   Web of Science ®Google Scholar
• Ramani, D.; Rashi, N.; Shiv, D. P.; Baskar, S. K.; Thiagarajan, H.; Thotapalli, P. S. In Vitro Study of Hydroxyapatite Coatings on Fibrin Functionalized/Pristine Graphene Oxide for Bone Grafting. Materials and Manufacturing Processing 2015, 30(6), 804–811. doi:10.1080/10426914.2014.994758
   Web of Science ®Google Scholar
• Shadjou, N.; Hasanzadeh, M.; Khalilzadeh, B. Graphene Based Scaffolds on Bone Tissue Engineering. Bioengineering 2017, 9(1), 38–47. doi:10.1080/21655979.2017.1373539
   Google Scholar
• Sopyan, I.; Rahim, T. A. Porous Magnesium-Doped Biphasic Calcium Phosphate Ceramics Prepared via Polymeric Sponge Method. Materials and Manufacturing Processing 2012, 27(6), 702–706. doi:10.1080/10426914.2011.602787
   Web of Science ®Google Scholar
• Montgomery, D.; Peck, E.; Vining, G. Introduction to Linear Regression Analysis, 5th ed. John Wiley & Sons: Hoboken, 2012.
   Google Scholar